Skip to content

ucsdsysnet/verilog-pcie

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Verilog PCI Express Components Readme

Build Status

For more information and updates: http://alexforencich.com/wiki/en/verilog/pcie/start

GitHub repository: https://github.com/alexforencich/verilog-pcie

Introduction

Collection of PCI express related components. Includes PCIe to AXI and AXI lite bridges, a simple PCIe AXI DMA engine, and a flexible, high-performance DMA subsystem. Currently supports operation with the Xilinx Ultrascale and Ultrascale Plus PCIe hard IP cores with interfaces between 64 and 512 bits. Includes full cocotb testbenches that utilize cocotbext-axi.

Documentation

PCIe AXI and AXI lite master

The pcie_us_axi_master and pcie_us_axil_master modules provide a bridge between PCIe and AXI. These can be used to implement PCIe BARs. The pcie_us_axil_master module is a very simple module for providing register access, supporting only 32 bit operations. The pcie_us_axi_master module is more complex, converting PCIe operations to AXI bursts. It can be used to terminate device-to-device DMA operations with reasonable performance. The pcie_us_axis_cq_demux module can be used to demultiplex PCIe operations based on the target BAR.

PCIe AXI DMA

The pcie_us_axi_dma module provides a DMA engine with an internal AXI interface. The AXI interface width must match the PCIe interface width. The module directly translates AXI operations into PCIe operations. As a result, it is relatively simple, but the performance is limited due to the constraints of the AXI interface. Backpressure on the AXI interface is also passed through to the PCIe interface.

The pcie_axi_dma_desc_mux module can be used to share the AXI DMA module between multiple request sources.

Flexible DMA subsystem

The split DMA interface/DMA client modules support highly flexible, highly performant DMA operations. The DMA interface and DMA client modules are connected by dual port RAMs with a high performance segmented memory interface. The segmented memory interface is a better 'impedance match' to the PCIe hard core interface - data realignment can be done in the same clock cycle; no bursts, address decoding, arbitration, or reordering simplifies implementation and provides much higher performance than AXI. The architecture is also quite flexible as it decouples the DMA interface from the clients with dual port RAMs, enabling mixing different client interface types and widths and even supporting clients running in different clock domains without datapath FIFOs.

DMA system block diagram

The dma_if_pcie_us module connects the Xilinx Ultrascale PCIe interface to the segmented memory interface. Currently, it does not support TLP straddling, but it should be possible to support this with the segmented interface.

The dma_psdpram module is a dual clock, parallel simple dual port RAM module with a segmented interface. The depth is independently adjustable from the address width, simplifying use of the segmented interface. The module also contains a parametrizable output pipeline register to improve timing.

The dma_if_mux module enables sharing the DMA interface across several DMA clients. This module handles the tags and select lines appropriately on both the descriptor and segmented memory interface for plug-and-play operation without address assignment - routing is completely determined by component connections. The module also contains a FIFO to maintain read data ordering across multiple clients. Make sure to equalize pipeline delay across all paths for maximum performance.

DMA client modules connect the segmented memory interface to different internal interfaces.

The dma_client_axis_source and dma_client_axis_sink modules provide support for streaming DMA over AXI stream. The AXI stream width can be any power of two fraction of the segmented memory interface width.

arbiter module

General-purpose parametrizable arbiter. Supports priority and round-robin arbitration. Supports blocking until request release or acknowledge.

axis_arb_mux module

Frame-aware AXI stream arbitrated muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.

dma_client_axis_sink module

AXI stream sink DMA client module. Uses a segmented memory interface.

dma_client_axis_source module

AXI stream source DMA client module. Uses a segmented memory interface.

dma_if_mux module

DMA interface mux module. Enables sharing a DMA interface module between multiple DMA client modules. Wrapper for dma_if_mux_rd and dma_if_mux_wr.

dma_if_mux_rd module

DMA interface mux module. Enables sharing a DMA interface module between multiple DMA client modules. Muxes descriptors and demuxes memory writes.

dma_if_mux_wr module

DMA interface mux module. Enables sharing a DMA interface module between multiple DMA client modules. Muxes descriptors, demuxes memory read commands, and muxes read data.

dma_if_pcie_us module

PCIe DMA interface module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Uses a double width segmented memory interface. Wrapper for dma_if_pcie_us_rd and dma_if_pcie_us_wr.

dma_if_pcie_us_rd module

PCIe DMA interface module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Uses a double width segmented memory interface.

dma_if_pcie_us_wr module

PCIe DMA interface module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Uses a double width segmented memory interface.

