Connect a serial port to an UDP socket
cargo run -- -s /dev/ttyUSB0 -b 115200 -u 0.0.0.0:3456
- -s : serial port
- -b : baudrate
- -u : addr:port. addr is the address to listen to. Use 0.0.0.0 to listen to anyone.
- -t : NOT YET IMPLEMENTED! transport to use with the serial: ducklink or xbee.
Clients are discovered when they initiate a connection. They must initiate the connexion to receive messages. (They must send any paquet to the correct port).