arm64: dts: zynqmp-jupiter-sdr: properly use clk-gpio mux #2596
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
nunojsa
requested review from
mhennerich,
dbogdan,
btogorean,
chegbeli,
buha,
amiclaus,
rbolboac,
danmois,
CiprianRegus and
machschmitt
as code owners
In jupiter we have a gpio to toggle between a 38.4 and 30.72MHz reference clock. We had a gpio-hog to default to the 38.4MHz source and then we need to manually change the GPIO value when applying a profile for the other reference. This is far from ideal and more importantly, with commit c2edc62 ("iio: adc: adrv9002: check and allow to change ref_clk"), we now try to change the refclk according with the rate we get from the profile (which makes sense). Therefore, with the current DT, we would fail to load the 30.72MHz reference clock based profile. Hence, let's make use of the clk-gpio driver and define our reference clock to be a clk-gpio mux with two parents for the rates we want. With this, we can change clock sources solely by loading the profile without any other manual step for the GPIO. Signed-off-by: Nuno Sa <[email protected]>
nunojsa
force-pushed
the
staging/jupiter-clk-mux
branch
from
3a8edd2
to
1c0e2c3
Compare
|
v2:
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
In jupiter we have a gpio to toggle between a 38.4 and 30.72MHz reference clock. We had a gpio-hog to default to the 38.4MHz source and then we need to manually change the GPIO value when applying a profile for the other reference. This is far from ideal and more importantly, with commit c2edc62 (" iio: adc: adrv9002: check and allow to change ref_clk"), we now try to change the refclk according with the rate we get from the profile (which makes sense). Therefore, with the current DT, we would fail to load the 30.72MHz reference clock based profile. Hence, let's make use of the clk-gpio driver and define our reference clock to be a clk-gpio mux with two parents for the rates we want. With this, we can change clock sources solely by loading the profile without any other manual step for the GPIO.
PR Type
PR Checklist