Skip to content
/ lookout Public

Lookout is a unit testing framework for Ruby that puts your results in focus

License

Unknown, Unknown licenses found

Licenses found

Unknown
COPYING
Unknown
COPYING.LESSER
Notifications You must be signed in to change notification settings

now/lookout

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

                                Lookout

  Lookout is a unit testing framework for Ruby¹ that puts your results in
  focus. Tests (expectations) are written as follows

    expect 2 do
      1 + 1
    end

    expect ArgumentError do
      Integer('1 + 1')
    end

    expect Array do
      [1, 2, 3].select{ |i| i % 2 == 0 }
    end

    expect [2, 4, 6] do
      [1, 2, 3].map{ |i| i * 2 }
    end

  Lookout is designed to encourage – force, even – unit testing best practices
  such as

•   Setting up only one expectation per test
•   Not setting expectations on non-public APIs
•   Test isolation

  This is done by

•   Only allowing one expectation to be set per test
•   Providing no (additional) way of accessing private state
•   Providing no setup and tear-down methods, nor a method of providing test
    helpers

  Other important points are

•   Putting the expected outcome of a test in focus with the steps of the
    calculation of the actual result only as a secondary concern
•   A focus on code readability by providing no mechanism for describing an
    expectation other than the code in the expectation itself
•   A unified syntax for setting up both state-based and behavior-based
    expectations

  The way Lookout works has been heavily influenced by expectations², by
  {Jay Fields}³.  The code base was once also heavily based on expectations,
  based at Subversion {revision 76}⁴.  A lot has happened since then and all of
  the work past that revision are due to {Nikolai Weibull}⁵.

¹ Ruby: http://ruby-lang.org/
² Expectations: http://expectations.rubyforge.org/
³ Jay Fields’s blog: http://blog.jayfields.com/
⁴ Lookout revision 76:
  https://github.com/now/lookout/commit/537bedf3e5b3eb4b31c066b3266f42964ac35ebe
⁵ Nikolai Weibull’s home page: http://disu.se/

§ Installation

    Install Lookout with

      % gem install lookout


§ Usage

    Lookout allows you to set expectations on an object’s state or behavior.
    We’ll begin by looking at state expectations and then take a look at
    expectations on behavior.

  § Expectations on State: Literals

      An expectation can be made on the result of a computation:

        expect 2 do
          1 + 1
        end

      Most objects, in fact, have their state expectations checked by invoking
      ‹#==› on the expected value with the result as its argument.

      Checking that a result is within a given range is also simple:

        expect 0.099..0.101 do
          0.4 - 0.3
        end

      Here, the more general ‹#===› is being used on the ‹Range›.

  § Regexps

      ‹Strings› of course match against ‹Strings›:

        expect 'ab' do
          'abc'[0..1]
        end

      but we can also match a ‹String› against a ‹Regexp›:

        expect %r{a substring} do
          'a string with a substring'
        end

      (Note the use of ‹%r{…}› to avoid warnings that will be generated when
      Ruby parses ‹expect /…/›.)

  § Modules

      Checking that the result includes a certain module is done by expecting the
      ‹Module›.

        expect Enumerable do
          []
        end

      This, due to the nature of Ruby, of course also works for classes (as
      they are also modules):

        expect String do
          'a string'
        end

      This doesn’t hinder us from expecting the actual ‹Module› itself:

        expect Enumerable do
          Enumerable
        end

      or the ‹Class›:

        expect String do
          String
        end

      for obvious reasons.

      As you may have figured out yourself, this is accomplished by first
      trying ‹#==› and, if it returns ‹false›, then trying ‹#===› on the
      expected ‹Module›.  This is also true of ‹Ranges› and ‹Regexps›.

