Staging linuxboot#1381

Moved boards to 5.10.5
kernel configs to not cause regression on crypto backend, both with cryptsetup and current gpg toolstack
modules/linux added 5.10.178 but nothing migrated at this stage.
modules/linux includes Android tethering modules to be packed when needed per board configs (maximized only)
Kernel configs for x230 good to go.

u-root module containing bases for using exp/tcz and wget (with only root ca module included)
qemu kernel config includes changes needed to support CGROUPS and
busybox upgraded and config changed to include adduser/addgroup/delgoup/deluser per determist/systems requirements, but still failing
Makefile: adds packing of u-root under initrd if requested

kexec patch still carries old multiboot patch. Not sure wasa good idea to remove since user could decide to use old default multiboot1 (default is now multiboot2 under kexec 2.0.26 under master)
CircleCI changes revisioning to 4.19 (textual, not changing any behavior)

.circleci/config.yml

@@ -209,7 +209,7 @@ workflows:
 # version. The last board in the sequence is the dependency
 # for the parallel boards built at the end, and also save_cache.
 
-      # Coreboot 4.13
+      # Coreboot 4.19
       - build_and_persist:
           name: x230-hotp-maximized
           target: x230-hotp-maximized

Makefile

@@ -529,6 +529,7 @@ initrd-y += $(pwd)/blobs/dev.cpio
 initrd-y += $(build)/$(initrd_dir)/modules.cpio
 initrd-y += $(build)/$(initrd_dir)/tools.cpio
 initrd-$(CONFIG_HEADS) += $(build)/$(initrd_dir)/heads.cpio
+initrd-$(CONFIG_UROOT) += $(build)/$(initrd_dir)/u-root.cpio
 
 #$(build)/$(initrd_dir)/.build: $(build)/$(initrd_dir)/initrd.cpio.xz
 

boards/p8z77-m_pro-tpm1-maximized/p8z77-m_pro-tpm1-maximized.config

@@ -39,7 +39,7 @@ CONFIG_LINUX_CONFIG=config/linux-x230-maximized.config
 CONFIG_COREBOOT_CONFIG=config/coreboot-p8z77-m_pro-tpm1.config
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.17
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_CRYPTSETUP2=y

boards/qemu-coreboot-fbwhiptail-tpm1-hotp/qemu-coreboot-fbwhiptail-tpm1-hotp.config

@@ -5,7 +5,7 @@
 # Nitrokey Pro can also be used by forwarding the USB device from the host to
 # the VM.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-fbwhiptail-tpm1/qemu-coreboot-fbwhiptail-tpm1.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 1.2).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-fbwhiptail-tpm2-hotp/qemu-coreboot-fbwhiptail-tpm2-hotp.config

@@ -4,7 +4,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-fbwhiptail-tpm2/qemu-coreboot-fbwhiptail-tpm2.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-fbwhiptail/qemu-coreboot-fbwhiptail.config

@@ -3,7 +3,7 @@
 #
 # Note that the TPM does not work.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-qemu-fbwhiptail.config

boards/qemu-coreboot-whiptail-tpm1-hotp/qemu-coreboot-whiptail-tpm1-hotp.config

@@ -5,7 +5,7 @@
 # Nitrokey Pro can also be used by forwarding the USB device from the host to
 # the VM.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-whiptail-tpm1/qemu-coreboot-whiptail-tpm1.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 1.2).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-whiptail-tpm2-hotp/qemu-coreboot-whiptail-tpm2-hotp.config

@@ -4,7 +4,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot-whiptail-tpm2/qemu-coreboot-whiptail-tpm2.config

