Skip to content

CVMSI GTL

Jump to bottom
Philip Maechling edited this page May 6, 2022 · 4 revisions

CVMSI GTL

CVMSI (scientific name CVM-S4.26.M01) is version of the CVM-S4.26 tomography improved velocity model, with the CVM-S4 GTL added back in, in order to restore the low Vs values in the top 350m. It is not considered standard practice to add the elygtl to this model, but these plots show the effects if it is added. The primary reason it might be added is to reduce the high GTL values outside the CVM-S4 GTL region

The vertical profile plotted below is at location USC:

  • LAT=34.0224
  • LON=-118.2851
  • STEP=1
  • START_depth=0
  • END_depth=1000

The second plot is for a point near Ridgecrest, outside the CVM-S4 GTL region.

  • LAT=35.5
  • LON=-117.5

CVMSI

CVMSI elygtl:ely - default z

CVMSI elygtl:ely -z 0,350

Shield: CC BY 4.0

This work is licensed under a Creative Commons Attribution 4.0 International License.

CC BY 4.0

UCVM Documentation

  1. Introduction
  2. Overview and Installation
  3. Registered CVMs
    1. Model-Specific-Notes
  4. UCVM Configuration File
  5. Basic UCVM Commands
    1. Query by Elevation or Depth
    2. Ely/Jordan GTL
    3. Plotting Scripts
  6. List of Commands
    1. Manual Pages
    2. Executables
    3. Scripts
    4. Examples
  7. Tutorials
    1. ucvm_query
    2. makegrid.sh
    3. Make-Grid
    4. Adding GTL
    5. Basin-Query
    6. ucvm2mesh
    7. vs30_query
  8. UCVM-Docker
    1. Using-UCVM-Docker
  9. References
    1. UCVM Query Parameters
    2. Model Specific Query Behavior
    3. Model Specific GTLs
    4. System-specific Builds
    5. Model References
  10. Testing
    1. GTL-Testing
      1. CVM-H GTLs
      2. CVM-S5 GTLs
      3. CVM-S4 GTLs
      4. CVMSI GTLs
      5. CCA GTLs
      6. 1D GTLs
      7. BBP1D GTLs
    2. Other CVM-H-Tests
  11. Concepts
    1. GitHub Branches
    2. Vs30 Info
    3. UCVM Plotting
    4. C-API
    5. FORTRAN-API
    6. Projections
  12. Earlier Documentation
Clone this wiki locally