  § Booleans

      Truthfulness is expected with ‹true› and ‹false›:

        expect true do
          1
        end

        expect false do
          nil
        end

      Results equaling ‹true› or ‹false› are slightly different:

        expect TrueClass do
          true
        end

        expect FalseClass do
          false
        end

      The rationale for this is that you should only care if the result of a
      computation evaluates to a value that Ruby considers to be either true or
      false, not the exact literals ‹true› or ‹false›.

  § IO

      Expecting output on an IO object is also common:

        expect output("abc\ndef\n") do |io|
          io.puts 'abc', 'def'
        end

      This can be used to capture the output of a formatter that takes an
      output object as a parameter.

  § Warnings

      Expecting warnings from code isn’t very common, but should be done:

        expect warning('this is your final one!') do
          warn 'this is your final one!'
        end

        expect warning('this is your final one!') do
          warn '%s:%d: warning: this is your final one!' % [__FILE__, __LINE__]
        end

      ‹$VERBOSE› is set to ‹true› during the execution of the block, so you
      don’t need to do so yourself.  If you have other code that depends on the
      value of $VERBOSE, that can be done with ‹#with_verbose›

        expect nil do
          with_verbose nil do
            $VERBOSE
          end
        end

  § Errors

      You should always be expecting errors from – and in, but that’s a
      different story – your code:

        expect ArgumentError do
          Integer('1 + 1')
        end

      Often, not only the type of the error, but its description, is important
      to check:

        expect StandardError.new('message') do
          raise StandardError.new('message')
        end

      As with ‹Strings›, ‹Regexps› can be used to check the error description:

        expect StandardError.new(/mess/) do
          raise StandardError.new('message')
        end

  § Queries Through Symbols

      Symbols are generally matched against symbols, but as a special case,
      symbols ending with ‹?› are seen as expectations on the result of query
      methods on the result of the block, given that the method is of zero
      arity and that the result isn’t a Symbol itself.  Simply expect a symbol
      ending with ‹?›:

        expect :empty? do
          []
        end

      To expect it’s negation, expect the same symbol beginning with ‹not_›:

        expect :not_nil? do
          [1, 2, 3]
        end

      This is the same as

        expect true do
          [].empty?
        end

      and

        expect false do
          [1, 2, 3].empty?
        end

      but provides much clearer failure messages.  It also makes the
      expectation’s intent a lot clearer.

  § Queries By Proxy

      There’s also a way to make the expectations of query methods explicit by
      invoking methods on the result of the block.  For example, to check that
      the even elements of the Array ‹[1, 2, 3]› include ‹1› you could write

        expect result.to.include? 1 do
          [1, 2, 3].reject{ |e| e.even? }
        end

      You could likewise check that the result doesn’t include 2:

        expect result.not.to.include? 2 do
          [1, 2, 3].reject{ |e| e.even? }
        end

      This is the same as (and executes a little bit slower than) writing

        expect false do
          [1, 2, 3].reject{ |e| e.even? }.include? 2
        end

      but provides much clearer failure messages.  Given that these two last
      examples would fail, you’d get a message saying “[1, 2, 3]#include?(2)”
      instead of the terser “true≠false”.  It also clearly separates the actual
      expectation from the set-up.

      The keyword for this kind of expectations is ‹result›.  This may be
      followed by any of the methods

    •   ‹#not›
    •   ‹#to›
    •   ‹#be›
    •   ‹#have›

      or any other method you will want to call on the result.  The methods
      ‹#to›, ‹#be›, and ‹#have› do nothing except improve readability.  The
      ‹#not› method inverts the expectation.

  § Literal Literals

      If you need to literally check against any of the types of objects
      otherwise treated specially, that is, any instances of

    •   ‹Module›
    •   ‹Range›
    •   ‹Regexp›
    •   ‹Exception›
    •   ‹Symbol›, given that it ends with ‹?›

      you can do so by wrapping it in ‹literal(…)›:

        expect literal(:empty?) do
          :empty?
        end

      You almost never need to do this, as, for all but symbols, instances will
      match accordingly as well.

