[bsp][airm2m/air105][rsoc] Fix compilation issues with bsp of airm2m/air105

.github/workflows/bsp_buildings.yml

@@ -101,6 +101,7 @@ jobs:
                 - "rm48x50"
                 - "ht32/ht32f52352"
                 - "ht32/ht32f12366"
+                - "airm2m/air105"
                 - "w60x"
                 - "essemi/es32f0654"
                 - "essemi/es32f365x"

.github/workflows/manual_trigger_scons_except_STM32_all.yml

@@ -43,7 +43,7 @@ jobs:
        legs:
           - {RTT_BSP_NAME: "acm32_acm32f0x0-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "acm32/acm32f0x0-nucleo"} 
           - {RTT_BSP_NAME: "acm32_acm32f4xx-nucleo", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "acm32/acm32f4xx-nucleo"} 
-         #- {RTT_BSP_NAME: "airm2m_air105", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "airm2m/air105"}  #scons fail in last step
+          - {RTT_BSP_NAME: "airm2m_air105", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "airm2m/air105"}
           - {RTT_BSP_NAME: "airm2m_air32f103", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "airm2m/air32f103"}
          #- {RTT_BSP_NAME: "allwinner_d1", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "allwinner/d1"}   # rt-smart fail toolchain
          #- {RTT_BSP_NAME: "allwinner_d1s", RTT_TOOL_CHAIN: "sourcery-arm", RTT_BSP: "allwinner/d1s"}  #toochain

bsp/airm2m/air105/board/board.c

@@ -1,14 +1,17 @@
 /*
- * Copyright (c) 2006-2022, RT-Thread Development Team
+ * Copyright (c) 2006-2024 RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
  * Change Logs:
  * Date           Author       Notes
  * 2022-02-22     airm2m       first version
  */
-
 #include "board.h"
+#include "drv_common.h"
+#include "drv_gpio.h"
+#include "drv_usart_v2.h"
+
 uint32_t SystemCoreClock;
 extern const uint32_t __isr_start_address;
 
@@ -38,7 +41,7 @@ void SystemInit(void)
     __enable_irq();
 }
 
-void SystemCoreClockUpdate (void)            /* Get Core Clock Frequency      */
+void SystemCoreClockUpdate (void)            /* Get Core Clock Frequency */
 {
     SystemCoreClock = HSE_VALUE * (((SYSCTRL->FREQ_SEL & SYSCTRL_FREQ_SEL_XTAL_Mask) >> SYSCTRL_FREQ_SEL_XTAL_Pos) + 1);
 }
@@ -56,7 +59,7 @@ void rt_hw_board_init(void)
     rt_hw_systick_init();
     DMA_GlobalInit();
     Uart_GlobalInit();
-    DMA_TakeStream(DMA1_STREAM_1);//for qspi
+    DMA_TakeStream(DMA1_STREAM_1);/* for qspi */
     CoreTick_Init();
 #ifdef RT_USING_PIN
     rt_hw_pin_init();

bsp/airm2m/air105/libraries/HAL_Driver/Inc/core_irq.h

@@ -21,14 +21,14 @@
 
 #ifndef __CORE_IRQ_H__
 #define __CORE_IRQ_H__
-
+#include <stdint.h>
 /**
  * @brief 设置中断回调函数
  *
  * @param Irq 中断号 0~IRQ_LINE_MAX
  * @param Handler 中断回调函数，如 void Irq_Handler(uint32_t IrqLine, void *pData); 可以多个中断号对应1个中断函数，回调时传入中断号和用户数据
  */
-void ISR_SetHandler(int32_t Irq, void *Handler);
+void ISR_SetHandler(int32_t Irq, void *Handler, void *pData);
 /**
  * @brief 设置中断优先级
  *

bsp/airm2m/air105/libraries/HAL_Driver/Src/core_dma.c

@@ -18,11 +18,11 @@
  * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
-
+#include "core_irq.h"
 #include "user.h"
 typedef struct
 {
-    const DMA_TypeDef *RegBase;
+    DMA_TypeDef *RegBase;
     const uint32_t Index;
     CBFuncEx_t CB;
     void *pData;
@@ -65,17 +65,17 @@ typedef struct
 
 /************ operation definition for DMA  DMA_CFG_L REGISTER ************/
 #define DMA_CFG_HS_SEL_SRC_Pos                              (11)
-#define DMA_CFG_HS_SEL_SRC_Mask                             (0x01U<<DMA_CFG_HS_SEL_SRC_Pos)//0 HARD 1 SOFT
+#define DMA_CFG_HS_SEL_SRC_Mask                             (0x01U<<DMA_CFG_HS_SEL_SRC_Pos)/*0 HARD 1 SOFT*/
 
