Update dependency boto3 to v1.37.25

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
boto3	==1.37.11 -> ==1.37.25

---

Release Notes

boto/boto3 (boto3)

v1.37.25

Compare Source

=======

• api-change:cleanrooms: [botocore] This release adds support for updating the analytics engine of a collaboration.
• api-change:sagemaker: [botocore] Added tagging support for SageMaker notebook instance lifecycle configurations

v1.37.24

Compare Source

=======

• api-change:bedrock-runtime: [botocore] Add Prompt Caching support to Converse and ConverseStream APIs
• api-change:deadline: [botocore] With this release you can use a new field to specify the search term match type. Search term match types currently support fuzzy and contains matching.
• api-change:ec2: [botocore] Release VPC Route Server, a new feature allowing dynamic routing in VPCs.
• api-change:eks: [botocore] Add support for updating RemoteNetworkConfig for hybrid nodes on EKS UpdateClusterConfig API
• api-change:marketplace-entitlement: [botocore] Add support for Marketplace Entitlement Service dual-stack endpoints.
• api-change:outposts: [botocore] Enabling Asset Level Capacity Management feature, which allows customers to create a Capacity Task for a single Asset on their active Outpost.
• api-change:s3: [botocore] Amazon S3 adds support for S3 Access Points for directory buckets in AWS Dedicated Local Zones
• api-change:s3control: [botocore] Amazon S3 adds support for S3 Access Points for directory buckets in AWS Dedicated Local Zones
• api-change:sesv2: [botocore] Add dual-stack support to global endpoints.
• api-change:transfer: [botocore] Add WebAppEndpointPolicy support for WebApps

v1.37.23

Compare Source

=======

• api-change:apigateway: [botocore] Adds support for setting the IP address type to allow dual-stack or IPv4 address types to invoke your APIs or domain names.
• api-change:apigatewayv2: [botocore] Adds support for setting the IP address type to allow dual-stack or IPv4 address types to invoke your APIs or domain names.
• api-change:bedrock-runtime: [botocore] Launching Multi-modality Content Filter for Amazon Bedrock Guardrails.
• api-change:codebuild: [botocore] This release adds support for cacheNamespace in ProjectCache
• api-change:ecs: [botocore] This is an Amazon ECS documentation only release that addresses tickets.
• api-change:meteringmarketplace: [botocore] Add support for Marketplace Metering Service dual-stack endpoints.
• api-change:networkmanager: [botocore] Add support for NetworkManager Dualstack endpoints.
• api-change:payment-cryptography: [botocore] The service adds support for transferring AES-256 and other keys between the service and other service providers and HSMs. This feature uses ECDH to derive a one-time key transport key to enable these secure key exchanges.
• api-change:quicksight: [botocore] RLS permission dataset with userAs: RLS_RULES flag, Q in QuickSight/Threshold Alerts/Schedules/Snapshots in QS embedding, toggle dataset refresh email alerts via API, transposed table with options: column width, type and index, toggle Q&A on dashboards, Oracle Service Name when creating data source.
• api-change:sagemaker: [botocore] TransformAmiVersion for Batch Transform and SageMaker Search Service Aggregate Search API Extension

v1.37.22

Compare Source

=======

• api-change:batch: [botocore] This release will enable two features: Firelens log driver, and Execute Command on Batch jobs on ECS. Both features will be passed through to ECS.
• api-change:bcm-pricing-calculator: [botocore] Added standaloneAccountRateTypeSelections for GetPreferences and UpdatePreferences APIs. Added STALE enum value to status attribute in GetBillScenario and UpdateBillScenario APIs.
• api-change:bedrock-agent-runtime: [botocore] bedrock flow now support node action trace.
• api-change:cloudformation: [botocore] Adding support for the new parameter "ScanFilters" in the CloudFormation StartResourceScan API. When this parameter is included, the StartResourceScan API will initiate a scan limited to the resource types specified by the parameter.
• api-change:datazone: [botocore] This release adds new action type of Create Listing Changeset for the Metadata Enforcement Rule feature.
• api-change:eks: [botocore] Added support for BOTTLEROCKET FIPS AMIs to AMI types in US regions.
• api-change:gamelift: [botocore] Amazon GameLift Servers add support for additional instance types.
• api-change:iam: [botocore] Update IAM dual-stack endpoints for BJS, IAD and PDT partitions
• api-change:sagemaker: [botocore] add: recovery mode for SageMaker Studio apps
• api-change:sso-oidc: [botocore] This release adds AwsAdditionalDetails in the CreateTokenWithIAM API response.

