This repo enables access to Deye Hybrid Inverters & Deye branded inverters like Sunsynk through a Python 3 library. It also provides an Add-On that can be installed in the Home Assistant OS.
This code was developed on a Sunsynk 5.5 kWh inverter.
DISCLAIMER: Use at your own risk! Especially when writing any settings.
Refer to https://kellerza.github.io/sunsynk/
For the Add-On you require Home Assistant OS and a RS-485 adaptor to connect to your Sunsynk inverter. Sensors are read using the Modbus protocol and sent to a MQTT server. See deployment options for examples of tested hardware.
-
Add this repository to your HA Supervisor
https://github.com/kellerza/sunsynk -
Install the Sunsynk Add-On from the Add-On Store and configure through the UI
Below an example of the HomeAssistant Energy management dashboard using sensors from the Sunsynk.
The Python library is available through pip: pip install sunsynk