modules needed by wms should not use config_loader

docs/samples/automation/retriever.py

@@ -39,6 +39,7 @@
 
 import mslib
 import mslib.utils
+from mslib.utils.get_projection_params import get_projection_params
 from mslib.utils import thermolib
 from mslib.utils.config import config_loader, read_config_file
 from mslib.utils.units import units
@@ -140,8 +141,7 @@ def main():
     fig = plt.figure()
     for flight, section, vertical, filename, init_time, time in \
             config["automated_plotting"]["flights"]:
-        params = mslib.utils.coordinate.get_projection_params(
-            config["predefined_map_sections"][section]["CRS"].lower())
+        params = get_projection_params(config["predefined_map_sections"][section]["CRS"].lower())
         params["basemap"].update(config["predefined_map_sections"][section]["map"])
         wps = load_from_ftml(filename)
         wp_lats, wp_lons, wp_locs = [[x[i] for x in wps] for i in [0, 1, 3]]

mslib/msui/editor.py

@@ -37,8 +37,7 @@
 from mslib.msui.icons import icons
 from mslib.utils.config import MSUIDefaultConfig as mss_default
 from mslib.utils.config import config_loader, dict_raise_on_duplicates_empty, merge_dict
-from mslib.utils.coordinate import get_projection_params
-
+from mslib.utils.get_projection_params import get_projection_params
 
 from mslib.support.qt_json_view import delegate
 from mslib.support.qt_json_view.view import JsonView

mslib/msui/flighttrack.py

@@ -46,7 +46,8 @@
 
 from mslib import __version__
 from mslib.utils.units import units
-from mslib.utils.coordinate import find_location, path_points, get_distance
+from mslib.utils.coordinate import path_points, get_distance
+from mslib.utils.find_location import find_location
 from mslib.utils import thermolib
 from mslib.utils.verify_waypoint_data import verify_waypoint_data
 from mslib.utils.config import config_loader, save_settings_qsettings, load_settings_qsettings

mslib/msui/mpl_pathinteractor.py

@@ -51,7 +51,8 @@
 import matplotlib.patches as mpatches
 from PyQt5 import QtCore, QtWidgets
 
-from mslib.utils.coordinate import get_distance, find_location, latlon_points, path_points
+from mslib.utils.coordinate import get_distance, latlon_points, path_points
+from mslib.utils.find_location import find_location
 from mslib.utils.units import units
 from mslib.utils.thermolib import pressure2flightlevel
 from mslib.msui import flighttrack as ft

mslib/msui/topview.py

@@ -32,7 +32,7 @@
 import logging
 
 from mslib.utils.config import config_loader
-from mslib.utils.coordinate import get_projection_params
+from mslib.utils.get_projection_params import get_projection_params
 from PyQt5 import QtGui, QtWidgets, QtCore
 from mslib.msui.qt5 import ui_topview_window as ui
 from mslib.msui.qt5 import ui_topview_mapappearance as ui_ma

mslib/mswms/mpl_hsec.py

@@ -42,7 +42,7 @@
 import PIL.Image
 
 from mslib.mswms import mss_2D_sections
-from mslib.utils.coordinate import get_projection_params
+from mslib.utils.get_projection_params import get_projection_params
 from mslib.utils.units import convert_to
 from mslib.mswms.utils import make_cbar_labels_readable
 from mslib.utils.loggerdef import configure_mpl_logger

mslib/mswms/wms.py

@@ -143,7 +143,7 @@ def verify_pw(username, password):
         return authfunc(username, password)
 
 from mslib.mswms import mss_plot_driver
-from mslib.utils.coordinate import get_projection_params
+from mslib.utils.get_projection_params import get_projection_params
 
 # Logging the Standard Output, which will be added to the Apache Log Files
 logging.basicConfig(level=logging.DEBUG,

mslib/utils/coordinate.py

@@ -26,16 +26,12 @@
     limitations under the License.
 """
 
-import logging
 import netCDF4 as nc
 import numpy as np
 from pyproj import Geod
 from scipy.interpolate import interp1d
 from scipy.ndimage import map_coordinates
 
-from mslib.utils.config import config_loader
-
-
 __PR = Geod(ellps='WGS84')
 
 
@@ -54,23 +50,6 @@ def get_distance(lat0, lon0, lat1, lon1):
     return __PR.inv(lon0, lat0, lon1, lat1)[-1] / 1000.
 