@@ -3,7 +3,7 @@
 #
 # TPM can be used with a qemu software TPM (TIS, 2.0).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 #Enable DEBUG output

boards/qemu-coreboot/qemu-coreboot.config

@@ -4,7 +4,7 @@
 # Note that the TPM does not work, so this
 # will just drop into the recovery shell.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-qemu.config

boards/t420-hotp-maximized/t420-hotp-maximized.config

@@ -9,7 +9,7 @@
 # - dropbear
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t420-maximized.config

boards/t420-maximized/t420-maximized.config

@@ -8,7 +8,7 @@
 # Doesn't include (to fit in 7mb image)
 # - dropbear
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t420-maximized.config

boards/t420/t420.config

@@ -1,6 +1,6 @@
 # Configuration for a t420 running Qubes 4.1 and other OS, X220 is identical to X230 on the Linux Side of things.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t420.config

boards/t430-hotp-legacy/t430-hotp-legacy.config

@@ -8,7 +8,7 @@
 # Addition vs standard x230 board config:
 # HOTP_KEY: HOTP challenge for currently supported USB Security dongles
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-legacy.config

boards/t430-hotp-maximized/t430-hotp-maximized.config

@@ -7,7 +7,7 @@
 #
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-maximized.config

boards/t430-legacy-flash/t430-legacy-flash.config

@@ -1,7 +1,7 @@
 # Minimal configuration for a t430 to support flashrom and USB
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_BASH=n

boards/t430-legacy/t430-legacy.config

@@ -5,7 +5,7 @@
 # dropbear support(ssh client/server)
 # e1000e (ethernet driver)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-legacy.config

boards/t430-maximized/t430-maximized.config

@@ -7,7 +7,7 @@
 #
 # - DOES NOT INCLUDE Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t430-maximized.config

boards/t520-hotp-maximized/t520-hotp-maximized.config

@@ -5,7 +5,7 @@
 # - Forged 00:DE:AD:C0:FF:EE MAC address  (if not extracting gbe.bin from backup with blobs/xx20/extract.sh)
 #   - Note that this MAC address can be modified under build/coreboot-VER/util/bincfg/gbe-82579LM.set
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t520-maximized.config

boards/t520-maximized/t520-maximized.config

@@ -5,7 +5,7 @@
 # - Forged 00:DE:AD:C0:FF:EE MAC address  (if not extracting gbe.bin from backup with blobs/xx20/extract.sh)
 #   - Note that this MAC address can be modified under build/coreboot-VER/util/bincfg/gbe-82579LM.set
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t520-maximized.config

boards/t530-dgpu-hotp-maximized/t530-dgpu-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 with a dGPU. Initialization of the dGPU is necessary in order to use an external monitor via the DisplayPort (either the in-built mini-DisplayPort or the DisplayPort in the dock). In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-dgpu-maximized.config

boards/t530-dgpu-maximized/t530-dgpu-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 with a dGPU. Initialization of the dGPU is necessary in order to use an external monitor via the DisplayPort (either the in-built mini-DisplayPort or the DisplayPort in the dock). In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-dgpu-maximized.config

boards/t530-hotp-maximized/t530-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 without a dGPU. It will work just fine for a board with a dGPU, except you will not be able to use an external monitor via the mini-displayport or the dock's displayport, though external monitors will work via VGA ports. To initialize the dGPU please use one of the dgpu boards.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-maximized.config

boards/t530-maximized/t530-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a t530 without a dGPU. It will work just fine for a board with a dGPU, except you will not be able to use an external monitor via the mini-displayport or the dock's displayport, though external monitors will work via VGA ports. To initialize the dGPU please use one of the dgpu boards.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-t530-maximized.config

boards/w530-dgpu-K1000m-hotp-maximized/w530-dgpu-K1000m-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K1000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K1000m-maximized.config

boards/w530-dgpu-K1000m-maximized/w530-dgpu-K1000m-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K1000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K1000m-maximized.config

boards/w530-dgpu-K2000m-hotp-maximized/w530-dgpu-K2000m-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K2000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K2000m-maximized.config

