Increase consent check and inactivity intervals.

jvb/src/main/resources/application.conf

@@ -1,8 +1,8 @@
 # This file contains overrides for libraries JVB uses
 ice4j {
   consent-freshness {
-    // Sends "consent freshness" check every 3 seconds
-    interval = 3 seconds
+    // Sends "consent freshness" check every 5 seconds.
+    interval = 5 seconds
     // Retry max 5 times which will take up to 2500ms, that is before the next "consent freshness" transaction starts.
     max-retransmissions = 5
   }

jvb/src/main/resources/reference.conf

@@ -1,54 +1,54 @@
 videobridge {
   entity-expiration {
     # If an entity has no activity after this timeout, it is expired
-    timeout=1 minute
+    timeout = 1 minute
 
     # The interval at which the videobridge will check for expired entities
-    check-interval=${videobridge.entity-expiration.timeout}
+    check-interval = ${videobridge.entity-expiration.timeout}
   }
   health {
     # The interval between health checks
-    interval=1 minute
+    interval = 1 minute
 
     # The timeout for a health check. This needs to be higher than [interval], otherwise health checks timeout because
     # none were scheduled.
-    timeout=90 seconds
+    timeout = 90 seconds
 
     # If performing a health check takes longer than this, it is considered unsuccessful.
-    max-check-duration=3 seconds
+    max-check-duration = 3 seconds
 
     # Whether or not health check failures should be 'sticky'
     # (i.e. once the bridge becomes unhealthy, it will never
     # go back to a healthy state)
-    sticky-failures=false
+    sticky-failures = false
   }
   ep-connection-status {
     # How long we'll wait for an endpoint to *start* sending
     # data before we consider it 'inactive'
-    first-transfer-timeout=15 seconds
+    first-transfer-timeout = 15 seconds
 
     # How long an endpoint can be 'inactive' before it will
     # be considered disconnected
-    max-inactivity-limit=3 seconds
+    max-inactivity-limit = 8 seconds
 
     # How often we check endpoint's connectivity status
-    check-interval=500 milliseconds
+    check-interval = 500 milliseconds
   }
   cc {
-    bwe-change-threshold=0.15
-    thumbnail-max-height-px=180
-    onstage-ideal-height-px=1080
-    onstage-preferred-height-px=360
-    onstage-preferred-framerate=30
+    bwe-change-threshold = 0.15
+    thumbnail-max-height-px = 180
+    onstage-ideal-height-px = 1080
+    onstage-preferred-height-px = 360
+    onstage-preferred-framerate = 30
     // Whether the bridge is allowed to oversend (send the lowest layer regardless of BWE) for on-stage endpoints. If
     // allowed, it's only used when an endpoint is screensharing.
-    allow-oversend-onstage=true
+    allow-oversend-onstage = true
     // The maximum bitrate by which the estimation will be exceeded when oversending (if oversending is allowed).
-    max-oversend-bitrate=500 kbps
-    trust-bwe=true
+    max-oversend-bitrate = 500 kbps
+    trust-bwe = true
 
     # How often we check to send probing data
-    padding-period=15ms
+    padding-period = 15ms
 
     # How often we'll run bandwidth re-allocation. This is in addition to re-allocating when otherwise required (e.g.
     # a new endpoint joins or the available layers change).
@@ -143,16 +143,16 @@ videobridge {
   }
   relay {
     # Whether or not relays (octo) are enabled
-    enabled=false
+    enabled = false
 
     # A string denoting the 'region' of this JVB. This region will be used by Jicofo in the selection of a bridge for
     # a client by comparing it to the client's region.
     # Must be set when 'enabled' is true.
-    #region="us-west-1"
+    #region = "us-west-1"
 
     # The unique identifier of the jitsi-videobridge instance as a relay.
     # Must be set when 'enabled' is true.
-    #relay-id="jvb-1234"
+    #relay-id = "jvb-1234"
   }
   load-management {
     # Whether or not the reducer will be enabled to take actions to mitigate load
@@ -172,8 +172,7 @@ videobridge {
         reduction-scale = .75
         # The factor by which we'll increase the current last-n when trying to recover
         recover-scale = 1.25
-        # The minimum time in between runs of the last-n reducer to reduce or recover from
-        # load
+        # The minimum time in between runs of the last-n reducer to reduce or recover from load
         impact-time = 1 minute
         # The lowest value we'll set for last-n
         minimum-last-n-value = 1
@@ -200,22 +199,22 @@ videobridge {
   }
   sctp {
     // Whether SCTP data channels are enabled.
-    enabled=true
+    enabled = true
   }
   stats {
     // The interval at which stats are gathered.
     interval = 5 seconds
   }
   websockets {
-    enabled=false
-    server-id="default-id"
+    enabled = false
+    server-id = "default-id"
     // Whether to negotiate WebSocket compression (permessage-deflate)
     enable-compression = true
 
     // Optional, even when 'enabled' is set to true
-    #tls=true
+    #tls = true
     // The domains used when advertising a colibri-ws URL. Must be set when enabled = true
-    domains= []
+    domains = []
     // The domain used when advertising a colibri-relay-ws URL. If empty defaults to the value of `domains`.
     relay-domains = []
   }
@@ -272,7 +271,7 @@ videobridge {
       # 100pps for low-definition, last-n 20 and 2 participants talking, so
       # 2*50pps for audio, this queue is fed 300+19*100+2*50 = 2300pps, so its
       # size in terms of millis is 1024/2300*1000 ~= 445ms.
-      queue-size=1024
+      queue-size = 1024
     }
   }
 

pom.xml

@@ -105,7 +105,7 @@
             <dependency>
                 <groupId>${project.groupId}</groupId>
                 <artifactId>ice4j</artifactId>
-                <version>3.0-58-gf41542d</version>
+                <version>3.0-63-g9fe2d69</version>
             </dependency>
             <dependency>
                 <groupId>${project.groupId}</groupId>