v1.37.21

Compare Source

=======

• api-change:arc-zonal-shift: [botocore] Add new shiftType field for ARC zonal shifts.
• api-change:directconnect: [botocore] With this release, AWS Direct Connect allows you to tag your Direct Connect gateways. Tags are metadata that you can create and use to manage your Direct Connect gateways. For more information about tagging, see AWS Tagging Strategies.
• api-change:mediaconvert: [botocore] This release adds a configurable Quality Level setting for the top rendition of Auto ABR jobs
• api-change:mediatailor: [botocore] Add support for log filtering which allow customers to filter out selected event types from logs.
• api-change:polly: [botocore] Added support for the new voice - Jihye (ko-KR). Jihye is available as a Neural voice only.
• api-change:rds: [botocore] Add note about the Availability Zone where RDS restores the DB cluster for the RestoreDBClusterToPointInTime operation.
• api-change:wafv2: [botocore] This release adds the ability to associate an AWS WAF v2 web ACL with an AWS Amplify App.

v1.37.20

Compare Source

=======

• api-change:bedrock-agent: [botocore] Adding support for Amazon OpenSearch Managed clusters as a vector database in Knowledge Bases for Amazon Bedrock
• api-change:eks: [botocore] Added support to override upgrade-blocking readiness checks via force flag when updating a cluster.
• api-change:gameliftstreams: [botocore] Minor updates to improve developer experience.
• api-change:keyspaces: [botocore] Removing replication region limitation for Amazon Keyspaces Multi-Region Replication APIs.
• api-change:marketplace-entitlement: [botocore] This release enhances the GetEntitlements API to support new filter CUSTOMER_AWS_ACCOUNT_ID in request and CustomerAWSAccountId field in response.
• api-change:meteringmarketplace: [botocore] This release enhances the BatchMeterUsage API to support new field CustomerAWSAccountId in request and response and making CustomerIdentifier optional. CustomerAWSAccountId or CustomerIdentifier must be provided in request but not both.
• api-change:sagemaker: [botocore] This release adds support for customer-managed KMS keys in Amazon SageMaker Partner AI Apps
• api-change:workspaces-thin-client: [botocore] Deprecate tags field in Get API responses

v1.37.19

Compare Source

=======

• api-change:iotwireless: [botocore] Mark EutranCid under LteNmr optional.
• api-change:pcs: [botocore] ClusterName/ClusterIdentifier, ComputeNodeGroupName/ComputeNodeGroupIdentifier, and QueueName/QueueIdentifier can now have 10 characters, and a minimum of 3 characters. The TagResource API action can now return ServiceQuotaExceededException.
• api-change:qconnect: [botocore] Provides the correct value for supported model ID.
• api-change:ssm: [botocore] This release adds the AvailableSecurityUpdatesComplianceStatus field to patch baseline operations, as well as the AvailableSecurityUpdateCount and InstancesWithAvailableSecurityUpdates to patch state operations. Applies to Windows Server managed nodes only.

v1.37.18

Compare Source

=======

• api-change:bedrock: [botocore] A CustomModelUnit(CMU) is an abstract view of the hardware utilization that Bedrock needs to host a a single copy of your custom imported model. Bedrock determines the number of CMUs that a model copy needs when you import the custom model. You can use CMUs to estimate the cost of Inference's.
• api-change:datazone: [botocore] Add support for overriding selection of default AWS IAM Identity Center instance as part of Amazon DataZone domain APIs.
• api-change:route53-recovery-control-config: [botocore] Adds dual-stack (IPv4 and IPv6) endpoint support for route53-recovery-control-config operations, opt-in dual-stack addresses for cluster endpoints, and UpdateCluster API to update the network-type of clusters between IPv4 and dual-stack.
• api-change:sagemaker: [botocore] This release does the following: 1.) Adds DurationHours as a required field to the SearchTrainingPlanOfferings action in the SageMaker AI API; 2.) Adds support for G6e instance types for SageMaker AI inference optimization jobs.

