raspberrypilearning · ninaszymor · Jun 18, 2020 · Jun 18, 2020 · Jun 18, 2020 · Jun 18, 2020
diff --git a/af-ZA/images/Snowman-TILE.png b/af-ZA/images/Snowman-TILE.png
diff --git a/af-ZA/images/banner.png b/af-ZA/images/banner.png
diff --git a/af-ZA/images/blender-arc-tool.png b/af-ZA/images/blender-arc-tool.png
diff --git a/af-ZA/images/blender-drag-cone-1.png b/af-ZA/images/blender-drag-cone-1.png
diff --git a/af-ZA/images/blender-drag-cone-2.png b/af-ZA/images/blender-drag-cone-2.png
diff --git a/af-ZA/images/blender-drag-cylinder.png b/af-ZA/images/blender-drag-cylinder.png
diff --git a/af-ZA/images/blender-head-render-1.png b/af-ZA/images/blender-head-render-1.png
diff --git a/af-ZA/images/blender-head-render-2.png b/af-ZA/images/blender-head-render-2.png
diff --git a/af-ZA/images/blender-head-render-3.png b/af-ZA/images/blender-head-render-3.png
diff --git a/af-ZA/images/blender-position-cone-1.png b/af-ZA/images/blender-position-cone-1.png
diff --git a/af-ZA/images/blender-position-cone-2.png b/af-ZA/images/blender-position-cone-2.png
diff --git a/af-ZA/images/blender-render-bottom-1.png b/af-ZA/images/blender-render-bottom-1.png
diff --git a/af-ZA/images/blender-render-bottom-2.png b/af-ZA/images/blender-render-bottom-2.png
diff --git a/af-ZA/images/blender-render-nose.png b/af-ZA/images/blender-render-nose.png
diff --git a/af-ZA/images/blender-render-snowman-1.png b/af-ZA/images/blender-render-snowman-1.png
diff --git a/af-ZA/images/blender-resize-cone.png b/af-ZA/images/blender-resize-cone.png
diff --git a/af-ZA/images/blender-resize-cylinder.png b/af-ZA/images/blender-resize-cylinder.png
diff --git a/af-ZA/images/blender-rotate-cone-1.png b/af-ZA/images/blender-rotate-cone-1.png
diff --git a/af-ZA/images/blender-rotate-cone-2.png b/af-ZA/images/blender-rotate-cone-2.png
diff --git a/af-ZA/images/blender-rotate-cone-3.png b/af-ZA/images/blender-rotate-cone-3.png
diff --git a/af-ZA/images/blender-rotate-nose-tool.png b/af-ZA/images/blender-rotate-nose-tool.png
diff --git a/af-ZA/images/blender-snowman-add-head.png b/af-ZA/images/blender-snowman-add-head.png
diff --git a/af-ZA/images/blender-snowman-challenge.png b/af-ZA/images/blender-snowman-challenge.png
diff --git a/af-ZA/images/blender-snowman-egg-bottom.png b/af-ZA/images/blender-snowman-egg-bottom.png
diff --git a/af-ZA/images/blender-snowman-resize-bottom-1.png b/af-ZA/images/blender-snowman-resize-bottom-1.png
diff --git a/af-ZA/images/blender-snowman.png b/af-ZA/images/blender-snowman.png
diff --git a/af-ZA/images/blender-start.png b/af-ZA/images/blender-start.png
diff --git a/af-ZA/images/blender-transformations.png b/af-ZA/images/blender-transformations.png
diff --git a/af-ZA/images/move-tool.png b/af-ZA/images/move-tool.png
diff --git a/af-ZA/images/remove-cube.png b/af-ZA/images/remove-cube.png
diff --git a/af-ZA/images/rotate-tool.png b/af-ZA/images/rotate-tool.png
diff --git a/af-ZA/images/scale-tool.png b/af-ZA/images/scale-tool.png
diff --git a/af-ZA/images/uv-sphere.png b/af-ZA/images/uv-sphere.png
diff --git a/af-ZA/meta.yml b/af-ZA/meta.yml
@@ -0,0 +1,30 @@
+---
+title: Snowman
+hero_image: images/banner.png
+description: Build a 3D model of a snowman using Blender
