TST: speed up env resolution with uv

.github/workflows/bleeding-edge.yaml

@@ -26,30 +26,31 @@ jobs:
     steps:
     - name: Checkout repo
       uses: actions/checkout@v4
-
     - name: Set up Python (newest testable version)
       uses: actions/setup-python@v5
       with:
         python-version: 3.12-dev
+    - uses: yezz123/setup-uv@v4
+      with:
+        uv-version: 0.2.18
+        uv-venv: .venv
 
     - name: Install dependencies
       run: |
-        python -m pip install --upgrade pip
-        python -m pip install --upgrade setuptools wheel
-        python -m pip install --pre --only-binary ":all:" numpy \
-         --extra-index https://pypi.anaconda.org/scientific-python-nightly-wheels/simple
-        python -m pip install --pre Cython
+        uv pip install --upgrade setuptools wheel
+        uv pip install --pre --only-binary ":all:" numpy \
+         --extra-index-url https://pypi.anaconda.org/scientific-python-nightly-wheels/simple
+        uv pip install --pre Cython
 
     - name: Build
       # --no-build-isolation is used to guarantee that build time dependencies
       # are not installed by pip as specified from pyproject.toml, hence we get
       # to use the dev version of numpy at build time.
       run: |
-        python setup.py build_ext -q -j2
-        python -m pip install -e . --no-build-isolation
-        python -m pip install --upgrade --pre pytest
+        uv pip install -e . --no-build-isolation
+        uv pip install --upgrade --pre pytest
 
-    - run: python -m pip list
+    - run: uv pip list
 
     - name: Run Tests
       run: |

.github/workflows/build-test.yaml

@@ -42,26 +42,27 @@ jobs:
     runs-on: ${{ matrix.os }}
 
     steps:
+    - name: Checkout repo
+      uses: actions/checkout@v4
     - name: Set up Python
       uses: actions/setup-python@v5
       with:
         python-version: ${{ matrix.python-version }}
-    - name: Checkout repo
-      uses: actions/checkout@v4
+    - uses: yezz123/setup-uv@v4
+      with:
+        uv-version: 0.2.18
+        uv-venv: .venv
 
-    - run: |
-        python -m pip install --upgrade pip
-        python -m pip install --requirement test_requirements.txt
+    - run: uv pip install --requirement test_requirements.txt
 
     - if: matrix.deps == 'minimal'
       run: |
-        pipx run uv pip compile pyproject.toml --resolution=lowest-direct > mindeps.txt
-        python -m pip install --requirement mindeps.txt
+        uv pip compile pyproject.toml --resolution=lowest-direct | uv pip install -r -
 
     - name: Build
-      run: python -m pip install --editable "."
+      run: uv pip install --editable "."
 
-    - run: python -m pip list
+    - run: uv pip list
 
     - name: Run Tests
       run: pytest --color=yes

.github/workflows/wheels.yaml

@@ -29,18 +29,18 @@ jobs:
     - name: Checkout repo
       uses: actions/checkout@v4
 
+    - uses: yezz123/setup-uv@v4
+      with:
+        uv-version: 0.2.18
+        uv-venv: .venv
+
     - name: Build wheels for CPython
       uses: pypa/[email protected]
       with:
         output-dir: dist
       env:
-        CIBW_BUILD: cp39-* cp310-* cp311-* cp312-*
-        CIBW_ARCHS_LINUX: x86_64
-        MACOSX_DEPLOYMENT_TARGET: '10.9'   # as of CIBW 2.9, this is the default value, pin it so it can't be bumped silently
-        CIBW_ARCHS_WINDOWS: auto64
-        CIBW_BUILD_VERBOSITY: 1
         CIBW_TEST_COMMAND: >
-          python -m pip install -r {project}/test_requirements.txt
+          uv pip install -r {project}/test_requirements.txt
           && pytest --pyargs ewah_bool_utils --color=yes
 
     - uses: actions/upload-artifact@v4
@@ -74,21 +74,22 @@ jobs:
       uses: actions/setup-python@v5
       with:
         python-version: 3.x
+    - uses: yezz123/setup-uv@v4
+      with:
+        uv-version: 0.2.18
+        uv-venv: .venv
     - name: install check-manifest
-      run: |
-        python -m pip install --upgrade pip
-        python -m pip install check-manifest
+      run: uv pip install check-manifest
     - name: Install build time dependencies
       shell: bash
       run: |
-        python -m pip install "Cython>=3.0,<3.1"
-        python -m pip install oldest-supported-numpy
-        python -m pip install --upgrade wheel
-        python -m pip install --upgrade setuptools
+        uv pip install "Cython>=3.0,<3.1"
+        uv pip install oldest-supported-numpy
+        uv pip install --upgrade wheel
+        uv pip install --upgrade setuptools
     - name: Build
       shell: bash
-      run: |
-        python -m pip install --no-build-isolation .
+      run: uv pip install --no-build-isolation .
     - name: Init submodules
       uses: snickerbockers/submodules-init@v4
     - name: run check-manifest

pyproject.toml

@@ -82,3 +82,22 @@ select = [
 
 [tool.ruff.lint.isort]
 combine-as-imports = true
+
+[tool.cibuildwheel]
+build = "cp39-* cp310-* cp311-* cp312-*"
+build-frontend = "build[uv]"
+build-verbosity = 1
+test-skip = "*-musllinux*"
+test-command = [
+    "uv pip install -r {project}/test_requirements.txt",
+    "pytest --pyargs {project} --color=yes -ra",
+]
+
+[tool.cibuildwheel.linux]
+archs = "x86_64"
+
+[tool.cibuildwheel.macos]
+archs = "auto64"
+
+[tool.cibuildwheel.windows]
+archs = "auto64"