Skip to content

Signals

Nicholas Berlette edited this page Feb 15, 2022 · 6 revisions

Signals

Syntax

SG_ <Mnemonic> : <Start>|<Length>@<BOM><Sign> (<factor>,<offset>) [<min>|<max>] "[unit]" [Receivers]
  • Mnemonic: unique mnemonic name identifier for the Signal
  • Start: Which bit (inclusive) does this signal begin at?
  • Length: Total length of bits this signal encompasses
  • Sign: + = unsigned; - = signed
  • BOM: 1 = little-endian, Intel; 0 = big-endian, Motorola
  • factor: decimal number multiplied with signal value (default 1)
  • offset: decimal number added to signal value (default 0)
  • [<min>|<max>]: relative to factor and offset. See below.
  • [unit]: string representation of this value's units (e.g. mph)
  • [Receivers]: space-separated BoardUnit (BU_) consumer list.

Notes

  • Must begin with a single whitespace indentation
  • Immediately follows the Parent Message (BO_), or another signal (SG_).
    • No padding with blank lines between them

Examples

8 bit (0-255 decimal)

 SG_ BattVoltage : 0|8@1+ (.1,0) [0|25.5] "volts" Vector__XXX

0.1 (factor) x 255 -> 25.5

12-bit signal (0-4095 decimal)

 SG_ EngineRPM : 8|12@1+ (0.125,0) [0|512] "" Vector__XXX

0.125 (factor) x 4095->511.875 ~ 512

16-bit signal (0-65535 decimal)

 SG_ FuelLevel : 8|16@1+ (0.00625,0) [0|41] "liters" Vector__XXX

0.00625 (factor) x 65535->41 liters, or 16.5 gallons


Multiplexers

 SG_ <Mnemonic> [M|m<M-ID>] : <Start>|<Length>@<BOM><Sign> (<factor>,<offset>) [<min>|<max>] "[unit]" [Receivers]
  • M: If M than this signals contains a multiplexer identifier.
  • M-ID: Signal definition is only used if the value of the multiplexer signal equals to this value.

Attributes

Attribute Name Definition Default
SigType BA_DEF_ SG_ "SigType" ENUM "Default","Range","RangeSigned","Control","DTC"; BA_DEF_DEF_ "SigType" "Default";
SystemSignalLongSymbol BA_DEF_ SG_ "SystemSignalLongSymbol" STRING; BA_DEF_DEF_ "SystemSignalLongSymbol" "";
GenSigSendType BA_DEF_ SG_ "GenSigSendType" ENUM "none","Cyclic","OnWrite","OnChange"; BA_DEF_DEF_ "GenSigSendType" "none";
GenSigILSupport BA_DEF_ SG_ "GenSigILSupport" ENUM "Yes","No"; BA_DEF_DEF_ "GenSigILSupport" "Yes";
GenSigCycleTime BA_DEF_ SG_ "GenSigCycleTime" INT <min=0> <max=10000> ; BA_DEF_DEF_ "GenSigCycleTime" 0;
GenSigDelayTime BA_DEF_ SG_ "GenSigDelayTime" INT <min=0> <max=10000> ; BA_DEF_DEF_ "GenSigDelayTime" 0;
GenSigStartDelayTime BA_DEF_ SG_ "GenSigStartDelayTime" INT <min=0> <max=10000> ; BA_DEF_DEF_ "GenSigStartDelayTime" 0;
GenSigStartValue BA_DEF_ SG_ "GenSigStartValue" INT <min=0> <max>; BA_DEF_DEF_ "GenSigStartValue" 0;
GenSigEVName BA_DEF_ SG_ "GenSigEVName" STRING; BA_DEF_DEF_ "GenSigEVName" "Env@<Node>_@<Signal>";