dma_psdpram module

DMA RAM module. Segmented simple dual port RAM to connect a DMA interface module to a DMA client.

pcie_axi_dma_desc_mux module

Descriptor multiplexer/demultiplexer for PCIe AXI DMA module. Enables sharing the PCIe AXI DMA module between multiple request sources, interleaving requests and distributing responses.

pcie_tag_manager module

PCIe in-flight tag manager.

pcie_us_axi_dma module

PCIe AXI DMA module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Parametrizable AXI burst length. Wrapper for pcie_us_axi_dma_rd and pcie_us_axi_dma_wr.

pcie_us_axi_dma_rd module

PCIe AXI DMA module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Parametrizable AXI burst length.

pcie_us_axi_dma_wr module

PCIe AXI DMA module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Parametrizable AXI burst length.

pcie_us_axi_master module

PCIe AXI master module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Parametrizable AXI burst length. Wrapper for pcie_us_axi_master_rd and pcie_us_axi_master_wr.

pcie_us_axi_master_rd module

PCIe AXI master module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Parametrizable AXI burst length.

pcie_us_axi_master_wr module

PCIe AXI master module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit datapaths. Parametrizable AXI burst length.

pcie_us_axil_master module

PCIe AXI lite master module for Xilinx Ultrascale series FPGAs. Supports 64, 128, 256, and 512 bit PCIe interfaces.

pcie_us_axis_cq_demux module

Demux module for Xilinx Ultrascale CQ interface. Can be used to route incoming requests based on function, BAR, and other fields. Supports 64, 128, 256, and 512 bit datapaths.

pcie_us_axis_rc_demux module

Demux module for Xilinx Ultrascale RC interface. Can be used to route incoming completions based on the requester ID (function). Supports 64, 128, 256, and 512 bit datapaths.

pcie_us_cfg module

Configuration shim for Xilinx Ultrascale series FPGAs.

pcie_us_msi module

MSI shim for Xilinx Ultrascale series FPGAs.

priority_encoder module

Parametrizable priority encoder.

pulse_merge module

Parametrizable pulse merge module. Combines several single-cycle pulse status signals together.

Common signals

Common parameters

Source Files

arbiter.v                : Parametrizable arbiter
axis_arb_mux.v           : Parametrizable AXI stream mux
dma_client_axis_sink.v   : AXI stream sink DMA client
dma_client_axis_source.v : AXI stream source DMA client
dma_if_mux.v             : DMA interface mux
dma_if_mux_rd.v          : DMA interface mux (read)
dma_if_mux_wr.v          : DMA interface mux (write)
dma_if_pcie_us.v         ; DMA interface for Xilinx Ultrascale PCIe
dma_if_pcie_us_rd.v      ; DMA interface for Xilinx Ultrascale PCIe (read)
dma_if_pcie_us_wr.v      ; DMA interface for Xilinx Ultrascale PCIe (write)
dma_psdpram.v            : DMA RAM (segmented simple dual port RAM)
pcie_axi_dma_desc_mux.v  : Descriptor mux for DMA engine
pcie_tag_manager.v       : PCIe in-flight tag manager
pcie_us_axi_dma.v        : PCIe AXI DMA module (Xilinx Ultrascale)
pcie_us_axi_dma_rd.v     : PCIe AXI DMA read module (Xilinx Ultrascale)
pcie_us_axi_dma_wr.v     : PCIe AXI DMA write module (Xilinx Ultrascale)
pcie_us_axi_master.v     : PCIe AXI Master module (Xilinx Ultrascale)
pcie_us_axi_master_rd.v  : PCIe AXI Master read module (Xilinx Ultrascale)
pcie_us_axi_master_wr.v  : PCIe AXI Master write module (Xilinx Ultrascale)
pcie_us_axil_master.v    : PCIe AXI Lite Master module (Xilinx Ultrascale)
pcie_us_axis_cq_demux.v  : Parametrizable AXI stream CQ demux
pcie_us_axis_rc_demux.v  : Parametrizable AXI stream RC demux
pcie_us_cfg.v            : Configuration shim for Xilinx Ultrascale devices
pcie_us_msi.v            : MSI shim for Xilinx Ultrascale devices
priority_encoder.v       : Parametrizable priority encoder
pulse_merge              : Parametrizable pulse merge module

Testing

Running the included testbenches requires cocotb, cocotbext-axi, cocotbext-pcie, and Icarus Verilog. The testbenches can be run with pytest directly (requires cocotb-test), pytest via tox, or via cocotb makefiles.

About

Verilog PCI express components

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Verilog 53.3%
  • Python 39.5%
  • Makefile 6.3%
  • Other 0.9%