Domoticz

Install the plugin

Goto your Domoticz Server/setup

cd ~/domoticz/plugin/
git clone https://github.com/poudenes/espmilighthub-domoticz ESPMilight
systemctl restart domoticz.service

Configuring Domoticz

Goto your Domoticz Frontend page

setup > hardware > scroll down in Type and select: ESP8266 Milight Hub

• Give this hardware a name
• Fill in all the info that is asked
• For MQTT settings, enter
  • mqtt_topic_pattern: milight/:device_id/:device_type/:group_id
  • mqtt_state_topic_pattern: milight/state/:hex_device_id/:device_type/:group_id
  • mqtt_update_topic_pattern: milight/updates/:hex_device_id/:device_type/:group_id
• Hit Add

Configuring esp8266_milight_hub

• Go to your Milight Hub then Settings > MQTT. Enter these settings to match the ones above:
  • MQTT topic pattern: milight/:device_id/:device_type/:group_id
  • MQTT state topic pattern: milight/state/:hex_device_id/:device_type/:group_id
  • MQTT update Pattern: milight/updates/:hex_device_id/:device_type/:group_id
• Hit Submit

Getting bulbs to show up in Domoticz

• Now go back to Domoticz and then Setup > Settings
• Below hit Allow for 5 minutes
• Hit "Apply Settings" upper right corner

After this...

• Go back to Milight Hub and switch on/off every bulb you have configured.
• You will see that every bulb will add as device inside Domoticz

Further Reading

Plugin Repo:

https://github.com/galinette2000/espmilighthub-domoticz

Here you find some info when you use dzVents System inside domoticz. Some set options are working some not: http://www.domoticz.com/forum/viewtopic.php?f=65&t=27771&start=20#p213498

Thanks

• Big thank you to @galinette2000 for writing the Domoticz plugin!
• Thanks you to @poudenes for writing these instructions! (Reference: #452)