Conflict data resolution enhancement during data import GA

tidb-lightning/tidb-lightning-configuration.md

@@ -125,20 +125,24 @@ driver = "file"
 # keep-after-success = false
 
 [conflict]
-# Starting from v7.3.0, a new version of strategy is introduced to handle conflicting data. The default value is "". Starting from v8.0.0, TiDB Lightning optimizes the conflict strategy for both physical and logical import modes (experimental).
+# Starting from v7.3.0, a new version of strategy is introduced to handle conflicting data. The default value is "". Starting from v8.0.0, TiDB Lightning optimizes the conflict strategy for both physical and logical import modes.
 # - "": in the physical import mode, TiDB Lightning does not detect or handle conflicting data. If the source file contains conflicting primary or unique key records, the subsequent step reports an error. In the logical import mode, TiDB Lightning converts the "" strategy to the "error" strategy for processing.
 # - "error": when detecting conflicting primary or unique key records in the imported data, TiDB Lightning terminates the import and reports an error.
 # - "replace": when encountering conflicting primary or unique key records, TiDB Lightning retains the latest data and overwrites the old data.
 #              The conflicting data are recorded in the `lightning_task_info.conflict_error_v2` table (recording conflicting data detected by post-import conflict detection in the physical import mode) and the `conflict_records` table (recording conflicting data detected by preprocess conflict detection in both logical and physical import modes) of the target TiDB cluster.
+#              If you set `conflict.strategy = "replace"` in physical import mode, the conflicting data can be checked in the `lightning_task_info.conflict_view` view.
 #              You can manually insert the correct records into the target table based on your application requirements. Note that the target TiKV must be v5.2.0 or later versions.
 # - "ignore": when encountering conflicting primary or unique key records, TiDB Lightning retains the old data and ignores the new data. This option can only be used in the logical import mode.
 strategy = ""
-# Controls whether to enable preprocess conflict detection, which checks conflicts in data before importing it to TiDB. In scenarios where the ratio of conflict records is greater than or equal to 1%, it is recommended to enable preprocess conflict detection for better performance in conflict detection. In other scenarios, it is recommended to disable it. The default value is false, indicating that TiDB Lightning only checks conflicts after the import. If you set it to true, TiDB Lightning checks conflicts both before and after the import. This parameter is experimental, and it can be used only in the physical import mode.
+# Controls whether to enable preprocess conflict detection, which checks conflicts in data before importing it to TiDB. The default value is false, indicating that TiDB Lightning only checks conflicts after the import. If you set it to true, TiDB Lightning checks conflicts both before and after the import. This parameter can be used only in the physical import mode. In scenarios where the number of conflict records is greater than 1,000,000, it is recommended to set `precheck-conflict-before-import = true` for better performance in conflict detection. In other scenarios, it is recommended to disable it.
 # precheck-conflict-before-import = false
-# Controls the maximum number of conflict errors that can be handled when the strategy is "replace" or "ignore". You can set it only when the strategy is "replace" or "ignore". The default value is 9223372036854775807, which means that almost all errors are tolerant. 
-# threshold = 9223372036854775807
-# Controls the maximum number of records in the `conflict_records` table. The default value is 100. In the physical import mode, if the strategy is "replace", the conflict records that are overwritten are recorded. In the logical import mode, if the strategy is "ignore", the conflict records that are ignored are recorded; if the strategy is "replace", the conflict records are not recorded.
-# max-record-rows = 100
+# Controls the maximum number of conflict errors that can be handled when strategy is "replace" or "ignore". You can set it only when the strategy is "replace" or "ignore". The default value is 10000. If you set a value larger than 10000, the import process might experience performance degradation.
+# threshold = 10000
+# Controls the maximum number of records in the `conflict_records` table. The default value is 10000. 
+# Starting from v8.1.0, there is no need to configure `max-record-rows` manually, because TiDB Lightning automatically assigns the value of `max-record-rows` with the value of `threshold`, regardless of the user input. `max-record-rows` will be deprecated in a future release.
+# In the physical import mode, if the strategy is "replace", the conflict records that are overwritten are recorded.
+# In the logical import mode, if the strategy is "ignore", the conflict records that are ignored are recorded; if the strategy is "replace", the conflict records are not recorded.
+# max-record-rows = 10000
 
 [tikv-importer]
 # "local": Physical import mode, used by default. It applies to large dataset import,

tidb-lightning/tidb-lightning-error-resolution.md

@@ -47,7 +47,7 @@ The following errors are always fatal, and cannot be skipped by changing `lightn
 
 ## Conflict errors
 
-You can use the [`conflict.threshold`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task) configuration item to increase the tolerance of errors related to data conflict. If this configuration item is set to *N*, TiDB Lightning allows and skips up to *N* conflict errors from the data source before it exits. The default value is `9223372036854775807`, which means that almost all errors are tolerant.
+You can use the [`conflict.threshold`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task) configuration item to increase the tolerance of errors related to data conflict. If this configuration item is set to *N*, TiDB Lightning allows and skips up to *N* conflict errors from the data source before it exits. The default value is `10000`, which means that 10000 errors are tolerant.
 
