Pulled Pork for Snort rule management (from Google code)
Find us on Freenode (IRC) #pulledpork
Copyright (C) 2009-2015 JJ Cummings and the PulledPork Team!
Thank you for choosing to use PulledPork! This file provides some basic guidance on the usage of PulledPork. Please be sure to read this file thoroughly so that you don't overlook something!
-= Features and Capabilities =-
- Automated downloading, parsing, state modification and rule modification for all of your snort rulesets.
- Checksum verification for all major rule downloads
- Automatic generation of updated sid-msg.map file
- Capability to include your local.rules in sid-msg.map file
- Capability to pull rules tarballs from custom urls
- Complete Shared Object support
- Complete IP Reputation List support
- Capability to download multiple disparate rulesets at once
- Maintains accurate changelog
- Capability to HUP processes after rules download and process
- Aids in tuning of rulesets
- Verbose output so that you know EXACTLY what is happening
- Minimal Perl Module dependencies
- A sweet smokey flavor throughout the pork!
-= Command Usage Reference =-
Usage: ./pulledpork.pl [-dEgHklnRTPVvv? -help] -c -o -O -s <so_rule output directory> -D -S -p -C -t -h -I (security|connectivity|balanced) -i -b -e -M -r -K
Options:
-help/? Print this help info.
-b Where the dropsid config file lives.
-C Path to your snort.conf
-c Where the pulledpork config file lives.
-d Do not verify signature of rules tarball, i.e. downloading fron non VRT or ET locations.
-D What Distro are you running on, for the so_rules For latest supported options see http://www.snort.org/snort-rules/shared-object-rules Valid Distro Types: Debian-5-0, Debian-6-0, Ubuntu-8.04, Ubuntu-10-4 Centos-4-8, Centos-5-4, FC-12, FC-14, RHEL-5-5, RHEL-6-0 FreeBSD-7-3, FreeBSD-8-1 OpenBSD-4-8 Slackware-13-1
-e Where the enablesid config file lives.
-E Write ONLY the enabled rules to the output files.
-g grabonly (download tarball rule file(s) and do NOT process)
-h path to the sid_changelog if you want to keep one?
-H Send a SIGHUP to the pids listed in the config file
-I Specify a base ruleset( -I security,connectivity,or balanced, see README.RULESET)
-i Where the disablesid config file lives.
-k Keep the rules in separate files (using same file names as found when reading)
-K Where (what directory) do you want me to put the separate rules files?
-l Log Important Info to Syslog (Errors, Successful run etc, all items logged as WARN or higher)
-L Where do you want me to read your local.rules for inclusion in sid-msg.map
-m where do you want me to put the sid-msg.map file?
-M where the modifysid config file lives.
-n Do everything other than download of new files (disablesid, etc)
-o Where do you want me to put generic rules file?
-p Path to your Snort binary
-P Process rules even if no new rules were downloaded
-R When processing enablesid, return the rules to their ORIGINAL state
-r Where do you want me to put the reference docs (xxxx.txt)
-S What version of snort are you using
-s Where do you want me to put the so_rules?
-T Process text based rules files only, i.e. DO NOT process so_rules
-u Where do you want me to pull the rules tarball from ** E.g., ET, Snort.org. See pulledpork config rule_url option for value ideas
-V Print Version and exit
-v Verbose mode, you know.. for troubleshooting and such nonsense.
-vv EXTRA Verbose mode, you know.. for in-depth troubleshooting and other such nonsense.
-=Basic Usage Examples=-
A simple example of how to use PulledPork would be to specify all of your configuration directives inside of the PulledPork.conf file. Specifically for minimal function, i.e. NO Shared Object rule processing you must define at a minimum the rule_file, oinkcode, temp_path, tar_path, and rule_path values. Below are some examples of this.
./pulledpork.pl -o /usr/local/etc/snort/rules/ -O 12345667778523452344234234
-u http://www.snort.org/reg-rules/snortrules-snapshot-2972.tar.gz -i disablesid.conf -T -H
The above will fetch the snortrules-snapshot-2972.tar.gz tarball from snort.org using the specified oinkcode of 12345667778523452344234234 and put the rules files from that tarball into the output path of /usr/local/etc/snort/rules/ while the -i option tells pulledpork where the disablesid.conf lives, and the -T option tells pulledpork to not process for any shared object rules and the final -H option tells pulledpork to send a Hangup signal to the snort pid that you defined in the pulledpork.conf.
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -T -H
Similar to the first example but all options specified in the pulledpork.conf file (other than disablesid and -H)...
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -m /usr/local/etc/snort/sid-msg.map -Hn
The above will simply read the disablesid and disable as defined, then send a Hangup signal after generating the sid-msg.map at the specified location without downloading anything. Highly useful when tuning / making changes etc..
Next example, snort inline with rules that we want to drop and disable, then HUP our daemons after creating a sid-msg.map and writing change info to sid_changes.log!
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -b dropsid.conf -m /usr/local/etc/snort/sid-msg.map
-h /var/log/sid_changes.log -H
Next example, same as the previous but specifying that we want to run the default "security" based ruleset and that we want to enable rules specified in enablesid.conf.
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -b dropsid.conf -e enablesid.conf -m /usr/local/etc/snort/sid-msg.map
-h /var/log/sid_changes.log -I security -H
Next example, same as the previous but specifying that we want to -K (Keep) the originationg tarball names. and write them to /usr/local/etc/snort/rules/
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -b dropsid.conf -e enablesid.conf -m /usr/local/etc/snort/sid-msg.map
-h /var/log/sid_changes.log -I security -H -K /usr/local/etc/snort/rules/
** Special Notes Section**
Please note that pulledpork runs rule modification (enable, drop, disable, modify) in that order by default..
1: enable
2: drop
3: disable
This means that disable rules will always take precedence.. thusly if you specify the same gid:sid in enable and disable configuration files, then that sid will be disabled.. keep this in mind for ranges also! However, you can specify a different order using the state_order keyword in the master config file.
I'll probably add more info later, the --help or --? will display all runtime options and the pulledpork.conf is pretty well annotated... so if you can't figure it out... try harder! And once you figure it out, please feel free to contribute with additional readme / help foo.. thx!
As a side note, I would like to give a shout-out to my buddy Bruce for aiding in the naming of PulledPork! "hopefully that will shut him up ;-)"
J