Rename SAMPLES to GATE_DURATION #424
Triggered via pull request
September 20, 2023 11:58
Araneidae
Status
Success
Total duration
4h 49m 16s
Artifacts
–
This run and associated checks have been archived and are scheduled for deletion.
Learn more about checks retention
code.yml
on: pull_request
Start self hosted aws runner
1m 23s
Matrix: make_boot
Matrix: make_zpkg
test
2h 23m
Matrix: make zpkg on aws
release
0s
Stop self hosted EC2 runnner
5s
Annotations
57 warnings
|
Start self hosted aws runner
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Start self hosted aws runner
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
setup rclone and mount on runner
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make zpkg on aws (xu5_st1-fmc_acq430)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make zpkg on aws (xu5_st1-fmc_acq430)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make zpkg on aws (xu5_st1-fmc_acq430)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make zpkg on aws (xu5_st1-fmc_acq430)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make zpkg on aws (xu5_st1-fmc_acq430)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_boot (zynq, PandABox-no-fmc)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_boot (zynq, PandABox-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_boot (zynq, PandABox-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_boot (zynq, PandABox-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make zpkg on aws (xu5_st1-no-fmc)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make zpkg on aws (xu5_st1-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make zpkg on aws (xu5_st1-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make zpkg on aws (xu5_st1-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make zpkg on aws (xu5_st1-no-fmc)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make_boot (zynqmp, xu5_st1-no-fmc)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_boot (zynqmp, xu5_st1-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_boot (zynqmp, xu5_st1-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_boot (zynqmp, xu5_st1-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq430)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_zpkg (PandABox-fmc_acq430)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq430)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq430)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq430)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make_zpkg (PandABox-fmc_acq427)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_zpkg (PandABox-fmc_acq427)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq427)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq427)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_acq427)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make_zpkg (ZedBoard-no-fmc)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_zpkg (ZedBoard-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (ZedBoard-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (ZedBoard-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (ZedBoard-no-fmc)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make_zpkg (PandABox-no-fmc)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_zpkg (PandABox-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-no-fmc)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-no-fmc)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
test
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
test
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
test
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_24vio)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_zpkg (PandABox-fmc_24vio)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_24vio)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_24vio)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_24vio)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make_zpkg (PandABox-fmc_lback-sfp_lback)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, docker/login-action@v1, actions/upload-artifact@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
make_zpkg (PandABox-fmc_lback-sfp_lback)
No files were found with the provided path: ./build/PandA-FPGA/panda-fpga@*.zpg. No artifacts will be uploaded.
|
|
make_zpkg (PandABox-fmc_lback-sfp_lback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_lback-sfp_lback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
make_zpkg (PandABox-fmc_lback-sfp_lback)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Stop self hosted EC2 runnner
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Stop self hosted EC2 runnner
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|