Skip to content

ESP32IGate V1.3 (Factory reset require)

Latest
Latest
Compare
Choose a tag to compare
@nakhonthai nakhonthai released this 25 Mar 05:45
· 5 commits to master since this release
V1.3
1b73997

V1.3 History Update

-Fix AFSK & FIFO
-Fix GNSS poll
-Fix Web Socket
-Fix Memory allocate
-Fix GPIO H/L active

V1.3a History Update

-Fix Crash and Reboot
-Fix Source call of digirepeater mode

How to Update new firmware

  • 1.Download firmware and open the web browser in to webservice
  • 2.Select Tab About/Firmware and click Choose File for firmware and click Firmware Update , wait and reboot system
  • 3 Factory re connect the USB plug, when display logo on OLED or LED RX,TX light then press hold the BOOT button
  • 4.You can enter configuration mode in 2 ways:
  • 4.1 Default config then go to WiFi AP SSID: ESP32IGate PASS: aprsthnetwork and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
  • 4.2 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork and use web browser by IP from router/share smartphone default web auth USER: admin PASS: admin

ESP32IGate firmware installation (do it first time, next time via the web browser)

  • 1.Connect the USB cable to the ESP32DR,ESP32DR_SA868,ESP32-Doit-devkit.
  • 2.Press and hold the BOOT button (without releasing it), then press the RST button, then release the RST button, and finally release the BOOT button
  • 3.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32IGate_Vxx_DIY_OLED.bin for non RF Module or ESP32IGate_Vxx_RFM_OLED.bin with RF Module SA8x8/SR_FRS, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x0000 and boot_app0.bin at 0xe000
  • 4.Click the START button in the program and wait for the upload to complete
  • 5 Factory re connect the USB plug, when display logo on OLED or LED RX,TX light then press hold the BOOT button
  • 6.You can enter configuration mode in 2 ways:
  • 6.1 Default config then go to WiFi AP SSID: ESP32IGate PASS: aprsthnetwork and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
  • 6.2 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork and use web browser by IP from router/share smartphone default web auth USER: admin PASS: admin

ESP32 Flash Download Tools

https://www.espressif.com/en/support/download/other-tools

ESP32Tool

Assets 7
Loading