  § Expectations on Behavior

      We expect our objects to be on their best behavior.  Lookout allows you
      to make sure that they are.

      Reception expectations let us verify that a method is called in the way
      that we expect it to be:

        expect mock.to.receive.to_str(without_arguments){ '123' } do |o|
          o.to_str
        end

      Here, ‹#mock› creates a mock object, an object that doesn’t respond to
      anything unless you tell it to.  We tell it to expect to receive a call
      to ‹#to_str› without arguments and have ‹#to_str› return ‹'123'› when
      called.  The mock object is then passed in to the block so that the
      expectations placed upon it can be fulfilled.

      Sometimes we only want to make sure that a method is called in the way
      that we expect it to be, but we don’t care if any other methods are
      called on the object.  A stub object, created with ‹#stub›, expects any
      method and returns a stub object that, again, expects any method, and
      thus fits the bill.

        expect stub.to.receive.to_str(without_arguments){ '123' } do |o|
          o.to_str if o.convertable?
        end

      You don’t have to use a mock object to verify that a method is called:

        expect Object.to.receive.name do
          Object.name
        end

      As you have figured out by now, the expected method call is set up by
      calling ‹#receive› after ‹#to›.  ‹#Receive› is followed by a call to the
      method to expect with any expected arguments.  The body of the expected
      method can be given as the block to the method.  Finally, an expected
      invocation count may follow the method.  Let’s look at this formal
      specification in more detail.

      The expected method arguments may be given in a variety of ways.  Let’s
      introduce them by giving some examples:

        expect mock.to.receive.a do |m|
          m.a
        end

      Here, the method ‹#a› must be called with any number of arguments.  It
      may be called any number of times, but it must be called at least once.

      If a method must receive exactly one argument, you can use ‹Object›, as
      the same matching rules apply for arguments as they do for state
      expectations:

        expect mock.to.receive.a(Object) do |m|
          m.a 0
        end

      If a method must receive a specific argument, you can use that argument:

        expect mock.to.receive.a(1..2) do |m|
          m.a 1
        end

      Again, the same matching rules apply for arguments as they do for state
      expectations, so the previous example expects a call to ‹#a› with 1, 2,
      or the Range 1..2 as an argument on ‹m›.

      If a method must be invoked without any arguments you can use
      ‹without_arguments›:

        expect mock.to.receive.a(without_arguments) do |m|
          m.a
        end

      You can of course use both ‹Object› and actual arguments:

        expect mock.to.receive.a(Object, 2, Object) do |m|
          m.a nil, 2, '3'
        end

      The body of the expected method may be given as the block.  Here, calling
      ‹#a› on ‹m› will give the result ‹1›:

        expect mock.to.receive.a{ 1 } do |m|
          raise 'not 1' unless m.a == 1
        end

      If no body has been given, the result will be a stub object.

      To take a block, grab a block parameter and ‹#call› it:

        expect mock.to.receive.a{ |&b| b.call(1) } do |m|
          j = 0
          m.a{ |i| j = i }
          raise 'not 1' unless j == 1
        end

      To simulate an ‹#each›-like method, ‹#call› the block several times.

      Invocation count expectations can be set if the default expectation of
      “at least once” isn’t good enough.  The following expectations are
      possible

    •   ‹#at_most_once›
    •   ‹#once›
    •   ‹#at_least_once›
    •   ‹#twice›

      And, for a given ‹N›,

    •   ‹#at_most(N)›
    •   ‹#exactly(N)›
    •   ‹#at_least(N)›

  § Utilities: Stubs

      Method stubs are another useful thing to have in a unit testing
      framework.  Sometimes you need to override a method that does something a
      test shouldn’t do, like access and alter bank accounts.  We can override
      – stub out – a method by using the ‹#stub› method.  Let’s assume that we
      have an ‹Account› class that has two methods, ‹#slips› and ‹#total›.
      ‹#Slips› retrieves the bank slips that keep track of your deposits to the
      ‹Account› from a database.  ‹#Total› sums the ‹#slips›.  In the following
      test we want to make sure that ‹#total› does what it should do without
      accessing the database.  We therefore stub out ‹#slips› and make it
      return something that we can easily control.

