[2.2] Various backports for the 2.2 release #149
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Starting approximately from version 1302506 vn_lock_pair() grown two additional arguments following head. There is a one week hole, but that is closet reference point we have. Reviewed-by: Mateusz Guzik <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15047
Reviewed-by: Alexander Motin <[email protected]> Signed-off-by: Mateusz Guzik <[email protected]> Closes openzfs#15036
It seems 9c5167d "Project Quota on ZFS" missed to add prefetch for DMU_PROJECTUSED_OBJECT during scan (scrub/resilver). It should not cause visible problems, but may affect scub/resilver performance. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15024
Since we are already iterating the ZAP, we have exact string key to remove, we do not need to call zap_remove_int() with the int key we just converted, we can call zap_remove() for the original string. This should make no functional change, only a micro-optimization. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15056 (cherry picked from commit fdba8cb)
Unlike regular receive, raw receive require destination to have the same block structure as the source. In case of dnode reclaim this triggers two special cases, requiring special handling: - If dn_nlevels == 1, we can change the ibs, but dnode_set_blksz() should not dirty the data buffer if block size does not change, or durign receive dbuf_dirty_lightweight() will trigger assertion. - If dn_nlevels > 1, we just can't change the ibs, dnode_set_blksz() would fail and receive_object would trigger assertion, so we should destroy and recreate the dnode from scratch. Reviewed-by: Paul Dagnelie <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15039 (cherry picked from commit c4e8742)
My analysis in PR openzfs#14716 was incorrect. Each histogram bucket contains the number of incorrect bits, by position in a 64-bit word, over the entire record. 8-bit buckets can overflow for record sizes above 2k. To forestall that, saturate each bucket at 255. That should still get the point across: either all bits are equally wrong, or just a couple are. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alan Somers <[email protected]> Sponsored-by: Axcient Closes openzfs#15049
As it turns out having autotrim default to 'on' on FreeBSD never really worked due to mess with defines where userland and kernel module were getting different default values (userland was defaulting to 'off', module was thinking it's 'on'). Reviewed-by: Tino Reichardt <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Signed-off-by: Yuri Pankov <[email protected]> Closes openzfs#15079
Make the version here match that elsewhere in the kernel and system headers. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Signed-off-by: Coleman Kane <[email protected]> Closes openzfs#15058 Signed-off-by: Brian Behlendorf <[email protected]>
This change was introduced in Linux commit 7ba150834b840f6f5cdd07ca69a4ccf39df59a66 Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Signed-off-by: Coleman Kane <[email protected]> Closes openzfs#15059
The disk_check_media_change() function was added which replaces bdev_check_media_change. This change was introduced in 6.5rc1 444aa2c58cb3b6cfe3b7cc7db6c294d73393a894 and the new function takes a gendisk* as its argument, no longer a block_device*. Thus, bdev->bd_disk is now used to pass the expected data. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Coleman Kane <[email protected]> Closes openzfs#15060
Set ARC_FLAG_NO_BUF when prefetching data L1 buffers for scan. We do not prefetch data L0 buffers, so we do not need the L1 buffers, only want them to be ready in ARC. This saves some CPU time on the buffers decompression. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15029
On my machines I observe random failures caused by rollback happening after zfs root is mounted. I've observed two types of failures: - zfs-rollback-bootfs.service fails saying that rollback must be done just before mounting the dataset - boot process fails and rescue console is entered. After making this modification and testing it for couple of days none of those problems have been observed anymore. I don't know if `dracut-mount.service` is still needed in the `After` directive. Maybe someone else is able to address this? Reviewed-by: Gregory Bartholomew <[email protected]> Signed-off-by: Wojciech Małota-Wójcik <[email protected]> Closes openzfs#15025
Ashift can be set for a vdev only during its creation, and the top-level vdev does not change when a vdev is attached or replaced. The ashift property should not be used during attachment, as it does not allow attaching/replacing a vdev if the pool's ashift property is increased after the existing vdev was created. Instead, we should be able to attach the vdev if the attached vdev can satisfy the ashift requirement with its parent. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Signed-off-by: Ameer Hamza <[email protected]> Closes openzfs#15061
Check that vdev has valid zap and bail out early. While here, move objid selection out of the loop, it's not going to change. Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Yuri Pankov <[email protected]> Closes openzfs#15063
Since spa_min_alloc may not be a power of 2, unlike ashifts, in the case of DRAID, we should not select the minimal value among several vdevs. Rounding to a multiple of it is unlikely to work for other vdevs. Instead, using the greatest common divisor produces smaller yet more reasonable results. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Signed-off-by: Ameer Hamza <[email protected]> Closes openzfs#15067
