update readme

README.md

@@ -87,38 +87,157 @@ transfer:
   http: 0.0.0.0:8008
   rpc: 0.0.0.0:8009
   addresses:
-    - 192.168.0.100 # 修改成实际的 n9e 服务器地址
+    - 192.168.100.1 # 修改成实际的 n9e 地址
 
-probe:
-  http: 127.0.0.1:2059
+ams:
+  http: 0.0.0.0:8002
+  addresses:
+    - 192.168.100.1
+
+vsphere-mon:
+  http: 127.0.0.1:2060
 ```
-#### probe.yml
+#### vsphere.yml
 ```yml
 logger:
   dir: logs/
-  level: INFO
+  level: WARNING
   keepHours: 24
 
-probe:
-  # 如果需要区分来自不同区域的探针，可以通过在配置 region 来插入 tag
-  #region: default
-  timeout: 5 # 探测的超时时间，单位是秒
-  limit: 10 # 并发限制
-  interval: 30 # 请求的间隔
-  headers: # 插入到 http 请求中的 headers，可以多条
-    user-agent: Mozilla/5.0 (Linux; Android 6.0.1; Moto G (4)) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.88 Mobile Safari/537.36 Edg/87.0.664.66
-
-ping:
-  107: # n9e 节点上的 nid 号
-    - 114.114.114.114 # 要探测的 ip 地址列表
-    - 114.114.115.115
-
-url:
-  107: # n9e 节点上的 nid 号
-    - https://www.baidu.com # 要探测的 url 地址列表
-    - https://www.sjtu.edu.cn/
-    - https://bbs.ngacn.cc
-    - https://www.163.com
+# 上报的间隔，注意关注下 info.log 的日志，确保能够在一个周期内完成采集
+interval: 300
+
+report:
+  # 调用ams的接口上报数据，需要ams的token
+  token: ams-builtin-token
+  # physical：物理机，virtual：虚拟机，container：容器，switch：交换机
+  cate: physical
+  # 使用哪个字段作为唯一KEY，即作为where条件更新对应记录，一般使用sn或ip
+  uniqkey: ip  
+  # 租户，如果配置则直接注册到该租户下
+  tenant: 
+# 要监控的 vsphere 的配置信息
+
+vspheres:
+    # vcenter 的地址
+  - addr: https://1.1.1.1/sdk
+    # vcenter 的用户名
+    user: [email protected]
+    # vcetner 的密码
+    pwd: password
+    # 是否开启 esxi 的扩展指标监控，注意这会增加 vcenter 的负担
+    esxiperf: true
+    # 是否开启虚拟机的监控，注意这会增加 vcenter 的负担
+    vm: true
+    # 虚拟机监控所在的节点 ID（设备无关）
+    nid: 137
+    # 采集的虚拟机列表，如果是空数组则采集所有的虚拟机信息。
+    # 虚拟机数量的增加不会增加 vcenter 的负担，这里允许控制虚拟机采集数量的目的是可以减少 n9e 的负担，削减指标数量。
+    vmlist: ["VC"]
+    # 是否开启虚拟机的扩展指标监控，注意这会增加 vcenter 的负担
+    vmperf: true
+    # 采集虚拟机扩展指标监控的虚机列表，如果是空数组则采集所有虚机的扩展指标
+    # 注意这里的虚机数量越多，对 vcenter 的负担越大，建议只对重点关注的虚机开启
+    vmperflist: ["VC"] 
+  - addr: https://2.2.2.2/sdk
+    user: [email protected]
+    pwd: password
+    esxiperf: false
+    vm: false
+    nid: 138
+    vmlist: []
+    vmperf: false
+    vmperflist: [] 
+
+# 扩展的性能指标，注意采集越多对 vc 的负担就越大    
+# 建议根据实际需求配置
+# 更多指标和相关含义见 vmware 官网 
+# https://vdc-repo.vmware.com/vmwb-repository/dcr-public/790263bc-bd30-48f1-af12-ed36055d718b/e5f17bfc-ecba-40bf-a04f-376bbb11e811/vim.PerformanceManager.html#counterTables
+performance:    
+  # esxi 宿主机的额外扩展指标
+  esxi:
+    - cpu.coreUtilization.average
+    - cpu.costop.summation
+    - cpu.demand.average
+    - cpu.idle.summation
+    - cpu.latency.average
+    - cpu.readiness.average
+    - cpu.ready.summation
+    - cpu.swapwait.summation
+    - cpu.usage.average
+    - cpu.usagemhz.average
+    - cpu.used.summation
+    - cpu.utilization.average
+    - cpu.wait.summation
+    - disk.deviceReadLatency.average
+    - disk.deviceWriteLatency.average
+    - disk.kernelReadLatency.average
+    - disk.kernelWriteLatency.average
+    - disk.numberReadAveraged.average
+    - disk.numberWriteAveraged.average
+    - disk.read.average
+    - disk.totalReadLatency.average
+    - disk.totalWriteLatency.average
+    - disk.write.average
+    - mem.active.average
+    - mem.latency.average
+    - mem.state.latest
+    - mem.swapin.average
+    - mem.swapinRate.average
+    - mem.swapout.average
+    - mem.swapoutRate.average
+    - mem.totalCapacity.average
+    - mem.usage.average
+    - mem.vmmemctl.average
+    - net.bytesRx.average
+    - net.bytesTx.average
+    - net.droppedRx.summation
+    - net.droppedTx.summation
+    - net.errorsRx.summation
+    - net.errorsTx.summation
+    - net.usage.average
+    - power.power.average
+    - storageAdapter.numberReadAveraged.average
+    - storageAdapter.numberWriteAveraged.average
+    - storageAdapter.read.average
+    - storageAdapter.write.average
+    - sys.uptime.latest
+  # vm 虚拟机的额外扩展指标
+  vm:
+    - cpu.demand.average
+    - cpu.idle.summation
+    - cpu.latency.average
+    - cpu.readiness.average
+    - cpu.ready.summation
+    - cpu.run.summation
+    - cpu.usagemhz.average
+    - cpu.used.summation
+    - cpu.wait.summation
+    - mem.active.average
+    - mem.granted.average
+    - mem.latency.average
+    - mem.swapin.average
+    - mem.swapinRate.average
+    - mem.swapout.average
+    - mem.swapoutRate.average
+    - mem.usage.average
+    - mem.vmmemctl.average
+    - net.bytesRx.average
+    - net.bytesTx.average
+    - net.droppedRx.summation
+    - net.droppedTx.summation
+    - net.usage.average
+    - power.power.average
+    - virtualDisk.numberReadAveraged.average
+    - virtualDisk.numberWriteAveraged.average
+    - virtualDisk.read.average
+    - virtualDisk.readOIO.latest
+    - virtualDisk.throughput.usage.average
+    - virtualDisk.totalReadLatency.average
+    - virtualDisk.totalWriteLatency.average
+    - virtualDisk.write.average
+    - virtualDisk.writeOIO.latest
+    - sys.uptime.latest
 ```
 
 ## 编译

install.sh

@@ -1,4 +1,4 @@
-cp service/vsphere.service  /usr/lib/systemd/system/
+cp service/vsphere-mon.service  /usr/lib/systemd/system/
 systemctl daemon-reload
 systemctl start vsphere-mon
 systemctl enable vsphere-mon