        expect 6 do |m|
          stub(Class.new{
                 def slips
                   raise 'database not available'
                 end

                 def total
                   slips.reduce(0){ |m, n| m.to_i + n.to_i }
                 end
               }.new, :slips => [1, 2, 3]){ |account| account.total }
        end

      To make it easy to create objects with a set of stubbed methods there’s
      also a convenience method:

        expect 3 do
          s = stub(:a => 1, :b => 2)
          s.a + s.b
        end

      This short-hand notation can also be used for the expected value:

        expect stub(:a => 1, :b => 2).to.receive.a do |o|
          o.a + o.b
        end

      and also works for mock objects:

        expect mock(:a => 2, :b => 2).to.receive.a do |o|
          o.a + o.b
        end

      Blocks are also allowed when defining stub methods:

        expect 3 do
          s = stub(:a => proc{ |a, b| a + b })
          s.a(1, 2)
        end

      If need be, we can stub out a specific method on an object:

        expect 'def' do
          stub('abc', :to_str => 'def'){ |a| a.to_str }
        end

      The stub is active during the execution of the block.

  § Overriding Constants

      Sometimes you need to override the value of a constant during the
      execution of some code.  Use ‹#with_const› to do just that:

        expect 'hello' do
          with_const 'A::B::C', 'hello' do
            A::B::C
          end
        end

      Here, the constant ‹A::B::C› is set to ‹'hello'› during the execution of
      the block.  None of the constants ‹A›, ‹B›, and ‹C› need to exist for
      this to work.  If a constant doesn’t exist it’s created and set to a new,
      empty, ‹Module›. The value of ‹A::B::C›, if any, is restored after the
      block returns and any constants that didn’t previously exist are removed.

  § Overriding Environment Variables

      Another thing you often need to control in your tests is the value of
      environment variables.  Depending on such global values is, of course,
      not a good practice, but is often unavoidable when working with external
      libraries.  ‹#With_env› allows you to override the value of environment
      variables during the execution of a block by giving it a ‹Hash› of
      key/value pairs where the key is the name of the environment variable and
      the value is the value that it should have during the execution of that
      block:

        expect 'hello' do
          with_env 'INTRO' => 'hello' do
            ENV['INTRO']
          end
        end

      Any overridden values are restored and any keys that weren’t previously a
      part of the environment are removed when the block returns.

  § Overriding Globals

      You may also want to override the value of a global temporarily:

        expect 'hello' do
          with_global :$stdout, StringIO.new do
            print 'hello'
            $stdout.string
          end
        end

      You thus provide the name of the global and a value that it should take
      during the execution of a block of code.  The block gets passed the
      overridden value, should you need it:

        expect true do
          with_global :$stdout, StringIO.new do |overridden|
            $stdout != overridden
          end
        end

§ Integration

    Lookout can be used from Rake¹.  Simply install Lookout-Rake²:

      % gem install lookout-rake

    and add the following code to your Rakefile

      require 'lookout-rake-3.0'

      Lookout::Rake::Tasks::Test.new

    Make sure to read up on using Lookout-Rake for further benefits and
    customization.

¹ Read more about Rake at http://rake.rubyforge.org/
² Get information on Lookout-Rake at http://disu.se/software/lookout-rake-3.0/

§ API

    Lookout comes with an API¹ that let’s you create things such as new
    expected values, difference reports for your types, and so on.