 
-def find_location(lat, lon, tolerance=5):
-    """
-    Checks if a location is present at given coordinates
-    :param lat: latitude
-    :param lon: longitude
-    :param tolerance: maximum distance between location and coordinates in km
-    :return: None or lat/lon, name
-    """
-    locations = config_loader(dataset='locations')
-    distances = sorted([(get_distance(lat, lon, loc_lat, loc_lon), loc)
-                        for loc, (loc_lat, loc_lon) in locations.items()])
-    if len(distances) > 0 and distances[0][0] <= tolerance:
-        return locations[distances[0][1]], distances[0][1]
-    else:
-        return None
-
-
 def fix_angle(ang):
     """
     Normalizes an angle between -180 and 180 degree.
@@ -107,127 +86,6 @@ def rotate_point(point, angle, origin=(0, 0)):
     return temp_point
 
 
-def get_projection_params(proj):
-    proj = proj.lower()
-    if proj.startswith("crs:"):
-        projid = proj[4:]
-        if projid == "84":
-            proj_params = {
-                "basemap": {"projection": "cyl"},
-                "bbox": "degree"}
-        else:
-            raise ValueError("Only CRS code 84 is supported: '%s' given", proj)
-
-    elif proj.startswith("auto:"):
-        raise ValueError("AUTO not supported")
-
-        projid, unitsid, lon0, lat0 = proj[5:].split(",")
-        if projid == "42001":
-            proj_params = {
-                "basemap": {"projection": "tmerc", "lon_0": lon0, "lat_0": lat0},
-                "bbox": f"meter({lon0},{lat0})"}
-        elif projid == "42002":
-            proj_params = {
-                "basemap": {"projection": "tmerc", "lon_0": lon0, "lat_0": lat0},
-                "bbox": f"meter({lon0},{lat0})"}
-        elif projid == "42003":
-            proj_params = {
-                "basemap": {"projection": "ortho", "lon_0": lon0, "lat_0": lat0},
-                "bbox": f"meter({lon0},{lat0})"}
-        else:
-            raise ValueError("unspecified AUTO code: '%s'", proj)
-
-    elif proj.startswith("auto2:"):
-        raise ValueError("AUTO2 not supported")
-
-        projid, factor, lon0, lat0 = proj[6:].split(",")
-        if projid == "42001":
-            proj_params = {
-                "basemap": {"projection": "tmerc", "lon_0": lon0, "lat_0": lat0},
-                "bbox": f"meter({lon0},{lat0})"}
-        elif projid == "42002":
-            proj_params = {
-                "basemap": {"projection": "tmerc", "lon_0": lon0, "lat_0": lat0},
-                "bbox": f"meter({lon0},{lat0})"}
-        elif projid == "42003":
-            proj_params = {
-                "basemap": {"projection": "ortho", "lon_0": lon0, "lat_0": lat0},
-                "bbox": f"meter({lon0},{lat0})"}
-        elif projid == "42004":
-            proj_params = {
-                "basemap": {"projection": "cyl"},
-                "bbox": f"meter({lon0},{lat0})"}
-        elif projid == "42005":
-            proj_params = {
-                "basemap": {"projection": "moll", "lon_0": lon0, "lat_0": lat0},
-                "bbox": "meter???"}
-        else:
-            raise ValueError("unspecified AUTO2 code: '%s'", proj)
-
-    elif proj.startswith("epsg:"):
-        epsg = proj[5:]
-        if epsg.startswith("777") and len(epsg) == 8:  # user defined MSS code. deprecated.
-            logging.warning("Using deprecated MSS-specific EPSG code. Switch to 'MSS:stere' instead.")
-            lat_0, lon_0 = int(epsg[3:5]), int(epsg[5:])
-            proj_params = {
-                "basemap": {"projection": "stere", "lat_0": lat_0, "lon_0": lon_0},
-                "bbox": "degree"}
-        elif epsg.startswith("778") and len(epsg) == 8:  # user defined MSS code. deprecated.
