Skip to content

General installation

Jump to bottom
Matthieu Falce edited this page May 25, 2018 · 4 revisions

Wiring

  • Any arduino can be connected to any slave
  • The panels should be at the right position (id is hardcoded, the right number id is written at the back of the panel, the GOOD one is the one on the BOTTOM)
  • The led strips should be at the right position (each wire correspond to a position)

Mechanics

  • Use some mechanical wire, do not let the weight on the electrical / network wires

Sound

  • Only the master has the sound activated, plug the speaker on the "master" computer
Clone this wiki locally