¹ See http://disu.se/software/lookout-3.0/api/

§ Interface Design

    The default output of Lookout can Spartanly be described as Spartan.  If no
    errors or failures occur, no output is generated.  This is unconventional,
    as unit testing frameworks tend to dump a lot of information on the user,
    concerning things such as progress, test count summaries, and flamboyantly
    colored text telling you that your tests passed.  None of this output is
    needed.  Your tests should run fast enough to not require progress reports.
    The lack of output provides you with the same amount of information as
    reporting success.  Test count summaries are only useful if you’re worried
    that your tests aren’t being run, but if you worry about that, then
    providing such output doesn’t really help.  Testing your tests requires
    something beyond reporting some arbitrary count that you would have to
    verify by hand anyway.

    When errors or failures do occur, however, the relevant information is
    output in a format that can easily be parsed by an ‹'errorformat'› for Vim
    or with {Compilation Mode}¹ for Emacs².  Diffs are generated for Strings,
    Arrays, Hashes, and I/O.

¹ Read up on Compilation mode for Emacs at http://www.emacswiki.org/emacs/CompilationMode
² Visit The GNU Foundation’s Emacs’ software page at http://www.gnu.org/software/emacs/

§ External Design

    Let’s now look at some of the points made in the introduction in greater
    detail.

    Lookout only allows you to set one expectation per test.  If you’re testing
    behavior with a reception expectation, then only one method-invocation
    expectation can be set.  If you’re testing state, then only one result can
    be verified.  It may seem like this would cause unnecessary duplication
    between tests.  While this is certainly a possibility, when you actually
    begin to try to avoid such duplication you find that you often do so by
    improving your interfaces.  This kind of restriction tends to encourage the
    use of value objects, which are easy to test, and more focused objects,
    which require simpler tests, as they have less behavior to test, per
    method.  By keeping your interfaces focused you’re also keeping your tests
    focused.

    Keeping your tests focused improves, in itself, test isolation, but let’s
    look at something that hinders it: setup and tear-down methods.  Most unit
    testing frameworks encourage test fragmentation by providing setup and
    tear-down methods.

    Setup methods create objects and, perhaps, just their behavior for a set of
    tests.  This means that you have to look in two places to figure out what’s
    being done in a test.  This may work fine for few methods with simple
    set-ups, but makes things complicated when the number of tests increases
    and the set-up is complex.  Often, each test further adjusts the previously
    set-up object before performing any verifications, further complicating the
    process of figuring out what state an object has in a given test.

    Tear-down methods clean up after tests, perhaps by removing records from a
    database or deleting files from the file-system.

    The duplication that setup methods and tear-down methods hope to remove is
    better avoided by improving your interfaces.  This can be done by providing
    better set-up methods for your objects and using idioms such as {Resource
    Acquisition Is Initialization}¹ for guaranteed clean-up, test or no test.

    By not using setup and tear-down methods we keep everything pertinent to a
    test in the test itself, thus improving test isolation.  (You also won’t
    {slow down your tests}² by keeping unnecessary state.)

    Most unit test frameworks also allow you to create arbitrary test helper
    methods.  Lookout doesn’t.  The same rationale as that that has been
    crystallized in the preceding paragraphs applies.  If you need helpers
    you’re interface isn’t good enough.  It really is as simple as that.

    To clarify: there’s nothing inherently wrong with test helper methods, but
    they should be general enough that they reside in their own library.  The
    support for mocks in Lookout is provided through a set of test helper
    methods that make it easier to create mocks than it would have been without
    them.  Lookout-Rack³ is another example of a library providing test helper
    methods (well, one method, actually) that are very useful in testing web
    applications that use Rack⁴.

    A final point at which some unit test frameworks try to fragment tests
    further is documentation.  These frameworks provide ways of describing the
    whats and hows of what’s being tested, the rationale being that this will
    provide documentation of both the test and the code being tested.
    Describing how a stack data structure is meant to work is a common example.
    A stack is, however, a rather simple data structure, so such a description
    provides little, if any, additional information that can’t be extracted
    from the implementation and its tests themselves.  The implementation and
    its tests is, in fact, its own best documentation.  Taking the points made
    in the previous paragraphs into account, we should already have simple,
    self-describing, interfaces that have easily understood tests associated
    with them.  Rationales for the use of a given data structure or
    system-design design documentation is better suited in separate
    documentation focused at describing exactly those issues.

