Skip to content

rmoreliovlabs/rootstock-integration-tests

 
 

Repository files navigation

Rootstock Integration tests

Disclaimer

This library is intended to be used for testing purposes only, to avoid any possible risk it is recommended to execute in an isolated environment such as a container or VM.

All private keys used in the library are for testing only and not used in any production environment.

Prerequisites

bitcoind

  • download Current pipeline in jenkins is running bitcoind 0.17, 0.18.1 works for local execution.
    • Go to https://bitcoin.org/en/release/v0.18.1 in this page there is the link to the download sources https://bitcoincore.org/bin/bitcoin-core-0.18.1/ Select the *.tar.gz file according to your OS (for MacOS sillicon bitcoin-0.18.1-osx64.tar.gz) to use curl instead use curl -O https://bitcoin.org/bin/bitcoin-core-0.18.1/bitcoin-0.18.1-osx64.tar.gz
    • Decompress and copy the path to the folder.
    • run in terminal sudo cp <path to bitcoin-core folder>/bin/bitcoin* /usr/local/bin
    • create a folder called bitcoindata in your workspace - this is the folder were the Bitcoin DB is going to be stored.
    • run to test the bitcoind installation standalone bitcoind -deprecatedrpc=generate -addresstype=legacy -regtest -printtoconsole -server -rpcuser=rsk -rpcpassword=rsk -rpcport=18332 -txindex -datadir=<path to bitcoindata> $@

Federate node setup

  • install java the x86 version to be used with rossetta in case of ARM arch (1.8, 11 and 17 can be used).
  • A fatjar of the federate node can be used or follow the setup steps in the powpeg-node to run from scratch.

HSM

  • Clone the HSM repository https://github.com/rootstock/hsm

  • Install python 2.7.16 from the python official site https://www.python.org/downloads/release/python-2716/

  • In terminal execute

    • pip install wheel
    • pip install --no-cache secp256k1==0.13.2 (last version 0.14.0 is not working correctly with python 2)
    • test the hsm1 by executing python fedhm-mockup.py
    • follow the readme in hsm repository for hsm2 config.

    The pipeline uses the same configuration as in regtest.js There is a regtest.js.sample.hsm1only that can be set as regtest.js to avoid usage of hsm2 if required.

NODE.JS

  • Install node.js latest LTS version (recommendation use nvm)

OPTIONAL (LOGS)

In order to keep a log of each federate node a logback can be setup from the regtest.js file per each federate. There is sample in the logbacks folder that can be copied into each of the federate nodes. The sample name is logback-fed1.xml.sample and inside the change is in the line

<file>/PATH/TO/LOGS/fed1.log</file>

to determine where the logs are going to be written. Inside the regtest.js file the logbacks per federate node can be setup and mapped as

const federatesLogbackPath = '/PATH/TO/logbacks/'
const customLogbackFile1 = federatesLogbackPath + 'logback-fed1.xml';
const customLogbackFile2 = federatesLogbackPath + 'logback-fed2.xml';
const customLogbackFile3 = federatesLogbackPath + 'logback-fed3.xml';
const customLogbackFile4 = federatesLogbackPath + 'logback-fed4.xml';
const customLogbackFile5 = federatesLogbackPath + 'logback-fed5.xml';

(The names of the logback files are suggestions)

Running the tests

  1. Clone this repo.
  2. Run npm ci.
  3. Generate a configuration for a standalone execution:
  • Copy the sample: cp config/regtest.js.sample config/regtest.js
  • Set federate.classpath to your local federate node fatjar. Additionally you can set federate.configFile to your local configuration files, if you need to test special conditions or your configuration files are located in a different path.
  • Set federate.hsmConfigs.serverPath to your local HSM emulator script.
  • Optionally specify federate.hsmConfigs.keyPath to your local keys, if you happen to be testing different keys or your keys are located in a different path.
  1. Run npm test to run testcases without interruption or npm run test-fail-fast to stop execution at first testcase failure.

