JavaScript Interpreter

README.md

@@ -52,6 +52,7 @@ Also, [read our FAQ](https://github.com/pr3y/Bruce/wiki/FAQ)
 ### BLE
 - [X] BLE Beacon
 - [X] BLE Scan
+- [X] NRF24 Jammer
 - [X] AppleJuice
 - [X] SwiftPair
 - [X] Android Spam
@@ -62,15 +63,15 @@ Also, [read our FAQ](https://github.com/pr3y/Bruce/wiki/FAQ)
 ### RF
 - [x] Scan/Copy
 - [x] Custom SubGhz
-- [x] Spectrum - @incursiohack
-- [x] Jammer Full - @incursiohack
-- [x] Jammer Intermittent - @incursiohack
+- [x] Spectrum
+- [x] Jammer Full (sends a full squared wave into output)
+- [x] Jammer Intermittent (sends PWM signal into output)
 - [x] Config
     - [X] RF TX Pin
     - [X] RF RX Pin
     - [X] RF Module
     - [X] RF Frequency
-- [ ] Replay
+- [x] Replay
 
 ### RFID
 - [x] Read tag
@@ -104,6 +105,7 @@ Also, [read our FAQ](https://github.com/pr3y/Bruce/wiki/FAQ)
 - [x] Megalodon
 - [x] BADUsb (New features, SPIFFS and SDCard)
 - [X] Openhaystack
+- [X] JavaScript Interpreter (Credits to justinknight93)[https://github.com/justinknight93/Doolittle]
 
 ### Clock
 - [X] Clock
@@ -117,6 +119,18 @@ Also, [read our FAQ](https://github.com/pr3y/Bruce/wiki/FAQ)
 - [x] Sleep
 - [x] Restart
 
+## Specific functions per Device, the ones not mentioned here are available to all.
+| Device     | CC1101   | NRF24     | Interpreter   | FMRadio   | Mic_SPM1423   | BadUSB    | RGB Led | Speaker | LITE_MODE |
+| ---        | ---      |  ---      | ---           | ---       | ---           | ---       | ---     | ---     | ---   |
+| Cardputer  | :ok:     | :ok:      | :ok:          | :x:       | :ok:          | :ok:      | :ok:    | NS4168  | :x: |
+| StickCPlus2 | :ok:    | :ok:      | :ok:          | :ok:      | :ok:          | :x:       | :x:     | Tone    | :x: |
+| StickCPlus 1.1 | :ok: | :ok:      | :ok:          | :x:       | :ok:          | :x:       | :x:     | Tone    | :ok:  |
+| Core       | :x:      | :x:       | :x:           | :x:       | :ok:          | :x:       | :x:     | Tone    | :x: |
+| Core2      | :x:      | :x:       | :x:           | :x:       | :ok:          | :x:       | :x:     | :x:     | :x: |
+| CoreSe/SE  | :x:      | :x:       | :ok:          | :x:       | :x:           | :ok:      | :x:     | :x:     | :x: |
+
+*LITE_MODE*: TelNet, SSH, DPWO, WireGuard, BLEBacon, BLEScan, FMRadio and OpenHaystack are NOT available for M5Launcher Compatibility
+
 ## :sparkles: Why and how does it look?
 
 Bruce stems from a keen observation within the community focused on devices like Flipper Zero. While these devices offered a glimpse into the world of offensive security, there was a palpable sense that something more could be achieved without being that overpriced, particularly with the robust and modular hardware ecosystem provided by m5stack products.