¹ Read the Wikipedia entry for Resource Acquisition Is Initialization at
  http://en.wikipedia.org/wiki/Resource_Acquisition_Is_Initialization
² Read how 37signals had problems with slow Test::Unit tests at
  http://37signals.com/svn/posts/2742-the-road-to-faster-tests/
³ Visit the Lookout-Rack home page at
  http://disu.se/software/lookout-rack-1.0/
⁴ Visit the Rack Rubyforge project page at
  http://rack.rubyforge.org/

§ Internal Design

    The internal design of Lookout has had a couple of goals.

  •   As few external dependencies as possible
  •   As few internal dependencies as possible
  •   Internal extensibility provides external extensibility
  •   As fast load times as possible
  •   As high a ratio of value objects to mutable objects as possible
  •   Each object must have a simple, obvious name
  •   Use mix-ins, not inheritance for shared behavior
  •   As few responsibilities per object as possible
  •   Optimizing for speed can only be done when you have all the facts

§ External Dependencies

    Lookout used to depend on Mocha for mocks and stubs.  While benchmarking I
    noticed that a method in Mocha was taking up more than 300 percent of the
    runtime.  It turned out that Mocha’s method for cleaning up back-traces
    generated when a mock failed was doing something incredibly stupid:

      backtrace.reject{ |l| Regexp.new(@lib).match(File.expand_path(l)) }

    Here ‹@lib› is a ‹String› containing the path to the lib sub-directory in
    the Mocha installation directory.  I reported it, provided a patch five
    days later, then waited.  Nothing happened.  {254 days later}¹, according
    to {Wolfram Alpha}², half of my patch was, apparently – I say “apparently”,
    as I received no notification – applied.  By that time I had replaced the
    whole mocking-and-stubbing subsystem and dropped the dependency.

    Many Ruby developers claim that Ruby and its gems are too fast-moving for
    normal package-managing systems to keep up.  This is testament to the fact
    that this isn’t the case and that the real problem is instead related to
    sloppy practices.

    Please note that I don’t want to single out the Mocha library nor its
    developers.  I only want to provide an example where relying on external
    dependencies can be “considered harmful”.

¹ See the Wolfram Alpha calculation at http://www.wolframalpha.com/input/?i=days+between+march+17%2C+2010+and+november+26%2C+2010
² Check out the Wolfram Alpha computational knowledge engine at http://www.wolframalpha.com/

§ Internal Dependencies

    Lookout has been designed so as to keep each subsystem independent of any
    other.  The diff subsystem is, for example, completely decoupled from any
    other part of the system as a whole and could be moved into its own library
    at a time where that would be of interest to anyone.  What’s perhaps more
    interesting is that the diff subsystem is itself very modular.  The data
    passes through a set of filters that depends on what kind of diff has been
    requested, each filter yielding modified data as it receives it.  If you
    want to read some rather functional Ruby I can highly recommend looking at
    the code in the ‹lib/lookout/diff› directory.

    This lookout on the design of the library also makes it easy to extend
    Lookout.  Lookout-rack was, for example, written in about four hours and
    about 5 of those 240 minutes were spent on setting up the interface between
    the two.

§ Optimizing For Speed

    The following paragraph is perhaps a bit personal, but might be interesting
    nonetheless.

    I’ve always worried about speed.  The original Expectations library used
    ‹extend› a lot to add new behavior to objects.  Expectations, for example,
    used to hold the result of their execution (what we now term “evaluation”)
    by being extended by a module representing success, failure, or error.  For
    the longest time I used this same method, worrying about the increased
    performance cost that creating new objects for results would incur.  I
    finally came to a point where I felt that the code was so simple and clean
    that rewriting this part of the code for a benchmark wouldn’t take more
    than perhaps ten minutes.  Well, ten minutes later I had my results and
    they confirmed that creating new objects wasn’t harming performance.  I was
    very pleased.