+theme: red #possible values: blue, green, navy, orange, red, turquoise, violet, yellow
+duration: 2
+listed: true
+ingredient: false
+copyedit: true
+curriculum: 1, design-1, programming-0, phys-comp-0, manufacture-0, community-0
+interests: art
+technologies: blender
+site_areas: projects
+hardware: ''
+software: blender
+version: 4
+last_tested: 2020-01-28
+steps:
+  - 
+    title: Introduction
+  - 
+    title: "Snowman's bottom"
+  - 
+    title: "Snowman's head"
+  - 
+    title: "Snowman's nose"
+  - 
+    title: "Snowman's hat"
+  - 
+    title: "Challenge: eyes, arms, and buttons"
diff --git a/af-ZA/resources/snowman.blend b/af-ZA/resources/snowman.blend
diff --git a/af-ZA/step_1.md b/af-ZA/step_1.md
@@ -0,0 +1,47 @@
+## Introduction
+
+Create a 3D model of a snowman using Blender!
+
+### What you will make
+
+Here is how your finished piece will look:
+
+<div class="responsive-embed responsive-embed--video">
+  <iframe class="responsive-embed__iframe" src="https://sketchfab.com/models/0eb783a971794dae9f7bb4ee63debff0/embed" frameborder="0" allowvr allowfullscreen mozallowfullscreen="true" webkitallowfullscreen="true"></iframe>
+</div>
+
+## \--- collapse \---
+
+## title: "What you will learn"
+
+This project covers elements from the following strands of the [Raspberry Pi Digital Making Curriculum](http://rpf.io/curriculum){:target="_blank"}:
+
++ [Design basic 2D and 3D assets](https://curriculum.raspberrypi.org/design/creator/){:target="_blank"}
+
+\--- /collapse \---
+
+## \--- collapse \---
+
+## title: "What you will need"
+
+### Hardware
+
++ A desktop or laptop computer capable of running the Blender software
+
+### Software
+
++ [Blender](https://www.blender.org/download/){:target="_blank"} (v2.8 or newer)
+
+\--- /collapse \---
+
+### Additional information for educators
+
+If you need to print this project, please use the [printer-friendly version](https://projects.raspberrypi.org/en/projects/blender-snowman/print){:target="_blank"}.
+
+Use the link in the footer to access the GitHub repository for this project, which contains all resources (including an example finished project) in the 'en/resources' folder.
+
+If you prefer, you can watch the whole resource as a video tutorial: <iframe width="560" height="315" src="https://www.youtube.com/embed/-BDjqjdWt7w" frameborder="0" allowfullscreen mark="crwd-mark"></iframe> 
+
+### License
+
+***Snowman*** by 3Dami & b3d101, Peter Kemp, Tom Haines, Monique Dewanchand is licenced under a [Creative Commons Attribution 4.0 International License](http://creativecommons.org/licenses/by-sa/4.0/).
diff --git a/af-ZA/step_2.md b/af-ZA/step_2.md
@@ -0,0 +1,53 @@
+## Snowman's bottom
+
++ Open Blender.
+
++ For this tutorial we won't be needing the splash screen, so click to the right and the splash screen will disappear.
+
+To create a snowman, we won't be needing a cube. Instead we need to add a ball or sphere.
+
++ Remove the cube by selecting the cube, pressing <kbd>X</kbd>, and then pressing <kbd>Enter</kbd>.
+
+![Remove cube](images/remove-cube.png)
+
+Now we need to add a sphere.
+
++ Click the **Add** dropdown menu in the top left corner of the 3D View, then select **Mesh** > **UV Sphere**.