 #define DMA_CFG_HS_SEL_DST_Pos                              (10)
 #define DMA_CFG_HS_SEL_DST_Mask                             (0x01U<<DMA_CFG_HS_SEL_DST_Pos)
 
 /************ operation definition for DMA  DMA_CFG_H REGISTER ************/
 #define DMA_CFG_DEST_PER_Pos                                (11)
-#define DMA_CFG_DEST_PER_Mask                               (0x07U<<DMA_CFG_DEST_PER_Pos)//need write current channel num
+#define DMA_CFG_DEST_PER_Mask                               (0x07U<<DMA_CFG_DEST_PER_Pos)/*need write current channel num*/
 
 #define DMA_CFG_SRC_PER_Pos                                 (7)
-#define DMA_CFG_SRC_PER_Mask                                (0x07U<<DMA_CFG_SRC_PER_Pos)//need write current channel num
+#define DMA_CFG_SRC_PER_Mask                                (0x07U<<DMA_CFG_SRC_PER_Pos)/*need write current channel num*/
 
 /************ operation definition for DMA  DMA_LLP_L REGISTER ************/
 #define DMAC_LLP_NEXT_LLI_MSK                                   (0x3)
@@ -212,7 +212,7 @@ int DMA_ConfigStream(uint8_t Stream, void *Config)
                 (DMA_InitStruct->DMA_PeripheralDataSize << DMA_CTL_DST_TR_WIDTH_Pos);
 
         hwDMAChannal[Stream].TxDir = 1;
-//      hwDMA->CFG_L = (1 << 18);
+        /* hwDMA->CFG_L = (1 << 18); */
         hwDMA->CFG_L = 0;
         break;
     default:
@@ -333,7 +333,7 @@ uint32_t DMA_GetDataLength(uint8_t Stream, uint32_t FirstAddress)
 static void DMA_IrqHandle(int32_t IrqLine, void *pData)
 {
     uint32_t i;
-//  DBG("%x", DMA->StatusTfr_L);
+    /* DBG("%x", DMA->StatusTfr_L); */
     if (DMA->StatusInt_L & (1 << 0))
     {
         for(i = 0; i < DMA_STREAM_QTY; i++)
@@ -352,7 +352,7 @@ static void DMA_IrqHandle(int32_t IrqLine, void *pData)
             if (DMA->StatusErr_L & (1 << i))
             {
                 DMA->ClearErr_L = (1 << i);
-                hwDMAChannal[i].CB(hwDMAChannal[i].pData, 0xffffffff);
+                hwDMAChannal[i].CB(hwDMAChannal[i].pData, (void *)0xffffffff);
             }
         }
     }

bsp/airm2m/air105/libraries/rt_drivers/drv_common.h

@@ -29,6 +29,12 @@ void _Error_Handler(char *s, int num);
 
 #define DMA_NOT_AVAILABLE ((DMA_INSTANCE_TYPE *)0xFFFFFFFFU)
 
+/**
+ * This function is mainly used for SysTick initialization
+ *
+ */
+void rt_hw_systick_init(void);
+
 #ifdef __cplusplus
 }
 #endif

bsp/airm2m/air105/makesoc.py

@@ -1,9 +1,7 @@
-
 import os
 import sys
 import shutil
-import urllib
-
+import urllib.request
 out_path='./'
 bin_file_name='rtthread.bin'
 pack_path='./pack'
@@ -17,13 +15,14 @@
         os.remove(out_file+'.soc')
 
     if not os.path.exists(pack_path+'/bootloader.bin'):
-        urllib.urlretrieve("http://cdndownload.openluat.com/rt-thread/airm2m/air105/bootloader.bin", pack_path+'/bootloader.bin')
+        urllib.request.urlretrieve("http://cdndownload.openluat.com/rt-thread/airm2m/air105/bootloader.bin", pack_path + '/bootloader.bin')
 
     if not os.path.exists(pack_path+'/soc_download.exe'):
-        urllib.urlretrieve("http://cdndownload.openluat.com/rt-thread/airm2m/air105/soc_download.exe", pack_path+'/soc_download.exe')
+        urllib.request.urlretrieve("http://cdndownload.openluat.com/rt-thread/airm2m/air105/bootloader.bin", pack_path + '/bootloader.bin')
 
     shutil.copy(out_path+bin_file_name, pack_path+'/'+bin_file_name)
     shutil.make_archive(out_file, 'zip', root_dir=pack_path)
     os.remove(pack_path+'/'+bin_file_name)
     os.rename(out_file+'.zip',out_file+'.soc')
+
     print('end')