boards/w530-dgpu-K2000m-maximized/w530-dgpu-K2000m-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board is designed for a w530 with the K2000M Nvidia Quadro dGPU. Initialization of the dGPU is necessary in order to use an external monitor whether through the in-build VGA or mini-DisplayPort or via the dock. In order to build this the relevant script in the blobs directory must be run (or self-pulled roms placed in that directory) and after building the rom, the nvramtool must be run on the 12MB rom to change the default graphics mode away from integrated-only graphics (see README_vbios in the blobs directory).
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-dgpu-K2000m-maximized.config

boards/w530-hotp-maximized/w530-hotp-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board ignores the in-built dGPU that comes with all w530's. In doing so the dGPU will not be initialized. This has some benefits in terms of reduced complexity in working with OS's with poor support for NVIDIA, better battery life and lower heat (making use of the thicker heatsink from a dGPU). Conversely, if you do not initialize the dGPU you will be unable to use an external monitor. To initialize the dGPU please use the dGPU boards that corresponds with the model of dGPU included with your device.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-maximized.config

boards/w530-maximized/w530-maximized.config

@@ -8,7 +8,7 @@
 # - Includes Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # This board ignores the in-built dGPU that comes with all w530's. In doing so the dGPU will not be initialized. This has some benefits in terms of reduced complexity in working with OS's with poor support for NVIDIA, better battery life and lower heat (making use of the thicker heatsink from a dGPU). Conversely, if you do not initialize the dGPU you will be unable to use an external monitor. To initialize the dGPU please use the dGPU boards that corresponds with the model of dGPU included with your device.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-w530-maximized.config

boards/x220-hotp-maximized/x220-hotp-maximized.config

@@ -9,7 +9,7 @@
 # - dropbear
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x220-maximized.config

boards/x220-maximized/x220-maximized.config

@@ -9,7 +9,7 @@
 # - dropbear
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x220-maximized.config

boards/x220/x220.config

@@ -1,6 +1,6 @@
 # Configuration for a x220 running Qubes 4.1 and other OS, X220 is identical to X230 on the Linux Side of things.
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x220.config

boards/x230-hotp-legacy/x230-hotp-legacy.config

@@ -8,7 +8,7 @@
 # Addition vs standard x230 board config:
 # HOTP_KEY: HOTP challenge for currently supported USB Security dongles
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-legacy.config

boards/x230-hotp-maximized-fhd_edp/x230-hotp-maximized-fhd_edp.config

@@ -19,7 +19,7 @@
 #
 # - Includes: Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized-fhd_edp.config

boards/x230-hotp-maximized/x230-hotp-maximized.config

@@ -7,7 +7,7 @@
 #
 # - Includes: Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized.config

boards/x230-hotp-maximized_usb-kb/x230-hotp-maximized_usb-kb.config

@@ -9,7 +9,7 @@
 # 	Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 # 	USB Keyboard support
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized.config

boards/x230-legacy-flash/x230-legacy-flash.config

@@ -1,7 +1,7 @@
 # Minimal configuration for a x230 to support flashrom and USB
 
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_BASH=n

boards/x230-legacy/x230-legacy.config

@@ -4,7 +4,7 @@
 # dropbear support(ssh client/server)
 # e1000e (ethernet driver)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-legacy.config

boards/x230-maximized-fhd_edp/x230-maximized-fhd_edp.config

@@ -19,7 +19,7 @@
 #
 # - DOES NOT INCLUDE Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized-fhd_edp.config

boards/x230-maximized/x230-maximized.config

@@ -7,7 +7,7 @@
 #
 # - DOES NOT INCLUDE Nitrokey/Librem Key HOTP Security dongle remote attestation (in addition to TOTP remote attestation through Qr Code)
 export CONFIG_COREBOOT=y
-export CONFIG_COREBOOT_VERSION=4.13
+export CONFIG_COREBOOT_VERSION=4.19
 export CONFIG_LINUX_VERSION=5.10.5
 
 CONFIG_COREBOOT_CONFIG=config/coreboot-x230-maximized.config