Notes for regtest

  • regtest.js by default has the following mapping:
    • federate1: key file (no hsm)
    • federate2 and federate3: hsm1
    • federate4 and federate5: hsm2 (modify using the same logic that in federate2 and 3 for changing to hsm1 in case of hsm2 not working as explained in the HSM setup section).

Running the tests with a different configuration file

  1. Create a configuration file, e.g., config/anotherconfig.js.
  2. Run NODE_ENV=anotherconfig npm test.

Including/Excluding test cases

Follow normal instructions as described before, replacing step 4 with either:

a. INCLUDE_CASES=file1,file2 npm test

which will only test files under tests that begin with either file1 or file2.

or

b. EXCLUDE_CASES=file3,file4 npm test

which will test everything under tests except for test scripts that begin with either file3 or file4.

Important notice

The test 015 works as a fork test and at the same time is required for the subsequent tests, as it enables the whitelisting HF. If you are going to run a test that uses whitelisting (020,030,040,050 ATM) make sure to include the case 015 in your custom run.

Running the tests on an existing running bitcoind and/or federate node(s)

  1. Copy the sample: cp config/regtest.js.sample config/mynewenv.js
  2. If you want to run your own bitcoin node, delete the btc section and set mineInitialBitcoin to false. Then add a runners.bitcoin section and set the entries host, rpcUser and rpcPassword with the information of your locally running bitcoin node. For example:
runners {
  ...,
  bitcoin: {
    host: '127.0.0.1:18332',
    rpcUser: 'myuser',
    rpcPassword: 'mypassword'
  },
  ...
},
...
  1. If you want to run one or more of your own federate nodes, add a section runners.federates with an array of manually started nodes. Each of these must have: host and publicKeys with the RPC host and public keys of the already running node, respectively. You can still keep automatically started federate nodes if you want to. Then, you can mix manually and automatically started nodes for e.g. debugging. For example:
runners {
  ...,
  federates: [{
    host: '127.0.0.1:5555',
    publicKeys: {
      btc: '02cd53fc53a07f211641a677d250f6de99caf620e8e77071e811a28b3bcddf0be1',
      rsk: '02cd53fc53a07f211641a677d250f6de99caf620e8e77071e811a28b3bcddf0be1',
      mst: '02cd53fc53a07f211641a677d250f6de99caf620e8e77071e811a28b3bcddf0be1',
    },
    nodeId: '62634ab57dae9cb373a5d536e66a8c4f67468bbcfb063809bab643072d78a1243bd206c2c7a218d6ff4c9a185e71f066bd354e5267875b7683fbc70a1d455e87'
  }, {
    host: '127.0.0.1:6666',
    publicKeys: {
      btc: '031da807c71c2f303b7f409dd2605b297ac494a563be3b9ca5f52d95a43d183cc5',
      rsk: '031da807c71c2f303b7f409dd2605b297ac494a563be3b9ca5f52d95a43d183cc5',
      mst: '031da807c71c2f303b7f409dd2605b297ac494a563be3b9ca5f52d95a43d183cc5',
    },
    nodeId: '72634ab57dae9cb373a5d536e76a8c4f67468bbcfb063809bab643072d78a1243bd206c2c7a218d6ff4c9a185e71f066bd354e5267875b7683fbc70a1d455e84'
  }],
  ...
},
...
  1. Run the tests on the mynewenv environment like so:
NODE_ENV=mynewenv npm test

Configurations

The runners will override certain configurations. Be aware that if you modify your config files for each of these entries it will be ignored and overriden by the runners. This doesn't apply for the node you run on your own. Some of them are listed below:

  • General configurations. We will send the command argument --regtest to use the default regtest configurations for the node.
  • Miner. the node miner will be disabled by manual configuration to let the test mine manually using evm_mine.
  • Signers. Using the configuration from each federate node we will decide whether we need or not to start HSM signers. Additionally we will override the signer's configuration on each node. See here for more details about HSM specific configurations. If you don't have/want to use HSM, use this guide instead.
  • RPC port. The port used for RPC communication will be overriden using a tool to detect available ports (between 30000 and 30100)
  • Peer port. Same as RPC port, we are using the same port range to get available ports.