interpreter.md

@@ -0,0 +1,247 @@
+## Manual for Coding in JavaScript to Bruce
+
+This secction was ported from (justinknight93/Doolittle)[https://github.com/justinknight93/Doolittle], who made a very nice job with its JavaScript interpreter
+
+Some changes were made and some new functions were added, and more are to be add.
+
+Bellow you can find some of the 
+
+
+## API Reference for Native Functions Accessible from JS
+
+### `load(script: string)`
+
+**Description**: Sets the script to be executed next when the current script ends. 
+
+**Parameters**:
+- `script` (string): The JavaScript code as a string to be loaded.
+
+**Returns**: `void`
+
+---
+
+### `print(message: string)`
+
+**Description**: Prints the given message to the Serial monitor.
+
+**Parameters**:
+- `message` (string): The message to print.
+
+**Returns**: `void`
+
+---
+
+### `now()`
+
+**Description**: Returns the current time in milliseconds since the epoch.
+
+**Returns**: `number`: The current timestamp in milliseconds.
+
+---
+
+### `delay(ms: number)`
+
+**Description**: Pauses execution for the specified number of milliseconds.
+
+**Parameters**:
+- `ms` (number): The number of milliseconds to delay.
+
+**Returns**: `void`
+
+---
+
+### `digitalWrite(pin: number, value: boolean)`
+
+**Description**: Sets the digital value (HIGH or LOW) for a specified pin.
+
+**Parameters**:
+- `pin` (number): The pin number.
+- `value` (boolean): The value to write (true for HIGH, false for LOW).
+
+**Returns**: `void`
+
+---
+
+### `pinMode(pin: number, mode: number)`
+
+**Description**: Configures the specified pin to behave as an input or an output.
+
+**Parameters**:
+- `pin` (number): The pin number.
+- `mode` (number): The mode to set (INPUT, OUTPUT, etc.).
+
+**Returns**: `void`
+
+---
+## Get some board information
+### `getBattery`
+**Description**: Get and integer from 0 to 100 relative to the battery level.
+
+**Returns**: `number`: 0-100 battery level.
+
+---
+### `getBoard`
+**Description**: Get and integer from 0 to 100 relative to the battery level.
+
+**Returns**: `string[]`: "StickCPlus", "StickCPlus2", "Cardputer", "Core2", "Core", "CoreS3/SE".
+
+---
+## WiFi functions
+### `wifiConnect`
+**Description**: Open Bruce WiFi connection menu.
+
+---
+### `wifiDisconnect`
+**Description**: Disconnect Wifi.
+
+---
+### `httpGet(url: string, headers: string[])`
+
+**Description**: Performs an HTTP GET request to the specified URL. Optionally includes headers.
+
+**Parameters**:
+- `url` (string): The URL to send the GET request to.
+- `headers` (string[]): An array of headers to include in the request. Headers should be provided as key-value pairs in the array. Example: `[
+    "Content-Type", "application/json",
+    "Authorization", "Bearer your_token_here",
+    "Accept", "application/json"
+]`
+
+**Returns**: `object`: An object with two properties:
+  - `response` (number): The HTTP response code.
+  - `body` (string): The response body.
+
+---
+
+## TFT Display Functions
+
+### `color(r: number, g: number, b: number)`
+
+**Description**: Creates a color from the given RGB values.
+
+**Parameters**:
+- `r` (number): The red component (0-255).
+- `g` (number): The green component (0-255).
+- `b` (number): The blue component (0-255).
+
+**Returns**: `number`: The color value in 16-bit RGB format.
+
+---
+
+### `setTextColor(color: number)`
+
+**Description**: Sets the text color for drawing operations.
+
+**Parameters**:
+- `color` (number): The color value in 16-bit RGB format.
+
+**Returns**: `void`
+
+---
+
+### `setTextSize(size: number)`
+
+**Description**: Sets the text size for drawing operations.
+
+**Parameters**:
+- `size` (number): The text size multiplier.
+
+**Returns**: `void`
+
+---
+
+### `drawRect(x: number, y: number, width: number, height: number, color: number)`
+
+**Description**: Draws a rectangle with the specified parameters.
+
+**Parameters**:
+- `x` (number): The x-coordinate of the top-left corner.
+- `y` (number): The y-coordinate of the top-left corner.
+- `width` (number): The width of the rectangle.
+- `height` (number): The height of the rectangle.
+- `color` (number): The color value in 16-bit RGB format.
+
+**Returns**: `void`
+
+---
+
+### `drawFillRect(x: number, y: number, width: number, height: number, color: number)`
+
+**Description**: Draws a filled rectangle with the specified parameters.
+
+**Parameters**:
+- `x` (number): The x-coordinate of the top-left corner.
+- `y` (number): The y-coordinate of the top-left corner.
+- `width` (number): The width of the rectangle.
+- `height` (number): The height of the rectangle.
+- `color` (number): The color value in 16-bit RGB format.
+
+**Returns**: `void`
+
+---
+
+### `drawString(text: string, x: number, y: number)`
+
+**Description**: Draws the specified text at the given coordinates.
+
+**Parameters**:
+- `text` (string): The text to draw.
+- `x` (number): The x-coordinate where the text starts.
+- `y` (number): The y-coordinate where the text starts.
+
+**Returns**: `void`
+
+---
+
+### `width()`
+
+**Description**: Returns the width of the display.
+
+**Returns**: `number`: The width of the display in pixels.
+
+---
+
+### `height()`
+
+**Description**: Returns the height of the display.
+
+**Returns**: `number`: The height of the display in pixels.
+
+---
+
+## Keyboard Inputs
+
+### `getPrevPress()`
+**Description**: Return the current state of 'Previous' button;
+
+**Returns**: `boolean`: Returns `true` if pressed and `false` if not pressed
+
+---
+### `getSelPress()`
+**Description**: Return the current state of 'Select' button;
+
+**Returns**: `boolean`: Returns `true` if pressed and `false` if not pressed
+
+---
+### `getNextPress()`
+**Description**: Return the current state of 'Next' button;
+
+**Returns**: `boolean`: Returns `true` if pressed and `false` if not pressed
+
+---
+### `getKeysPressed()`
+**Restriction**: Works only in Cardputer
+
+**Description**: Returns the current state of the keys pressed on the M5Cardputer.
+
+**Returns**: `string[]`: An array of strings representing the pressed keys. Possible values include "Delete", "Enter", "Alt", "Tab", "Function", "Option", or the actual key character.
+
+---
+## ToDo
+### Send IR command
+
+### Send RF command
+
+### Send BadUSB payload
+
+###