ManualAlphaTest

- [ ] /warp
- [ ] WARP example laser simulation
- [ ] Wavelength 0.8 (adjust)
- [ ] Dynamics
- [ ] Start Simulation
- [ ] wait a few frames
- [ ] End Simulation
- [ ] /elegant
- [ ] bunchCompLSC - lattice
- [ ] Particles Per Bunch 10000 (adjust)
- [ ] Lattice
- [ ] In Beamline Editor, double click "q" 
- [ ] TOTAL [C] 1.1e-9 (adjust)
- [ ] Control
- [ ] run_setup => edit
- [ ] Use Beamline linacA or linacB
- [ ] Save Changes
- [ ] Visualization
- [ ] Start New Simulation
- [ ] Should see: `error: No charge defined for LSC.  Insert a CHARGE element in the beamline.`
- [ ] Switch back to Use Beamline linac 
- [ ] Start New Simulation
- [ ] wait for it to complete
- [ ] /srw
- [ ] Wavefront Propagation
- [ ] Young's Double Slit Experiment
- [ ] Length: 2.3265 (adjust)
- [ ] Save Changes and while recomputing go to Beamline
- [ ] W60 
- [ ] Nominal Position 60 (adjust) 
- [ ] Watch recompute
- [ ] Partially coherent
- [ ] Start new simulation then quickly switch to Source
- [ ] Beamline
- [ ] Partially Coherent
- [ ] Simulation should still be running
- [ ] End Simulation