+
+![UV Sphere](images/uv-sphere.png)
+
+By adding the UV Sphere, we have created a nice round bottom for the snowman.
+
++ To see what it looks like, press <kbd>F12</kbd> (or if you're working on a Mac, <kbd>FN + F12</kbd>) to render your image.
+
+The snowman's bottom looks a bit too small, so let's resize the UV sphere.
+
++ Press <kbd>ESC</kbd> to exit the render view.
+
++ Make sure the UV sphere and the **Scale** tool (in the left-hand panel) are selected, then use the blue, green, and red handles to resize it.
+
+![Cube ends](images/scale-tool.png)
+
+You'll probably notice that it's hard to get the proper shape using the handles. It might end up looking like a giant egg. For example:
+
+![Egg bottom](images/blender-snowman-egg-bottom.png)
+
+However, there is another way to do this.
+
++ First, remove the UV sphere and add another one.
+
++ Make sure your mouse is in the 3D view and the new UV sphere is selected. Press <kbd>S</kbd> — now you can uniformly resize the UV sphere by just dragging your mouse.
+
+![Resize bottom](images/blender-snowman-resize-bottom-1.png)
+
+When it's as big as you want it to be, just left click to confirm the size.
+
+You can check the size of the UV sphere by rendering it.
+
++ Press <kbd>F12</kbd> or <kbd>FN + F12</kbd> if you're working on a Mac. Check the size of the UV sphere, then press <kbd>ESC</kbd> to exit the render view.
+
+![Render bottom](images/blender-render-bottom-1.png)
+
+If the sphere looks too big, resize it again by pressing <kbd>S</kbd> and then dragging the mouse. Render to see if the size is appropriate. For example:
+
+![Render bottom again](images/blender-render-bottom-2.png)
diff --git a/af-ZA/step_3.md b/af-ZA/step_3.md
@@ -0,0 +1,35 @@
+## Snowman's head
+
+Now we need a head for the snowman.
+
++ Add another UV sphere.
+
+If it looks like no new sphere has appeared, don't worry — you might not be able to see it, because it was added inside the snowman's bottom. We need to drag it out.
+
++ Select the move tool from the left menu.
+
+![Arrow ends](images/move-tool.png)
+
++ Drag the UV sphere out using the blue handle (z-axis), and place it on top of the other sphere to make the head.
+
+![Add the head](images/blender-snowman-add-head.png)
+
++ Now render your image to see what it looks like. For example:
+
+![Render the head](images/blender-head-render-1.png)
+
+The head may look a bit big, so let's shrink it down.
+
++ Press <kbd>ESC</kbd> to get out of the render view.
+
++ Select the head UV sphere, then press <kbd>S</kbd> to resize the object. Drag and move the mouse towards the centre of the object to make it smaller.
+
++ Render again to see what the image looks like. For example:
+
+![Render the head again](images/blender-head-render-2.png)
+
+If the head is too small or large, resize it to make it look right.
+
++ The head might not be stuck onto the snowman's bottom in the right position. Move the head onto the bottom using the handles. Check what it looks like by rendering the image. For example:
+
+![Render the head on the bottom](images/blender-head-render-3.png)
diff --git a/af-ZA/step_4.md b/af-ZA/step_4.md
@@ -0,0 +1,49 @@
+## Snowman's nose
+
+Usually a snowman's nose is made of a carrot — we'll use a cone for it.
+
++ Go to the **Add** dropdown menu and select **Cone** from the **Mesh** section.
+
++ The cone will probably be added inside the bottom again, so use the blue move handle to move it up.
+
+![Drag cone](images/blender-drag-cone-1.png)
+
+![Cone appears](images/blender-drag-cone-2.png)
+
+The cone might look too big to be the nose, so you need to resize it.
+
++ Resize the cone either using the shortcut key <kbd>S</kbd> or the scale tool, which might be a bit handier for this purpose.