-            logging.warning("Using deprecated MSS-specific EPSG code. Switch to 'MSS:stere' instead.")
-            lat_0, lon_0 = int(epsg[3:5]), int(epsg[5:])
-            proj_params = {
-                "basemap": {"projection": "stere", "lat_0": -lat_0, "lon_0": lon_0},
-                "bbox": "degree"}
-        elif epsg in ("4258", "4326"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "degree"}
-        elif epsg in ("3031", "3412"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "meter(0,-90)"}
-        elif epsg in ("3411", "3413", "3575", "3995"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "meter(0,90)"}
-        elif epsg in ("3395", "3857"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "meter(0,0)"}
-        elif epsg in ("4839"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "meter(10.5,51)"}
-        elif epsg in ("31467"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "meter(-20.9631343,0.0037502)"}
-        elif epsg in ("31468"):
-            proj_params = {"basemap": {"epsg": epsg}, "bbox": "meter(-25.4097892,0.0037466)"}
-        else:
-            raise ValueError("EPSG code not supported by basemap module: '%s'", proj)
-
-    elif proj.startswith("mss:"):
-        # some MSS-specific codes
-        params = proj[4:].split(",")
-        name = params[0]
-        if name == "stere":
-            lon0, lat0, lat_ts = params[1:]
-            proj_params = {
-                "basemap": {"projection": name, "lat_0": lat0, "lon_0": lon0, "lat_ts": lat_ts},
-                "bbox": "degree"}
-        elif name == "cass":
-            lon0, lat0 = params[1:]
-            proj_params = {
-                "basemap": {"projection": name, "lon_0": lon0, "lat_0": lat0},
-                "bbox": "degree"}
-        elif name == "lcc":
-            lon0, lat0, lat1, lat2 = params[1:]
-            proj_params = {
-                "basemap": {"projection": name, "lon_0": lon0, "lat_0": lat0, "lat_1": lat1, "lat_2": lat2},
-                "bbox": "degree"}
-        elif name == "merc":
-            lat_ts = params[1]
-            proj_params = {
-                "basemap": {"projection": name, "lat_ts": lat_ts},
-                "bbox": "degree"}
-        else:
-            raise ValueError("unknown MSS projection: '%s'", proj)
-
-    else:
-        raise ValueError("unknown projection: '%s'", proj)
-    logging.debug("Identified CRS '%s' as '%s'", proj, proj_params)
-    return proj_params
-
-
 def interpolate_vertsec(data3D, data3D_lats, data3D_lons, lats, lons):
     """
     Interpolate curtain[z,pos] (curtain[level,pos]) from data3D[z,y,x]

mslib/utils/find_location.py

@@ -0,0 +1,47 @@
+# -*- coding: utf-8 -*-
+"""
+
+    mslib.utils.find_location
+    ~~~~~~~~~~~~~~~~~~~~~~~~~
+
+    Shows the name of a lat/lon coordinate
+
+    This file is part of MSS.
+
+    :copyright: Copyright 2021 May Bär
+    :copyright: Copyright 2021-2024 by the MSS team, see AUTHORS.
+    :license: APACHE-2.0, see LICENSE for details.
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+"""
+
+
+from mslib.utils.config import config_loader
+from mslib.utils.coordinate import get_distance
+
+
+def find_location(lat, lon, tolerance=5):
+    """
+    Checks if a location is present at given coordinates
+    :param lat: latitude
+    :param lon: longitude
+    :param tolerance: maximum distance between location and coordinates in km
+    :return: None or lat/lon, name
+    """
+    locations = config_loader(dataset='locations')
+    distances = sorted([(get_distance(lat, lon, loc_lat, loc_lon), loc)
+                        for loc, (loc_lat, loc_lon) in locations.items()])
+    if len(distances) > 0 and distances[0][0] <= tolerance:
+        return locations[distances[0][1]], distances[0][1]
+    else:
+        return None