§ Naming

    I hate low lines (underscores).  I try to avoid them in method names and I
    always avoid them in file names.  Since the current “best practice” in the
    Ruby community is to put ‹BeginEndStorage› in a file called
    ‹begin_end_storage.rb›, I only name constants using a single noun.  This
    has had the added benefit that classes seem to have acquired less behavior,
    as using a single noun doesn’t allow you to tack on additional behavior
    without questioning if it’s really appropriate to do so, given the rather
    limited range of interpretation for that noun.  It also seems to encourage
    the creation of value objects, as something named ‹Range› feels a lot more
    like a value than ‹BeginEndStorage›.  (To reach object-oriented-programming
    Nirvana you must achieve complete value.)

§ News

  § 3.0.0

      The ‹xml› expectation has been dropped.  It wasn’t documented, didn’t
      suit very many use cases, and can be better implemented by an external
      library.

      The ‹arg› argument matcher for mock method arguments has been removed, as
      it didn’t provide any benefit over using Object.

      The ‹#yield› and ‹#each› methods on stub and mock methods have been
      removed.  They were slightly weird and their use case can be implemented
      using block parameters instead.

      The ‹stub› method inside ‹expect› blocks now stubs out the methods during
      the execution of a provided block instead of during the execution of the
      whole except block.

      When a mock method is called too many times, this is reported
      immediately, with a full backtrace.  This makes it easier to pin down
      what’s wrong with the code.

      Query expectations were added.

      Explicit query expectations were added.

      Fluent boolean expectations, for example, ‹expect nil.to.be.nil?› have
      been replaced by query expectations (‹expect :nil? do nil end›) and
      explicit query expectations (‹expect result.to.be.nil? do nil end›).
      This was done to discourage creating objects as the expected value and
      creating objects that change during the course of the test.

      The ‹literal› expectation was added.

      Equality (‹#==›) is now checked before “caseity” (‹#===›) for modules,
      ranges, and regular expressions to match the documentation.

§ Financing

    Currently, most of my time is spent at my day job and in my rather busy
    private life.  Please motivate me to spend time on this piece of software
    by donating some of your money to this project.  Yeah, I realize that
    requesting money to develop software is a bit, well, capitalistic of me.
    But please realize that I live in a capitalistic society and I need money
    to have other people give me the things that I need to continue living
    under the rules of said society.  So, if you feel that this piece of
    software has helped you out enough to warrant a reward, please PayPal a
    donation to [email protected]¹.  Thanks!  Your support won’t go unnoticed!

¹ Send a donation:
  https://www.paypal.com/cgi-bin/webscr?cmd=_donations&[email protected]&item_name=Lookout

§ Reporting Bugs

    Please report any bugs that you encounter to the {issue tracker}¹.

  ¹ See https://github.com/now/lookout/issues

§ Contributors

    Contributors to the original expectations codebase are mentioned there.  We
    hope no one on that list feels left out of this list.  Please
    {let us know}¹ if you do.

  •   Nikolai Weibull

¹ Add an issue to the Lookout issue tracker at https://github.com/now/lookout/issues

§ Licensing

    Lookout is free software: you may redistribute it and/or modify it under
    the terms of the {GNU Lesser General Public License, version 3}¹ or later²,
    as published by the {Free Software Foundation}³.

¹ See http://disu.se/licenses/lgpl-3.0/
² See http://gnu.org/licenses/
³ See http://fsf.org/

About

Lookout is a unit testing framework for Ruby that puts your results in focus

Resources

License

Unknown, Unknown licenses found

Licenses found

Unknown
COPYING
Unknown
COPYING.LESSER

Stars

Watchers

Forks

Packages

No packages published

Languages