ESP-AWS-IoT

This framework enables AWS IoT cloud connectivity with ESP32 based platforms using AWS IoT Device Embedded SDK.

Getting Started

• Please clone this repository using,

  git clone --recursive https://github.com/espressif/esp-aws-iot
  

• Please refer to https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html for setting ESP-IDF
  • ESP-IDF can be downloaded from https://github.com/espressif/esp-idf/
  • ESP-IDF v3.1 and above is recommended version
• Please refer to example README for more information on setting up examples

Using an ATECC608A with the ESP-AWS-IoT

The esp-aws-iot contains the support for using a secure element chip from microchip i.e. ATECC608A. This will store the private key used for the TLS communication in the secure element which has the hardware security. The module ESP32-WROOM-32SE which integrates the ATECC608A, can be readily used for this purpose. To use the secure element for the TLS, configure the project with help of the following steps.

To use the secure element(ATECC608A) for the TLS connection, it must be already configured. Please refer to the eps_cryptoauth_utility for more details.

Project Configuration

1. Add esp-cryptoauthlib as a component to your project with the help of following commands, (First change directory (cd) to your project directory)

    mkdir components
    cd components
    git clone https://github.com/espressif/esp-cryptoauthlib.git

2. Enable the mbedtls ECDSA support in esp-cryptoauthlib with the following config (idf.py menuconfig) option, menuconfig->Component config->esp-cryptoauthlib->Enable Hardware ECDSA keys for mbedTLS

3. Enable support for hardware secure element with the following config (idf.py menuconfig) option, menuconfig->Component config->Amazon Web Services IoT Platform->Use the hardware secure element for authenticating TLS connections

4. Ensure that you call the function atcab_init in the application to initialise the secure_element before you use the AWS IoT component.

5. Project TLS configuration -

   i) If you have the Trust&GO type of ATECC608A chip then you can set mqttInitParams.pDeviceCertLocation = "#" in your project. It will make the esp-aws-iot read the certificate from ATECC608A and use it for the TLS. For the other types of ATECC608A chips, you will need to provide the certificate externally (embed the certificate).

   ii) Tell the esp-aws-iot to find the client private key in a slot by setting mqttInitParams.pDevicePrivateKeyLocation = “#0” in your project, where the digit 0 indicates the slot in the ATECC608A in which the private key is stored. In most circumstances, the key will be stored in slot 0.

Along with the secure element configurations you will have to perform additional example specific configurations (if required).