 These errors are recorded in a table. After the import is completed, you can view the errors in the database and process them manually. For more information, see [Error Report](#error-report)
 

tidb-lightning/tidb-lightning-logical-import-mode-usage.md

@@ -56,9 +56,9 @@ Conflicting data refers to two or more records with the same data in the PK or U
 | `"error"` | Terminating the import when conflicting data is detected. | `INSERT INTO ...` |
 |  `""`  | Converted to `"error"`, which means terminating the import when conflicting data is detected.  |  None   |
 
-When the strategy is `"error"`, errors caused by conflicting data directly terminates the import task. When the strategy is `"replace"` or `"ignore"`, you can control the maximum tolerant conflicts by configuring [`conflict.threshold`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task). The default value is `9223372036854775807`, which means that almost all errors are tolerant.
+When the strategy is `"error"`, errors caused by conflicting data directly terminate the import task. When the strategy is `"replace"` or `"ignore"`, you can control the maximum tolerant conflicts by configuring [`conflict.threshold`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task). The default value is `10000`, which means that 10000 errors are tolerant.
 
-When the strategy is `"ignore"`, conflicting data is recorded in the downstream `conflict_records` table. For further details, see [Error report](/tidb-lightning/tidb-lightning-error-resolution.md#error-report). In this case, you can limit the records by configuring [`conflict.max-record-rows`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task), and conflicting data that exceeds the limit is skipped and not recorded. The default value is `100`.
+When the strategy is `"ignore"`, conflicting data is recorded in the downstream `conflict_records` table. For further details, see [Error report](/tidb-lightning/tidb-lightning-error-resolution.md#error-report). Before v8.1.0, you can limit the records by configuring [`conflict.max-record-rows`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task), and conflicting data that exceeds the limit is skipped and not recorded. Starting from v8.1.0, you need to configure [`conflict.threshold`](/tidb-lightning/tidb-lightning-configuration.md#tidb-lightning-task) instead, because TiDB Lightning automatically assigns the value of `max-record-rows` with the value of `threshold`, regardless of the user input.
 
 ## Performance tuning
 

tidb-lightning/tidb-lightning-physical-import-mode-usage.md

@@ -30,17 +30,19 @@ check-requirements = true
 data-source-dir = "/data/my_database"
 
 [conflict]
-# Starting from v7.3.0, a new version of strategy is introduced to handle conflicting data. The default value is "". Starting from v8.0.0, TiDB Lightning optimizes the conflict strategy for both physical and logical import modes (experimental).
+# Starting from v7.3.0, a new version of strategy is introduced to handle conflicting data. The default value is "". Starting from v8.0.0, TiDB Lightning optimizes the conflict strategy for both physical and logical import modes.
 # - "": TiDB Lightning does not detect or handle conflicting data. If the source file contains conflicting primary or unique key records, the subsequent step reports an error.
 # - "error": when detecting conflicting primary or unique key records in the imported data, TiDB Lightning terminates the import and reports an error.
 # - "replace": when encountering conflicting primary or unique key records, TiDB Lightning retains the latest data and overwrites the old data.
 #              The conflicting data are recorded in the `lightning_task_info.conflict_error_v2` table (recording conflicting data detected by post-import conflict detection) and the `conflict_records` table (recording conflicting data detected by preprocess conflict detection) of the target TiDB cluster.
+#              If you set `conflict.strategy = "replace"` in physical import mode, the conflicting data can be checked in the `lightning_task_info.conflict_view` view.
 #              You can manually insert the correct records into the target table based on your application requirements. Note that the target TiKV must be v5.2.0 or later versions.
 strategy = ""
-# Controls whether to enable preprocess conflict detection, which checks conflicts in data before importing it to TiDB. In scenarios where the ratio of conflict records is greater than or equal to 1%, it is recommended to enable preprocess conflict detection for better performance in conflict detection. In other scenarios, it is recommended to disable it. The default value is false, indicating that TiDB Lightning only checks conflicts after the import. If you set it to true, TiDB Lightning checks conflicts both before and after the import. This parameter is experimental.
+# Controls whether to enable preprocess conflict detection, which checks conflicts in data before importing it to TiDB. The default value is false, indicating that TiDB Lightning only checks conflicts after the import. If you set it to true, TiDB Lightning checks conflicts both before and after the import. This parameter can be used only in the physical import mode. In scenarios where the number of conflict records is greater than 1,000,000, it is recommended to set `precheck-conflict-before-import = true` for better performance in conflict detection. In other scenarios, it is recommended to disable it.
 # precheck-conflict-before-import = false
-# threshold = 9223372036854775807
-# max-record-rows = 100
+# threshold = 10000
+# Starting from v8.1.0, there is no need to configure `max-record-rows` manually, because TiDB Lightning automatically assigns the value of `max-record-rows` with the value of `threshold`, regardless of the user input. `max-record-rows` will be deprecated in a future release.
+# max-record-rows = 10000
 
 [tikv-importer]
 # Import mode. "local" means using the physical import mode.