Update gps.conf

Signed-off-by: Shekhawat2 <[email protected]>

gps/gps.conf

@@ -1,15 +1,15 @@
 #Uncommenting these urls would only enable
 #the power up auto injection and force injection(test case).
-#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
-#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
-#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
+XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin
+XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin
+XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin
 
 #Version check for XTRA
 #DISABLE = 0
 #AUTO    = 1
 #XTRA2   = 2
 #XTRA3   = 3
-XTRA_VERSION_CHECK=0
+XTRA_VERSION_CHECK=1
 
 # Error Estimate
 # _SET = 1
@@ -25,10 +25,10 @@ XTRA_CA_PATH=/system/etc/security/cacerts
 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
 #               4 - Debug, 5 - Verbose
 # If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 2
+DEBUG_LEVEL = 3
 
 # Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=0
+INTERMEDIATE_POS=1
 
 # Below bit mask configures how GPS functionalities
 # should be locked when user turns off GPS on Settings
@@ -38,22 +38,22 @@ INTERMEDIATE_POS=0
 #GPS_LOCK = 0
 
 # supl version 1.0
-SUPL_VER=0x10000
+SUPL_VER=0x20000
 
 # Emergency SUPL, 1=enable, 0=disable
 SUPL_ES=0
 
 #Choose PDN for Emergency SUPL
 #1 - Use emergency PDN
 #0 - Use regular SUPL PDN for Emergency SUPL
-USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
+USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
 
 #SUPL_MODE is a bit mask set in config.xml per carrier by default.
 #If it is uncommented here, this value will overwrite the value from
 #config.xml.
 #MSA=0X2
 #MSB=0X1
-#SUPL_MODE=
+SUPL_MODE=3
 
 # GPS Capabilities bit mask
 # SCHEDULING = 0x01
@@ -66,15 +66,15 @@ CAPABILITIES=0x37
 
 # Accuracy threshold for intermediate positions
 # less accurate positions are ignored, 0 for passing all positions
-# ACCURACY_THRES=5000
+ACCURACY_THRES=70
 
 ################################
 ##### AGPS server settings #####
 ################################
 
 # FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
-# SUPL_PORT=1234
+SUPL_HOST=supl.google.com
+SUPL_PORT=7276
 
 # FOR C2K PDE SUPPORT, set the following
 # C2K_HOST=c2k.pde.com or IP
@@ -95,7 +95,7 @@ CAPABILITIES=0x37
 # 1: Enable LPP_User_Plane on LTE
 # 2: Enable LPP_Control_Plane
 # 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 2
+LPP_PROFILE = 0
 
 ################################
 # EXTRA SETTINGS
@@ -126,3 +126,60 @@ LPPE_CP_TECHNOLOGY = 0
 # 0x1: DBH for LPPe UP
 # 0x2: WLAN AP Measurements for LPPe UP
 LPPE_UP_TECHNOLOGY = 0
+
+##################################################
+# AGPS_CONFIG_INJECT
+##################################################
+# enable/disable injection of AGPS configurations:
+#     SUPL_VER
+#     SUPL_HOST
+#     SUPL_PORT
+#     C2K_HOST
+#     C2K_PORT
+#     LPP_PROFILE
+#     A_GLONASS_POS_PROTOCOL_SELECT
+# 0: disable
+# 1: enable
+AGPS_CONFIG_INJECT = 1
+# AP Coarse Timestamp Uncertainty
+##################################################
+# default : 10
+# or as per clock uncertainty of product
+AP_TIMESTAMP_UNCERTAINTY = 10
+
+#####################################
+# GNSS PPS settings
+#####################################
+#AP DR engine availability status
+# 0 : NO AP DR (default)
+# 1 : AP DR enabled
+#EXTERNAL_DR_ENABLED = 0
+
+#####################################
+#DR_SYNC Pulse Availability
+#####################################
+# 0 : DR_SYNC pulse not available (default)
+# 1 : DR_SYNC pulse available
+DR_SYNC_ENABLED = 0
+
+#####################################
+#PPS Device name
+#####################################
+PPS_DEVICENAME = /dev/pps0
+
+#####################################
+#AP Clock Accuracy
+#####################################
+AP_CLOCK_PPM = 100
+
+#####################################
+#MAX ms difference to detect missing pulse
+#####################################
+MISSING_PULSE_TIME_DELTA = 900
+
+#####################################
+#Propagation time uncertainty
+#####################################
+PROPAGATION_TIME_UNCERTAINTY = 1
+XTRA_TEST_ENABLED = 1
+XTRA_THROTTLE_ENABLED = 0