forked from opentx/opentx
-
Notifications
You must be signed in to change notification settings - Fork 0
OpenTX Compilation Options
Dvogonen edited this page Jan 2, 2014
·
1 revision
Here is the list of all compile options available in openTx so that you may choose the ones that you need / want.
To compile the firmware here is the syntax: make OPTION1=VALUE1 OPTION2=VALUE2...
| Option | Default | Alternatives | Description |
|---|---|---|---|
| 3POS | NO | POT1, POT2, POT3 | Enable another 3 position switch to replace a pot |
| ARITHMETIC_OVERFLOW_CHECK | NO | YES | Adds additional code to prevent arithmetic overflows |
| AUDIO | NO | YES | Better Audio feedback (needs audio TX modification) |
| AUTOSOURCE | NO | YES | Sources automatic selection |
| AUTOSWITCH | NO | YES | In model setup menus automatically set switch by moving some of them |
| BATTGRAPH | NO | YES | TX battery graph on main screen |
| BLUETOOTH | NO | YES | When sky9x board used: Bluetooth support added |
| BOLD | YES | NO | In setup menu will be bold active FPs, DR/Expos, Mixes and Switches |
| CORRECT_NEGATIVE_VALUES | YES | NO | Corrects different rounding for negative values. Instead of -99.9 you see -100.0, but uses more flash |
| CURVES | YES | NO | Curves support |
| DBLKEYS | NO | YES | Double key press [invert, +/UP max, [min, UP/DOWN reset to default) |
| DEBUG | NO | YES | Activates debug mode |
| DEFAULT_MODE | NO | 1, 2, 3, 4 | Default TX mode |
| DSM2 | NO | SERIAL, PPM | DSM2 protocol |
| EEPROM_PROGRESS_BAR | NO | YES | Progress bar on EEPROM writing |
| EXT | STD | FRSKY, JETI, NMEA, ARDUPILOT, MAVLINK,TELEMETREZ |
Telemetry extension (needs TX modification) |
| FAI | NO | YES, CHOICE | Enables FAI rules restrictions |
| FLIGHT_MODES | YES | NO | Flight modes support |
| FONT | STD | STD, SQT5 | Select font. The SQT5 font is heavier and looks best on the low contrast display of the Taranis |
| FRSKY_HUB | YES | NO | Frsky Hub supported (when EXT=FRSKY) |
| GAUGES | YES | NO | Telemetry screen also as GAUGES |
| GPS | YES | NO | GPS data support (saves 1.5k flash if disabled) |
| GRAPHICS | YES | NO | Graphical sliders and check boxes |
| GVARS | NO | YES | Global Variables |
| HAPTIC | NO | YES | Haptic feedback (needs haptic TX modification) |
| HELI | NO | YES | Heli support and menus |
| NAVIGATION | NO | POT1, POT2, POT3, POTS, ROTENC |
Use only POT1/2/3 in menus navigation or all POTS, or Rotary encoder |
| PCB | 9X | 9X128, 9XR, 9XR128, 9XR2561, GRUVIN9X, MEGA2560, SKY9X, TARANIS |
Stock 9X/9XR or with Atmega 128, gruvin9x, ersky9x, X9D boards |
| PCBREV | REV1 (gruvin9x) REVC (ersky9x) |
REV0, REVA, REVB | Revision of the board (ersky9x REVC/B/A or gruvin9x REV1/0) |
| PPM_CENTER_ADJUSTABLE | NO | YES | Adjustable PPM center for servos in limits menu PPM_LIMITS_SYMETRICAL |
| PPM_UNIT | PERCENT_PREC1 | PERCENT_PREC0, US | Units for PPM center in % or µs with precision 0 or 1 |
| PWM_BACKLIGHT | NO | YES | Fade IN/OUT Backlight using PWM |
| PXX | NO | YES | PXX protocol (dev in progress...) |
| RTCLOCK | YES | NO | Real time clock for gruvin9x, sky9x, x9d boards |
| SP22 | NO | YES |
SmartieParts 2.2 Backlight support |
| SPLASH | YES | NO | Splash displayed on Tx start |
| TEMPLATES | YES | NO | Templates screen enabled |
| TRANSLATIONS | EN | CZ, DE, ES, FR, IT, PL, PT, SE |
User interface language |
| TTS | same as TRANSLATIONS |
CZ, DE, ES, EN, FR, IT, PL, PT, SE, SK |
Voice language |
| TX_CADDY | NO | YES | For auto-switching between DSM2/X and Fr-Sky transmitter modules on gruvin9x board |
| UNITS | METRIC | IMPERIAL | Metric or Imperial units |
| VARIO | YES | NO | Enable variable tone telemetry vario (when EXT=FRSKY) |
| VOICE | NO | YES | Play Voice files (needs voice TX modification) |
| WS_HOW_HIGH | YES | NO | Winged Shadow How High supported (when EXT=FRSKY) |