Important information regarding config files

One of the settings in regtest.js nodeId MUST match the value for each node in its corresponding config file. You can find this value under peer. The config file will have at least 2 values under peer:

  • nodeId: just for reference, to be used in the regtest.js configuration.
  • privateKey: the value that the node will use to obtain the corresponding nodeId and publicKey. It's important to note that both nodeId and privateKey must be in sync, or else the integration test will fail.

Using HSM

There is a specific section in each federate element to determine how to start the HSM signer.

hsmConfigs: {
  version: '1',
  keyPath: '../configs/keys/reg1.key',
  serverPath: '/your-path-to-hsm-source-code/simulator/fedhm-mockup.py',
  port: '9999'
  printOutput: true
}
  • version: indicates which version of HSM should be used. By default uses '1'. Accepted values are: 1, 2, 2_stateless (this version is just temporary required and will be removed in the future).
  • keyPath: only needed if you are using the mockup or the emulator. The format of this file depends on the version of the HSM used.
  • serverPath: path to the source code of the HSM signer.
  • port: only needed if you want to use a fixed port. By default it will try to get a free port from the range 40000 to 40100.
  • printOutput: enables/disables the specific output of the HSM server.

keyPath for HSM 2

The emulator expects to receive a valid JSON file that must respect the following format:

{
  "m/44'/1'/0'/0/0": "PRIVATE_KEY",
  "m/44'/1'/0'/0/1": "PRIVATE_KEY",
  "m/44'/1'/0'/0/2": "PRIVATE_KEY"
}

These derivation paths correspond to the following key ids:

BTC key id - m/44'/1'/0'/0/0
RSK key id - m/44'/1'/0'/0/1
MST key id - m/44'/1'/0'/0/2

Not using HSM

If you don't want to use HSM you can fallback to keyfile signer. To do this you will have to do three things:

  1. delete/comment the hsmConfigs section in your federate elements.
  2. override the default config file settings to use keyfile.
  3. add publicKeys config with each key type (btc, rsk and mst). This is required due to key control and federation change testing (the latter only for non-genesis federate members). The public key must be obtained deriving it from the private key specified in the config files (see #2). If you don't know how to calculate it, you can use this website www.bitaddress.org going directly to the wallet details tab and copy/pasting the private key there. The value you want is the public key compressed.

To override the settings you have two ways:

  • Go directly to the config file and replace the signer section of the federator to match the following:
signers {
  BTC {
    type = "keyFile"
    path = "/path-to-utilities/configs/keys/reg1-btc.key"
  }
  RSK {
    type = "keyFile"
    path = "/path-to-utilities/configs/keys/reg1-rsk.key"
  }
}
  • Specify a custom config that overrides the original config. To do so you would have to add a customConfig element in the federate elements as follows:
customConfig: {
  'federator.signers.BTC.type': 'keyFile',
  'federator.signers.BTC.path': '/path-to-utilities/configs/keys/reg1-btc.key',
  'federator.signers.BTC.type': 'keyFile',
  'federator.signers.BTC.path': '/path-to-utilities/configs/keys/reg1-rsk.key'
}

Both ways are valid, but keep in mind that the config files are controlled by git so make sure to avoid pushing an unwanted modification.

Additional considerations

  • Run bash configure.sh in order to run chmod 400 to the keys on config/node-keys.

  • In case Sync testcase fails, run command ps aux | grep java and check services. In case of having related processes running, kill them or reboot your system. It could also be related to having an instance of bitcoind running.

Running the tests multiple times

Running all tests multiple times from scratch

To run all tests multiple times from scratch, right after all tests finished running, run:

node testRunner.js

Or with npm:

npm run run-tests-multiple-times

You can specify how many times to run all tests from scratch by adding the times to run them in the RUN_ALL_TESTS_THESE_TIMES property in the .env file.

Remember to copy the .env-example file and rename it as .env file.

