Skip to content

uclibs/curate_archive

 
 

Repository files navigation

Curate Version Build Status Coverage Status

Curate is a Rails engine leveraging ProjectHydra and ProjectBlacklight components to deliver a foundation for an Institutional Repositories. It is released under the Apache 2 License

Starting a New Curate Based Application

When you generate your new Rails application, you can use Curate's application template:

$ rails new my_curate_application -m https://raw.github.com/projecthydra-labs/curate/develop/lib/generators/curate/application_template.rb

Or Install By Hand

Add the following line to your application's Gemfile:

gem 'curate'

And then execute:

$ bundle
$ rails generate curate

Developing and Contributing for the Curate gem

Prerequisites

You may need to have the following installed ‡

‡ - Why "you may need"? Some of these are only optionally used in development and tests; But production will need it.

Clone the Curate repository

From the command line:

git clone https://github.com/projecthydra/curate.git ./path/to/local

Jetty

Curate uses Jetty for development and testing. You could configure it to use an alternate Fedora and SOLR location, but that is an exercise for the reader. The hydra-jetty package should not be use for secure production installations

Install Jetty

Install jetty, you should only need to do this once (unless you remove the ./jetty directory)

$ rake jetty:unzip

Running the Specs

Inside the Curate directory (i.e. ./path/to/local):

All of Them

  1. Make sure jetty is running (rake jetty:start); It will take a bit to spin up jetty.
  2. Make sure you have a dummy app ‡
  3. Run rake regenerate to build a clean app in ./spec/dummy
  4. Then run rake spec; The tests will take quite a while ‡‡

‡ - A Rails engine requires a Rails application to run. The dummy app is a generated application inside Curate in the ./spec/internal directory ‡‡ - Slow tests are a big problem and we are working on speeding them up, but its complicated.

Some of Them

In some cases you want to know the results of a single test. Here's how you do it.

  1. Make sure jetty is running (rake jetty:start); It will take a bit to spin up jetty.
  2. Make sure you have a dummy app ‡
  3. Run rake regenerate to build a clean app in ./spec/dummy
  4. Then run BUNDLE_GEMFILE=spec/internal/Gemfile bundle exec rspec path/to/spec.rb:LINE

‡ - With Curate being an Engine we need to point to the Dummy Application's Gemfile. In full Rails applications you can normally run the following rspec path/to/spec.rb:LINE

With Zeus

Zeus pre-loads your Rails app so that your normal development tasks such as console, server, generate, and specs/tests take less than one second. ‡

  1. In terminal window #1 run zeus start
  2. In terminal window #2, once Zeus is started: run zeus rake spec for all tests; or zeus test path/to/spec.rb:LINE for one

‡ - Loading the environment to run your tests takes less than a second. So running an individual test will take less time.

Contributing Back

If you are interested in helping us make Curate better, please take a look at our Contributing resources and guidelines.

Working on Curate while working on my Application

Assuming you are wanting to work on your Curate-based application and make modifications to the Curate gem, follow these instructions.

Replace the following line in the Gemfile of your Curate-based application (see Starting a New Curate Based Application):

gem 'curate' ...

with

gem 'curate', path: './path/to/my/clone/of/curate'

More information about Gemfile management at Bundler.io

You can then do concurrent development on both your clone of the Curate gem and your Curate-based application.

NOTE: Any changes you make in the Curate gem will likely require you to restart your web-server.

Integration with CAS, LDAP, Shibboleth

For integration with CAS, refer: https://github.com/nbudin/devise_cas_authenticatable

For integration with LDAP, refer: https://github.com/cschiewek/devise_ldap_authenticatable

For integration with Shibboleth, refer: https://github.com/jgeorge300/devise_shibboleth_authenticatable

For integration with multiple authentication systems (and for twitter, facebook, etc.), consider using OmniAuth: https://github.com/intridea/omniauth

Standing up your Curate-based Rails application in Production

We are working on this and have more to come.

Project Hydra

This software has been developed by and is brought to you by the Hydra community. Learn more at the Project Hydra website

Project Hydra Logo

About

A data curation Ruby on Rails engine built on Hydra and Sufia

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Ruby 71.8%
  • HTML 22.1%
  • CSS 3.3%
  • CoffeeScript 1.7%
  • JavaScript 1.1%