+
+For example:
+
+![Resize the cone](images/blender-resize-cone.png)
+
++ After you have resized the cone, use the move tool to shift it onto the side of the snowman's head, just where the nose should be:
+
+For example:
+
+![Position the cone](images/blender-position-cone-2.png)
+
+You need to rotate the nose to stick it properly onto the snowman's head. For this you will use the rotation tool.
+
+![Position the cone](images/rotate-tool.png)
+
++ Make sure the nose cone is selected, then select the rotation tool (the arc) from the lower menu.
+
+You'll see arcs or little curves that you can use to manipulate and shape the nose.
+
+![Rotate the nose](images/blender-rotate-nose-tool.png)
+
+Use the curve (red, blue, or green) that will allow you to rotate the nose in the direction you want. For example:
+
+![Rotate the nose](images/blender-rotate-cone-1.png)
+
+![Rotate the nose more](images/blender-rotate-cone-2.png)
+
++ Switch back to the move tool.
+
++ Position the nose properly using the blue, green, and red handles.
+
+![Position the nose](images/blender-rotate-cone-3.png)
+
++ Now render and check how the snowman looks. Is the nose positioned properly? Does your model resemble a snowman?
diff --git a/af-ZA/step_5.md b/af-ZA/step_5.md
@@ -0,0 +1,19 @@
+## Snowman's hat
+
+Now let's add a hat to the snowman. The hat will be made from a cylinder.
+
++ Add a **Cylinder** from the **Add** dropdown menu's **Mesh** section.
+
+The cylinder might be added inside the UV sphere, so once again use the blue handle to move it upwards.
+
+![Drag cylinder](images/blender-drag-cylinder.png)
+
++ Resize the cylinder using the shortcut key <kbd>S</kbd>, moving the mouse towards the middle of the cylinder to make it smaller.
+
+![Resize cylinder](images/blender-resize-cylinder.png)
+
++ Move the cylinder on top of the snowman's head using the blue, green, and red move handles.
+
++ Render to see what the snowman looks like. For example:
+
+![Render the snowman](images/blender-render-snowman-1.png)
diff --git a/af-ZA/step_6.md b/af-ZA/step_6.md
@@ -0,0 +1,7 @@
+## Challenge: eyes, arms, and buttons
+
++ Give the snowman some eyes, buttons, and arms.
+
+![Eyes buttons and arms](images/blender-snowman.png)
+
++ Perhaps you could add a scarf?
diff --git a/ar-SA/images/Snowman-TILE.png b/ar-SA/images/Snowman-TILE.png
diff --git a/ar-SA/images/banner.png b/ar-SA/images/banner.png
diff --git a/ar-SA/images/blender-arc-tool.png b/ar-SA/images/blender-arc-tool.png
diff --git a/ar-SA/images/blender-drag-cone-1.png b/ar-SA/images/blender-drag-cone-1.png
diff --git a/ar-SA/images/blender-drag-cone-2.png b/ar-SA/images/blender-drag-cone-2.png
diff --git a/ar-SA/images/blender-drag-cylinder.png b/ar-SA/images/blender-drag-cylinder.png
diff --git a/ar-SA/images/blender-head-render-1.png b/ar-SA/images/blender-head-render-1.png
diff --git a/ar-SA/images/blender-head-render-2.png b/ar-SA/images/blender-head-render-2.png
diff --git a/ar-SA/images/blender-head-render-3.png b/ar-SA/images/blender-head-render-3.png
diff --git a/ar-SA/images/blender-position-cone-1.png b/ar-SA/images/blender-position-cone-1.png
