Reference for using Red Hat Enterprise Linux 9 with the Honeycomb LX2 Board.
The attached files are tested for use with kernel-5.14.0-70.17.1.el9_0.src.rpm.
- The sed line below is just tagging the kernel with a custom build ID so it's not confused with the original RHEL package. You can use whatever you like there.
- The wiki in this repo has the specific kernel options that were enabled. Nothing else was changed, disabled, or adjusted from the RHEL9 default.
yum install yum-utils
yumdownloader --source kernel (downloads kernel src RPM from RedHat)
rpm -Uvh kernel-5.14.0-70.17.1.el9_0.src.rpm
cp kernel-aarch64-rhel.config ~/rpmbuild/SOURCES
cp kernel-local ~/rpmbuild/SOURCES
sed 's/# define buildid .local/%define buildid .honeycomb/g' -i ~/rpmbuild/SPECS/kernel.spec
rpmbuild -bb --with baseonly --without debuginfo kernel.spec
- I need to build a custom kernel
- Building a custom kernel/Source RPM
- SolidRun HoneyComb/Clearfog ARM Workstation Up-and-running
- Discord thread on kernel options
- Fedora Aarch64 on the SolidRun HoneyComb LX2K
- Rocking a 16 core ARM workstation for data analysis and NAS – HoneyComb LX2K
- LX2160A Software
There are also wiki pages with content attached to this repo, hit the "Wiki" tab at the top.