Send Seat Connect Data to MQTT :-)
At the end of the queries, the script sends various MQTT messages to the broker. The following settings can be set using the environment variables:
| ENV variable | Require | Description |
|---|---|---|
MQTT_BROKER_SERVER |
yes | Mqtt Broker Address (192.168.0.100 or myBrocker.de) |
MQTT_BROKER_PORT |
yes | Mqtt Broker Port (Default: 1883) |
MQTT_BROKER_USER |
no | Mqtt User (not used at the moment) |
MQTT_BROKER_PASS |
no | Mqtt Pass (not used at the moment) |
The following topics are played out:
| topic | Description |
|---|---|
MQTT_BROKER_TOPIC/json |
Contains the data as a json blob |
MQTT_BROKER_TOPIC/openhab/.. |
see openHAB section below |
MQTT_BROKER_TOPIC/single/... |
each individual data point as a separate topic |
If the environment variable SETTINGS_OPENHAB_USE is set to true, under the topic
MQTT_BROKER_TOPIC/openhab/..., every single data point formatted appropriately for openHAB. Especially the location.
If the environment variable SETTINGS_ADDRESS_LOOKUP is set to true, the GPS position of the vehicle is resolved into an address. This is done via the openStreetMap.org API ( Licence ).
The output format is: street house number, postcode city.