Create AS7263_Sparkfun.ino

LightSensors/AS7263_Sparkfun/AS7263_Sparkfun.ino

@@ -0,0 +1,92 @@
+/*
+  AS7263 color sensor
+
+  Reads light readings and temperature readings from AMS AS7263 sensor.
+  Uses Sparkfun's AS726x library. Works with both Sparkfun and Adafruit 
+  breakout boards.
+
+  Datasheet: https://ams.com/documents/20143/36005/AS7263_DS000476_1-00.pdf/4bd22964-7fe0-2053-3e97-906f0836182f
+   
+   Near IR wavelengths:
+   610nm: R
+   680nm: S
+   730nm: T
+   760nm: U
+   810nm: V
+   860nm: W
+
+   According to the datasheet, all channels tested under 5700K White LED light.
+
+   based on Sparkfun libraries
+   modified 16 Feb 2020
+   by Tom Igoe
+*/
+
+#include <AS726X.h>
+
+// make an instance of the color sensor library:
+AS726X colorSensor;
+
+void setup() {
+  // initialize serial and I2C communication:
+  Serial.begin(9600);
+  Wire.begin();
+
+  // initialize sensor:
+  colorSensor.begin();
+
+  // optional sensor settings:
+  //Set the measurement mode
+  // 0: Continuous reading of STUV
+  // 1: Continuous reading of RTUX
+  // 2: Continuous reading of all channels (default)
+  // 3: One-shot reading of all channels
+  colorSensor.setMeasurementMode(2);
+
+  // Integration time = time to get good readings.
+  // number is in units of  2.8ms.
+  // for measurement mode 2 or 3, you need 280ms, or integrationTime(100)
+  // default is 50:
+  colorSensor.setIntegrationTime(100);
+
+  // gain sets sensitivity:
+  // 0: 1x (default)
+  // 1: 3.7x
+  // 2: 16x
+  // 3: 64x
+  colorSensor.setGain(3);
+}
+
+void loop() {
+  // read sensor:
+  colorSensor.takeMeasurements();
+
+  // get results:
+  // for uncalibrated readings use .getR(), .getS(), etc.
+  // uncalibrated readings are ints, not floats.
+  float cR = colorSensor.getCalibratedR();
+  float cS = colorSensor.getCalibratedS();
+  float cT = colorSensor.getCalibratedT();
+  float cU = colorSensor.getCalibratedU();
+  float cV = colorSensor.getCalibratedV();
+  float cW = colorSensor.getCalibratedW();
+  String readings = "IR-R: ";
+  readings += String(cR);
+  readings += ", IR-S:";
+  readings += String(cS);
+  readings += ", IR-T:";
+  readings += String(cT);
+  readings += ", IR-U: ";
+  readings += String(cU);
+  readings += ", IR-V:";
+  readings += String(cV);
+  readings += ", IR-W:";
+  readings += String(cW);
+
+  // get temperature in degrees C (for degrees F, use float .getTemperatureF())
+  readings += ", temp.: ";
+  readings += String(colorSensor.getTemperature());
+
+  // print results:
+  Serial.println(readings);
+}