Add Holybro H-Flow

boards/holybro/h-flow/canbootloader.px4board

@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y

boards/holybro/h-flow/default.px4board

@@ -0,0 +1,31 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_DRIVERS_OPTICAL_FLOW_PAA3905=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_UAVCANNODE_FLOW_MEASUREMENT=y
+CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_ACCELERATION is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
+# CONFIG_SENSORS_VEHICLE_MAGNETOMETER is not set
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/holybro/h-flow/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 87,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the Holybro H-Flow board",
+    "image": "",
+    "build_time": 0,
+    "summary": "Holybro-H-Flow",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/holybro/h-flow/init/rc.board_sensors

@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+
+param set-default IMU_GYRO_RATEMAX 1000
+param set-default SENS_IMU_CLPNOTI 0
+
+# SPI 1
+icm42688p -R 0 -s start
+
+# SPI 2
+paa3905 -s start -Y 180
+
+# SPI 3
+afbrs50 start

boards/holybro/h-flow/nuttx-config/canbootloader/defconfig

@@ -0,0 +1,56 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/h-flow/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000

boards/holybro/h-flow/nuttx-config/include/board.h

@@ -0,0 +1,146 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <[email protected]>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+
+#define STM32_BOARD_XTAL        16000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_BOARD_USEHSE      1
+
+#define STM32_LSE_FREQUENCY     0
+
+/* PLL source is HSE
+ * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ *         = (16'000'000 / 16) * 384
+ *         = 384'000'000
+ * SYSCLK  = PLL_VCO / PLLP
+ *         = 384'000'000 / 4 = 96,000,000
+ */
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(16)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART1_RX	GPIO_USART1_RX_1
+#define GPIO_USART1_TX	GPIO_USART1_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_2 /* PB8 */
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_2 /* PB9 */
+
+/* SPI */
+#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1 /* PA6 */
+#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1 /* PA7 */
+#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1 /* PA5 */
+
+#define GPIO_SPI2_MISO  GPIO_SPI2_MISO_1 /* PB14 */
+#define GPIO_SPI2_MOSI  GPIO_SPI2_MOSI_1 /* PB15 */
+#define GPIO_SPI2_SCK   GPIO_SPI2_SCK_2  /* PB13 */
+
+#define GPIO_SPI3_MISO  GPIO_SPI3_MISO_1 /* PB4 */
+#define GPIO_SPI3_MOSI  GPIO_SPI3_MOSI_1 /* PB5 */
+#define GPIO_SPI3_SCK   GPIO_SPI3_SCK_1  /* PB3 */
+
+#endif /* __ARCH_BOARD_BOARD_H */

boards/holybro/h-flow/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,47 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2024 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX   // DMA1, Stream 3, Channel 0
+#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX   // DMA1, Stream 4, Channel 0
+
+#define DMACHAN_SPI3_RX    DMAMAP_SPI3_RX_1   // DMA1, Stream 0, Channel 0
+#define DMACHAN_SPI3_TX    DMAMAP_SPI3_TX_1   // DMA1, Stream 5, Channel 0
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_2   // DMA2, Stream 2, Channel 3
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3