Update readme for realvr

README.md

@@ -29,7 +29,7 @@ Checkout the [Compatibility List](https://github.com/oneup03/VRto3D/wiki/Compati
 - Reload the profile settings (ones with a `+`) from `default_config.json` with `Ctrl + F10` A beep will indicate success
 - Toggle locking the SteamVR Headset Window to the foreground with `Ctrl + F8`
 - Toggle HMD Height between 0.1m and configured `hmd_height` using `Ctrl + F9`. This is useful for games that force a calibration on the "floor"
-- Check the [Controls](#controls) section and the Configuration table below to setup HMD camera controls for VR games (check the compatibility list to see if they are needed) and Luke Ross mods (not for other mods)
+- Check the [Controls](#controls) section and the Configuration table below to setup HMD camera controls for VR games (check the compatibility list to see if they are needed)
 - Check the [User Settings](#user-settings) section for instructions on setting up your own Depth and Convergence presets and also reference the Configuration table below
 - When Pitch/Yaw emulation is enabled, you can adjust the ctrl_sensitivity with `Ctrl -` and `Ctrl +` and the pitch_radius with `Ctrl [` and `Ctrl ]`
 
@@ -67,7 +67,7 @@ Checkout the [Compatibility List](https://github.com/oneup03/VRto3D/wiki/Compati
 | `pose_reset_key` +  | `string`| The Virtual-Key Code to reset the HMD position and orientation                              | `"VK_NUMPAD7"` |
 | `ctrl_toggle_key` + | `string`| The Virtual-Key Code to toggle Pitch and Yaw emulation on/off when they are enabled         | `"XINPUT_GAMEPAD_RIGHT_THUMB"` |
 | `ctrl_toggle_type` +| `string`| The ctrl_toggle_key's behavior ("toggle" "hold")                                            | `"toggle"`     |
-| `pitch_radius` +    | `float` | Radius of curvature for the HMD to pitch along. Useful in 3rd person VR and RealVR games    | `0.0`          |
+| `pitch_radius` +    | `float` | Radius of curvature for the HMD to pitch along. Useful in 3rd person VR games               | `0.0`          |
 | `ctrl_deadzone` +   | `float` | Controller Deadzone when using pitch or yaw emulation                                       | `0.05`         |
 | `ctrl_sensitivity` +| `float` | Controller Sensitivity when using pitch or yaw emulation                                    | `1.0`          |
 | `user_load_key` +   | `string`| The Virtual-Key Code to load user setting # (replace # with integer number)                 | `"VK_NUMPAD1"` |