Update 01-Ultracortex-Mark-III-Nova-Revised.md

headware/01-Ultracortex-Mark-III-Nova-Revised.md

@@ -175,6 +175,15 @@ We use small stainless steel screws and hex nuts to fasten the FRI electrodes (l
 	* Layer Height: 0.2mm
 	* Number of Shells: 3
 	* Speed while extruding: 50-70% (slow it down if possible; these parts are detailed)
+* QUAD_STAR
+ 	* Material: [NinjaFlex](https://ninjatek.com/products/filaments/ninjaflex/) or [SemiFlex](https://ninjatek.com/products/filaments/semiflex/)
+	* Supports: NO
+	* Raft: NO
+	* Infill: 10%
+	* Layer Height: 0.27mm (or 0.3mm)
+	* Number of Shells: 2
+	* Speed while extruding: 30-50% (slow it down if possible; these parts are detailed)
+	* Print Temperature: 230-250C (we get more consistant prints when printing at higher temperatures, but it gets stringy)
 
 ## RECOMMENDED ASSEMBLY TOOLS
 
@@ -405,6 +414,8 @@ To add the QUADSTAR extensions to your Supernova, use the following parts:
 
 **3D Printed Parts**
 
+**Note:** the QUAD_STAR should be printed in a stretchy filament (like NinjaFlex or SemiFlex), as listed above in the Suggested Print Settings section.
+
 * [Quadstar](https://github.com/OpenBCI/Ultracortex/blob/master/Mark_III_Nova/STLs/MECH_PARTS/QUADSTAR.stl) (**8X**) -- [.STL download link](https://github.com/OpenBCI/Ultracortex/raw/master/Mark_III_Nova/STLs/MECH_PARTS/QUADSTAR.stl)
 * [Octaring](https://github.com/OpenBCI/Ultracortex/blob/master/Mark_III_Nova/STLs/MECH_PARTS/OCTARING.stl) (**8X**) -- [.STL download link](https://github.com/OpenBCI/Ultracortex/raw/master/Mark_III_Nova/STLs/MECH_PARTS/OCTANUT.stl)