diff --git a/ar-SA/images/blender-position-cone-2.png b/ar-SA/images/blender-position-cone-2.png
diff --git a/ar-SA/images/blender-render-bottom-1.png b/ar-SA/images/blender-render-bottom-1.png
diff --git a/ar-SA/images/blender-render-bottom-2.png b/ar-SA/images/blender-render-bottom-2.png
diff --git a/ar-SA/images/blender-render-nose.png b/ar-SA/images/blender-render-nose.png
diff --git a/ar-SA/images/blender-render-snowman-1.png b/ar-SA/images/blender-render-snowman-1.png
diff --git a/ar-SA/images/blender-resize-cone.png b/ar-SA/images/blender-resize-cone.png
diff --git a/ar-SA/images/blender-resize-cylinder.png b/ar-SA/images/blender-resize-cylinder.png
diff --git a/ar-SA/images/blender-rotate-cone-1.png b/ar-SA/images/blender-rotate-cone-1.png
diff --git a/ar-SA/images/blender-rotate-cone-2.png b/ar-SA/images/blender-rotate-cone-2.png
diff --git a/ar-SA/images/blender-rotate-cone-3.png b/ar-SA/images/blender-rotate-cone-3.png
diff --git a/ar-SA/images/blender-rotate-nose-tool.png b/ar-SA/images/blender-rotate-nose-tool.png
diff --git a/ar-SA/images/blender-snowman-add-head.png b/ar-SA/images/blender-snowman-add-head.png
diff --git a/ar-SA/images/blender-snowman-challenge.png b/ar-SA/images/blender-snowman-challenge.png
diff --git a/ar-SA/images/blender-snowman-egg-bottom.png b/ar-SA/images/blender-snowman-egg-bottom.png
diff --git a/ar-SA/images/blender-snowman-resize-bottom-1.png b/ar-SA/images/blender-snowman-resize-bottom-1.png
diff --git a/ar-SA/images/blender-snowman.png b/ar-SA/images/blender-snowman.png
diff --git a/ar-SA/images/blender-start.png b/ar-SA/images/blender-start.png
diff --git a/ar-SA/images/blender-transformations.png b/ar-SA/images/blender-transformations.png
diff --git a/ar-SA/images/move-tool.png b/ar-SA/images/move-tool.png
diff --git a/ar-SA/images/remove-cube.png b/ar-SA/images/remove-cube.png
diff --git a/ar-SA/images/rotate-tool.png b/ar-SA/images/rotate-tool.png
diff --git a/ar-SA/images/scale-tool.png b/ar-SA/images/scale-tool.png
diff --git a/ar-SA/images/uv-sphere.png b/ar-SA/images/uv-sphere.png
diff --git a/ar-SA/meta.yml b/ar-SA/meta.yml
@@ -0,0 +1,30 @@
+---
+title: Snowman
+hero_image: images/banner.png
+description: Build a 3D model of a snowman using Blender
+theme: red #possible values: blue, green, navy, orange, red, turquoise, violet, yellow
+duration: 2
+listed: true
+ingredient: false
+copyedit: true
+curriculum: 1, design-1, programming-0, phys-comp-0, manufacture-0, community-0
+interests: art
+technologies: blender
+site_areas: projects
+hardware: ''
+software: blender
+version: 4
+last_tested: 2020-01-28
+steps:
+  - 
+    title: Introduction
+  - 
+    title: "Snowman's bottom"
+  - 
+    title: "Snowman's head"
+  - 
+    title: "Snowman's nose"
+  - 
+    title: "Snowman's hat"
+  - 
+    title: "Challenge: eyes, arms, and buttons"
diff --git a/ar-SA/resources/snowman.blend b/ar-SA/resources/snowman.blend
diff --git a/ar-SA/step_1.md b/ar-SA/step_1.md
@@ -0,0 +1,47 @@
+## Introduction
+
+Create a 3D model of a snowman using Blender!
+
+### What you will make
+
+Here is how your finished piece will look:
+
+<div class="responsive-embed responsive-embed--video">
+  <iframe class="responsive-embed__iframe" src="https://sketchfab.com/models/0eb783a971794dae9f7bb4ee63debff0/embed" frameborder="0" allowvr allowfullscreen mozallowfullscreen="true" webkitallowfullscreen="true"></iframe>
+</div>
+
+## \--- collapse \---
+
+## title: "What you will learn"
+
+This project covers elements from the following strands of the [Raspberry Pi Digital Making Curriculum](http://rpf.io/curriculum){:target="_blank"}:
+
++ [Design basic 2D and 3D assets](https://curriculum.raspberrypi.org/design/creator/){:target="_blank"}
+
+\--- /collapse \---
+
+## \--- collapse \---
+
+## title: "What you will need"
+
+### Hardware
+
++ A desktop or laptop computer capable of running the Blender software
+
+### Software
+
++ [Blender](https://www.blender.org/download/){:target="_blank"} (v2.8 or newer)
+
+\--- /collapse \---
+
+### Additional information for educators
+
+If you need to print this project, please use the [printer-friendly version](https://projects.raspberrypi.org/en/projects/blender-snowman/print){:target="_blank"}.
+
+Use the link in the footer to access the GitHub repository for this project, which contains all resources (including an example finished project) in the 'en/resources' folder.
+
+If you prefer, you can watch the whole resource as a video tutorial: <iframe width="560" height="315" src="https://www.youtube.com/embed/-BDjqjdWt7w" frameborder="0" allowfullscreen mark="crwd-mark"></iframe> 
+
+### License
+
+***Snowman*** by 3Dami & b3d101, Peter Kemp, Tom Haines, Monique Dewanchand is licenced under a [Creative Commons Attribution 4.0 International License](http://creativecommons.org/licenses/by-sa/4.0/).
diff --git a/ar-SA/step_2.md b/ar-SA/step_2.md
@@ -0,0 +1,53 @@
+## Snowman's bottom
+
++ Open Blender.
+
++ For this tutorial we won't be needing the splash screen, so click to the right and the splash screen will disappear.
+
+To create a snowman, we won't be needing a cube. Instead we need to add a ball or sphere.
+
++ Remove the cube by selecting the cube, pressing <kbd>X</kbd>, and then pressing <kbd>Enter</kbd>.
+
+![Remove cube](images/remove-cube.png)
+
+Now we need to add a sphere.
+
++ Click the **Add** dropdown menu in the top left corner of the 3D View, then select **Mesh** > **UV Sphere**.
+
+![UV Sphere](images/uv-sphere.png)
+
+By adding the UV Sphere, we have created a nice round bottom for the snowman.
+
++ To see what it looks like, press <kbd>F12</kbd> (or if you're working on a Mac, <kbd>FN + F12</kbd>) to render your image.
+
+The snowman's bottom looks a bit too small, so let's resize the UV sphere.
+
++ Press <kbd>ESC</kbd> to exit the render view.
+
++ Make sure the UV sphere and the **Scale** tool (in the left-hand panel) are selected, then use the blue, green, and red handles to resize it.
+
+![Cube ends](images/scale-tool.png)
+
+You'll probably notice that it's hard to get the proper shape using the handles. It might end up looking like a giant egg. For example:
+
+![Egg bottom](images/blender-snowman-egg-bottom.png)
+
+However, there is another way to do this.
+
++ First, remove the UV sphere and add another one.
+
++ Make sure your mouse is in the 3D view and the new UV sphere is selected. Press <kbd>S</kbd> — now you can uniformly resize the UV sphere by just dragging your mouse.
+
+![Resize bottom](images/blender-snowman-resize-bottom-1.png)
+
+When it's as big as you want it to be, just left click to confirm the size.
+
+You can check the size of the UV sphere by rendering it.
+
++ Press <kbd>F12</kbd> or <kbd>FN + F12</kbd> if you're working on a Mac. Check the size of the UV sphere, then press <kbd>ESC</kbd> to exit the render view.
+
+![Render bottom](images/blender-render-bottom-1.png)
+
+If the sphere looks too big, resize it again by pressing <kbd>S</kbd> and then dragging the mouse. Render to see if the size is appropriate. For example:
+
+![Render bottom again](images/blender-render-bottom-2.png)