Or, you can pass te times you want to run the tests from scratch using the --times flag, like this:

npm run run-tests-multiple-times --times 3

The npm run run-tests-multiple-times command is executing the file testRunner.js, which uses shelljs to execute the script npm run test-fail-fast in a loop and counts the failures and print some information to the console.

Running a specific test file multiple times

To run a specific test file multiple times, include the test file name in the INCLUDE_CASES property in the .env file, like:

INCLUDE_CASES=01_01_01-pre_orchid_2wp.js

Then update the RUN_EACH_TEST_FILE_THESE_TIMES property in the .env file to indicate how many times to run this single file.

Then run the tests as usual:

npm run test

Or:

npm run test-fail-fast

Note

Remember that with this approach we are not running the test file from scratch every time. Each test run will run in the same instance as the others, meaning, it will use the same btc and rsk networks with the same state. If you don't want this, then use the approach described above Running all tests multiple times from scratch.

To run specific test files from scratch, use the same setup described in this section, and for the script instead run:

npm run run-tests-multiple-times

This will run specific test files from scratch.

If you set RUN_EACH_TEST_FILE_THESE_TIMES to a value greater than 1 and also set RUN_ALL_TESTS_THESE_TIMES to a value greater than one at the same time, then the tests files specified in INCLUDE_CASES will run RUN_EACH_TEST_FILE_THESE_TIMES by RUN_ALL_TESTS_THESE_TIMES times, which may not be what you desire. So, remember to only set one of these to a value greater than 1 at a time, or both if you know what you're doing.

Remember to run ...activate_x_fork.js file if running a file test that depends on an unactivated fork.

For example, if you only wants to run 01_03_54-post-papyrus_coinbase_information.js, you first need to run 01_03_50-activate_papyrus_fork.js.

Make sure you have enough memory before running the tests, close unnecessary projects and apps. Sometimes the fits cannot build properly if it doesn't have enough memory.

Running a single file test

Most of the tests are dependant on some previous state of the blockchain to function properly and thus cannot be run individually.

To fix this, we can have a function called fulfillRequirementsToRunAsSingleTestFile in each test file that acts as a utility to make the blockchain be at the state where our test will run properly without depending on other previous tests.

This is useful specially during development that most of the time that we spent adding or updating tests is waiting for all the tests before our test to run. If our test is one of the last tests, then we will potentially wait more than 15 minutes for the build to reach our test.

To run a test file that has the fulfillRequirementsToRunAsSingleTestFile function, simply run the following npm command:

npm run run-single-test-file <filename.js>

For example:

npm run run-single-test-file 01_02_51-post_wasabi_fed_pubkeys_fork.js

The command run-single-test-file will execute the file singleTestFileRunner.js which has some simple logic:

1 - It will assign the 01_02_51-post_wasabi_fed_pubkeys_fork.js test file name to the process.env.INCLUDE_CASES variable. Since it will be the one in that INCLUDE_CASES variable, then only that test file will be run.

2 - It will setup a boolean process.env.RUNNING_SINGLE_TEST_FILE variable to true so the fulfillRequirementsToRunAsSingleTestFile function can check if it needs to manually take the blockchain to a state where the test file can run or not.

The test file should have a fulfillRequirementsToRunAsSingleTestFile function to be called in the before function because each test file has different requirements to be able to run. Some will need to mine blocks, fund the bridge, activate 1 or more forks, etc. Some will be able to run without any prior preparation.

Another advantage of this is that it will allow us to understand exactly what each test really needs in order to run, reducing uncertainties.

To indicate a fork name to be used in the fulfillRequirementsToRunAsSingleTestFile function, you can specify it as the last argument of the command like this, passing the fork name fingerroot500:

npm run run-single-test-file 02_00_01-2wp.js fingerroot500

This is when the fulfillRequirementsToRunAsSingleTestFile function needs a fork name that needs to be dynamically passed. For example, the 2wp.js file is run multiple times with different forks. We cannot simply hardcode which fork to use or to use the latest, because sometimes we will need to run it with a fork passed dynamically.

About

Rootstock integration tests

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • JavaScript 97.4%
  • Solidity 1.1%
  • Other 1.5%