Move information from Wiki to Readme

README.md

@@ -27,7 +27,7 @@ curl -sSL https://install.padd.sh -o padd.sh
 sudo chmod +x padd.sh
 ```
 
-- Set PADD to auto run by adding the following to the end of `~/.bashrc`:
+- Set PADD to auto run on the PiTFT screen by adding the following to the end of `~/.bashrc`:
 
 ```bash
 # Run PADD
@@ -49,6 +49,18 @@ cd ~ ; echo "if [ \"\$TERM\" == \"linux\" ] ; then\n  while :\n  do\n    ./padd.
 
 - Reboot your Pi-Hole by running `sudo reboot`. PADD should now run when your Pi-Hole has completed booting.
 
+### (Optional) Put the PiTFT Display to Sleep at Night
+*If you don't want your PiTFT on all night when you are asleep, you can put it to sleep! (Note: __these instructions only apply to a PiTFT__.)*
+
+- To do so, edit cron as root (`sudo crontab -e`) and add the following:
+```bash
+# PiTFT+ SLEEPY TIME
+# Turn off the PiTFT+ at midnight
+00 00 * * * sh -c 'echo "0" > /sys/class/backlight/soc\:backlight/brightness'
+# Turn on the PiTFT+ at 8:00 am
+00 08 * * * sh -c 'echo "1" > /sys/class/backlight/soc\:backlight/brightness'
+```
+
 ## Updating PADD
 - Simply run
 
@@ -72,3 +84,37 @@ If you're running Pi-hole in the official Docker Container, `padd.sh` is pre-ins
 ```bash
 docker exec -it <container_name> padd [padd_options]
 ```
+
+## Sizes 
+PADD will display on screens that anywhere from 20x10 characters to over 80x26 characters.
+
+As your screen gets smaller, you’ll be presented with less information… however, you’ll always get the most important details:
+- The status of your Pi-hole (is it online, in need of an update?),
+- How many ads have been blocked,
+- Your hostname and IP, and
+- Your CPU’s current load.
+
+It will also run in the following modes (shown further below):
+- Pico: 20x10 characters
+- Nano: 24x12 characters
+- Micro: 30x16 characters
+- Mini: 40x18 characters
+- Tiny: 53x20 characters
+- Slim: 60x21 characters
+- Regular: 60x22 characters (takes up the entire screen on a 3.5" Adafruit PiTFT using the Terminal font at 8x14.)
+- Mega: 80x26 characters
+
+### Sizing Your PADD
+How PADD will display on your screen depends on the size of the screen in *characters*, not *pixels*! PADD doesn’t care if it is running on a 5k Retina display on your $5,000 iMac Pro or on a $5 display you bought on eBay.
+
+If you want to change how PADD displays on a small display attached to your Raspberry Pi, use
+```bash
+sudo dpkg-reconfigure console-setup
+```
+to configure your font settings to an ideal size for you.
+
+If you want to change how PADD displays through a terminal emulator (PuTTY, Terminal.app, iTerm2, etc.), resize your window or play with font sizes in your app of choice.
+
+### The Sizes
+
+![PADD Sizes GIF](https://github.com/pi-hole/graphics/blob/master/PADD/PADDsizes.gif)