Skip to content

openbmc/openpower-occ-control

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

OpenPOWER OCC Control Service

This service will handle communications to the On-Chip Controller (OCC) on Power processors. The OCC provides processor and memory temperatures, power readings, power cap support, system power mode support, and idle power saver support. OCC Control will be interfacing with the OCC to collect the temperatures and power readings, updating the system power mode, setting power caps, and idle power save parameters.

The service is started automatically when the BMC is started.

Build Project

This project can be built with meson. The typical meson workflow is: meson builddir && ninja -C builddir.

Server

The server will start automatically after BMC is powered on.

Server status: systemctl status org.open_power.OCC.Control.service

To restart the service: systemctl restart org.open_power.OCC.Control.service

Configuration

Service files are located in service_files subdirectory.

References

Power10

IBM EnergyScale for Power10 Processor-Based Systems whitepaper: https://www.ibm.com/downloads/cas/E7RL9N4E

OCC Firmware Interface Spec for Power10: https://github.com/open-power/docs/blob/P10/occ/OCC_P10_FW_Interfaces_v1_17.pdf

OCC Firmware: https://github.com/open-power/occ/tree/master-p10

Power9

IBM EnergyScale for POWER9 Processor-Based Systems: https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?htmlfid=49019149USEN&

OCC Firmware Interface Spec for POWER9: https://github.com/open-power/docs/blob/P9/occ/OCC_P9_FW_Interfaces.pdf

About

Control application for the OpenPOWER On-Chip-Controller

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages