Skip to content

Commit

Permalink
docs: Remove legacy EPID instructions
Browse files Browse the repository at this point in the history
  • Loading branch information
@amela
amela committed Aug 29, 2024
1 parent e763eac commit 33ffff0
Showing 1 changed file with 7 additions and 127 deletions.
134 changes: 7 additions & 127 deletions docs/node/run-your-node/prerequisites/set-up-trusted-execution-environment-tee.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -36,23 +36,6 @@ Due to additional sanity checks within runtime enclaves, you should ensure that
the node's local clock is synchronized (e.g. using NTP). If it is off by more
than half a second you may experience unexpected runtime aborts.

## Install SGX Linux Driver

In case you are running Linux kernel version 5.11 or higher, the required SGX
driver is already included and no additional installation is needed. We
recommend you to update your kernel. If unable, you need to manually
install a compatible SGX driver.

### Verification

Make sure that one of the following SGX devices exists (the exact device name
depends on which driver is being used):

* `/dev/sgx_enclave` (since Linux kernel 5.11)
* `/dev/sgx/enclave` (legacy driver)
* `/dev/sgx` (legacy driver)
* `/dev/isgx` (legacy driver)

## Ensure Proper SGX Device Permissions

Make sure that the user that is running the Oasis Node binary has access to the
Expand Down Expand Up @@ -84,10 +67,8 @@ Architectural Enclaves is through **Application Enclave Service Manager
can facilitate various SGX services such as launch approval, remote attestation
quote signing, etc.

Oasis node supports the (legacy) EPID and (newer) DCAP attestation methods.
Following instructions differ depending on the attestation method used.

To see if your system supports DCAP attestation run the following:
Oasis node requires the use of DCAP attestation. To see if your system supports
it, run the following:

```bash
cpuid -1 | grep "SGX"
Expand All @@ -98,8 +79,6 @@ and look for the following line:
SGX_LC: SGX launch config supported = true
```
If your system doesn't support the "SGX_LC: SGX launch config supported", skip to the [EPID attestation](#legacy-epid-attestation) section.
## DCAP Attestation
### Ubuntu 22.04
Expand Down Expand Up @@ -213,22 +192,6 @@ docker run \
ghcr.io/oasisprotocol/aesmd-dcap:master
```

:::tip

Make sure to use the correct SGX devices based on your [SGX driver](set-up-trusted-execution-environment-tee.md#verification).
The example above assumes the use of the newer driver which uses two devices.
For the legacy driver you need to specify `--device /dev/isgx` instead.

:::

:::tip

Make sure to use the correct docker image based on your attestation method.
For DCAP use the `ghcr.io/oasisprotocol/aesmd-dcap:master` and for EPID use the
`ghcr.io/oasisprotocol/aesmd-epid:master` image.

:::

By default, the Intel Quote Provider in the docker container is configured to use the Intel PCS endpoint.
To override the Intel Quote Provider configuration within the container mount your own custom configuration using
the `volume` flag.
Expand Down Expand Up @@ -278,17 +241,9 @@ please follow [the vSphere guide].
## Migrate from EPID Attestation to DCAP Attestation

EPID attestation will be discontinued in 2025 and will no longer be available on
any processors. All nodes using EPID attestation should migrate to DCAP
any processors. All nodes using EPID attestation must migrate to DCAP
attestation.

:::info

Compute node operators, please hold for further instructions. We will coordinate
the migration in phases to ensure that during the migration the network remains
operational.

:::

For transitioning to the DCAP attestation, follow these steps:
1. See if your system [supports DCAP attestation]. If your hardware does not
support DCAP attestation, you'll need to migrate your node to newer hardware.
Expand Down Expand Up @@ -317,79 +272,6 @@ support DCAP attestation, you'll need to migrate your node to newer hardware.
[Configure the Quote Provider]: #configuring-the-quote-provider
[attestation tool]: #oasis-attestation-tool

## (Legacy) EPID Attestation

:::tip

Skip this section if you already configured AESM with DCAP Attestation.

:::

:::info

EPID attestation support has been discontinued in newer processors (Intel Xeon 3rd generation onwards).
Please refer to the [DCAP attestation](#dcap-attestation) section on newer systems.

:::

### Ubuntu 22.04

A convenient way to install the AESM service on Ubuntu 22.04 systems
is to use the Intel's [official Intel SGX APT repository](https://download.01.org/intel-sgx/sgx_repo/).
First add Intel SGX APT repository to your system:
```bash
curl -fsSL https://download.01.org/intel-sgx/sgx_repo/ubuntu/intel-sgx-deb.key | sudo gpg --dearmor -o /usr/share/keyrings/intel-sgx-deb.gpg
echo "deb [arch=amd64 signed-by=/usr/share/keyrings/intel-sgx-deb.gpg] https://download.01.org/intel-sgx/sgx_repo/ubuntu $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/intel-sgx.list > /dev/null
```
And then install the `sgx-aesm-service`, `libsgx-aesm-launch-plugin` and
`libsgx-aesm-epid-plugin` packages:
```bash
sudo apt update
sudo apt install sgx-aesm-service libsgx-aesm-launch-plugin libsgx-aesm-epid-plugin
```
The AESM service should be up and running. To confirm that, use:
```bash
sudo systemctl status aesmd.service
```
### Docker-enabled System
An easy way to install and run the AESM service on a [Docker](https://docs.docker.com/engine/)-enabled
system is to use [our AESM container image](https://github.com/oasisprotocol/oasis-core/pkgs/container/aesmd).
Executing the following command should (always) pull the latest version of our
AESM Docker container, map the SGX devices and `/var/run/aesmd` directory and
ensure AESM is running in the background (also automatically started on boot):
```bash
docker run \
--pull always \
--detach \
--restart always \
--device /dev/sgx_enclave \
--device /dev/sgx_provision \
--volume /var/run/aesmd:/var/run/aesmd \
--name aesmd \
ghcr.io/oasisprotocol/aesmd-epid:master
```
:::tip
Make sure to use the correct devices based on your [kernel version](set-up-trusted-execution-environment-tee.md#verification).
The example above assumes the use of the newer driver which uses two devices.
For the legacy driver you need to specify `--device /dev/isgx` instead.
Make sure to use the correct docker image based on your attestation method.
For DCAP use the `ghcr.io/oasisprotocol/aesmd-dcap:master` and for EPID use the
`ghcr.io/oasisprotocol/aesmd-epid:master` image.
:::
## Check SGX Setup

In order to make sure that your SGX setup is working, you can use the
Expand Down Expand Up @@ -531,9 +413,8 @@ debug: cause: Connection refused (os error 111)
More information: https://edp.fortanix.com/docs/installation/help/#aesm-service
```

Ensure you have completed all the necessary installation steps outlined in either
[DCAP Attestation](#dcap-attestation) or [EPID attestation](#legacy-epid-attestation)
sections.
Ensure you have completed all the necessary installation steps outlined in
[DCAP Attestation](#dcap-attestation) section.

### AESM: error 30

Expand All @@ -543,9 +424,8 @@ If you are encountering the following error message in your node's logs:
failed to initialize TEE: error while getting quote info from AESMD: aesm: error 30
```
Ensure you have all required SGX driver libraries installed as listed in either
[DCAP Attestation](#dcap-attestation) or [EPID attestation](#legacy-epid-attestation)
sections.
Ensure you have all required SGX driver libraries installed as listed in
[DCAP Attestation](#dcap-attestation) section.
### Permission Denied When Accessing SGX Kernel Device
Expand Down

0 comments on commit 33ffff0

Please sign in to comment.