We cannot call zpl_enter in zpl_test_super, because zpl_test_super is under spinlock so we can't sleep, and also because zpl_test_super is called without sb->s_umount taken, so it's possible we would race with zfs_umount and call zpl_enter on freed zfsvfs. Here's an stack trace when this happens: [ 2379.114837] VERIFY(cvp->cv_magic == CV_MAGIC) failed [ 2379.114845] PANIC at spl-condvar.c:497:__cv_broadcast() [ 2379.114854] Kernel panic - not syncing: VERIFY(cvp->cv_magic == CV_MAGIC) failed [ 2379.115012] Call Trace: [ 2379.115019] dump_stack+0x74/0x96 [ 2379.115024] panic+0x114/0x2f6 [ 2379.115035] spl_panic+0xcf/0xfc [spl] [ 2379.115477] __cv_broadcast+0x68/0xa0 [spl] [ 2379.115585] rrw_exit+0xb8/0x310 [zfs] [ 2379.115696] rrm_exit+0x4a/0x80 [zfs] [ 2379.115808] zpl_test_super+0xa9/0xd0 [zfs] [ 2379.115920] sget+0xd1/0x230 [ 2379.116033] zpl_mount+0xdc/0x230 [zfs] [ 2379.116037] legacy_get_tree+0x28/0x50 [ 2379.116039] vfs_get_tree+0x27/0xc0 [ 2379.116045] path_mount+0x2fe/0xa70 [ 2379.116048] do_mount+0x80/0xa0 [ 2379.116050] __x64_sys_mount+0x8b/0xe0 [ 2379.116052] do_syscall_64+0x35/0x50 [ 2379.116054] entry_SYSCALL_64_after_hwframe+0x61/0xc6 [ 2379.116057] RIP: 0033:0x7f9912e8b26a Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes openzfs#15077
We would see zed assert on one of our systems if we powered off a slot. Further examination showed zfs_retire_recv() was reporting a GUID of 0, which in turn would return a NULL nvlist. Add in a check for a zero GUID. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes openzfs#15084
The checksum histograms were intended to be used with ATA and parallel SCSI, which are obsolete. With modern storage hardware, they will almost always look like white noise; all bits will be wrong. They only serve to bloat the event. That's a particular problem on FreeBSD, where events must fit into a 1016 byte buffer. This fixes issue openzfs#14717 for RAIDZ pools, but not for mirror pools. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Rich Ercolani <[email protected]> Signed-off-by: Alan Somers <[email protected]> Sponsored-by: Axcient Closes openzfs#15052
With anything but fletcher-4, even a tiny change in the input will cause the checksum value to change completely. So knowing the actual and expected checksums doesn't provide much more information than "they don't match". The harm in sending them is simply that they bloat the event. In particular, on FreeBSD the event must fit into a 1016 byte buffer. Fixes openzfs#14717 for mirrored pools. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Rich Ercolani <[email protected]> Signed-off-by: Alan Somers <[email protected]> Sponsored-by: Axcient Closes openzfs#14717 Closes openzfs#15052
To simplify error handling bpobj_iterate_blkptrs() iterates through the list of block pointers backwards. Unfortunately speculative prefetcher is currently unable to detect such patterns, that makes each block read there synchronous and very slow on HDD pools. According to my tests, added explicit prefetch reduces time needed to asynchronously delete 8 snapshots of 4 million blocks each from 20 seconds to less than one, that should free sync thread for other useful work, such as async writes, scrub, etc. While there, plug one memory leak in case of bpobj_open() error and harmonize some variable names. Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15071
- Reduce maximum prefetch distance for 32bit platforms to 8MB as it was previously. Those systems didn't grow much probably, so better stay conservative there. - Retire array_rd_sz tunable, blocking prefetch for large requests. We should not penalize applications trying to be more efficient. The speculative prefetcher by itself has reasonable distance limits, and 1MB is not much at all these days. Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes openzfs#15072
metaslab_force_ganging isn't enough to actually force ganging, because it still only forces 3% of the time. This adds metaslab_force_ganging_pct so we can configure how often to force ganging. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Rob Norris <[email protected]> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Closes openzfs#15088
This new check in 0.9.0 appears to have some issues with various forms of "early return", like trap, exit and return. This is tripping up (at least): cmd/zed/zed.d/history_event-zfs-list-cacher.sh /etc/zfs/zfs-functions Its not obvious what its complaining about or what the remedy is, so it seems sensible to disable this check for now. See also: https://www.shellcheck.net/wiki/SC2317 koalaman/shellcheck#2542 koalaman/shellcheck#2613 Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Rob Norris <[email protected]> Closes openzfs#15089
Signed-off-by: Brian Behlendorf <[email protected]>
usaleem-ix
approved these changes
Jul 25, 2023
amotin
approved these changes
Jul 25, 2023
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Motivation and Context
Various bug fixes which should be included in the final 2.2 release.
Upstream PR: openzfs#15091
How Has This Been Tested?
CI Testing and Scale Image sanity testing: https://ci.tn.ixsystems.net/jenkins/job/TrueNAS%20SCALE%20-%20Unstable/job/Build%20-%20TrueNAS%20SCALE_Custom/513/
Types of changes
Checklist:
Signed-off-by.