v1.37.17

Compare Source

=======

• api-change:amplify: [botocore] Added appId field to Webhook responses
• api-change:bedrock: [botocore] With this release, Bedrock Evaluation will now support bring your own inference responses.
• api-change:controlcatalog: [botocore] Add ExemptAssumeRoot parameter to adapt for new AWS AssumeRoot capability.
• api-change:mailmanager: [botocore] Amazon SES Mail Manager. Extended rule string and boolean expressions to support analysis in condition evaluation. Extended ingress point string expression to support analysis in condition evaluation
• api-change:network-firewall: [botocore] You can now use flow operations to either flush or capture traffic monitored in your firewall's flow table.

v1.37.16

Compare Source

=======

• api-change:bedrock: [botocore] Support custom prompt routers for evaluation jobs
• api-change:ec2: [botocore] Doc-only updates for EC2 for March 2025.
• api-change:lambda: [botocore] Add Ruby 3.4 (ruby3.4) support to AWS Lambda.
• api-change:mediaconnect: [botocore] This release adds support for NDI flow outputs in AWS Elemental MediaConnect. You can now send content from your MediaConnect transport streams directly to your NDI environment using the new NDI output type.
• api-change:neptune-graph: [botocore] Update IAM Role ARN Validation to Support Role Paths
• api-change:sagemaker: [botocore] Added support for g6, g6e, m6i, c6i instance types in SageMaker Processing Jobs.

v1.37.15

Compare Source

=======

• api-change:appsync: [botocore] Providing Tagging support for DomainName in AppSync
• api-change:cleanrooms: [botocore] This release adds support for PySpark jobs. Customers can now analyze data by running jobs using approved PySpark analysis templates.
• api-change:mediaconvert: [botocore] This release adds support for AVC passthrough, the ability to specify PTS offset without padding, and an A/V segment matching feature.
• api-change:route53: [botocore] Amazon Route 53 now supports the iso-f regions for private DNS Amazon VPCs and cloudwatch healthchecks.

v1.37.14

Compare Source

=======

• api-change:application-signals: [botocore] This release adds support for adding, removing, and listing SLO time exclusion windows with the BatchUpdateExclusionWindows and ListServiceLevelObjectiveExclusionWindows APIs.
• api-change:geo-maps: [botocore] Provide support for vector map styles in the GetStaticMap operation.
• api-change:rum: [botocore] CloudWatch RUM now supports unminification of JS error stack traces.
• api-change:taxsettings: [botocore] Adjust Vietnam PaymentVoucherNumber regex and minor API change.
• api-change:wafv2: [botocore] AWS WAF now lets you inspect fragments of request URIs. You can specify the scope of the URI to inspect and narrow the set of URI fragments.

v1.37.13

Compare Source

=======

• api-change:cognito-identity: [botocore] Updated API model build artifacts for identity pools
• api-change:cognito-idp: [botocore] Minor description updates to API parameters
• api-change:glue: [botocore] This release added AllowFullTableExternalDataAccess to glue catalog resource.
• api-change:lakeformation: [botocore] This release added "condition" to LakeFormation OptIn APIs, also added WithPrivilegedAccess flag to RegisterResource and DescribeResource.

v1.37.12

Compare Source

=======

• api-change:acm-pca: [botocore] Private Certificate Authority service now supports P521 and RSA3072 key algorithms.
• api-change:amplify: [botocore] Introduced support for Skew Protection. Added enableSkewProtection field to createBranch and updateBranch API.
• api-change:codebuild: [botocore] AWS CodeBuild now supports webhook filtering by organization name
• api-change:datazone: [botocore] This release adds support to update projects and environments
• api-change:dynamodb: [botocore] Generate account endpoints for DynamoDB requests using ARN-sourced account ID when available
• api-change:ec2: [botocore] This release changes the CreateLaunchTemplate, CreateLaunchTemplateVersion, ModifyLaunchTemplate CLI and SDKs such that if you do not specify a client token, a randomly generated token is used for the request to ensure idempotency.
• api-change:ivs-realtime: [botocore] IVS Real-Time now offers customers the ability to adjust the participant & composition recording segment duration
• api-change:logs: [botocore] Updated CreateLogAnomalyDetector to accept only kms key arn
• api-change:mediapackagev2: [botocore] This release adds the ResetChannelState and ResetOriginEndpointState operation to reset MediaPackage V2 channel and origin endpoint. This release also adds a new field, UrlEncodeChildManifest, for HLS/LL-HLS to allow URL-encoding child manifest query string based on the requirements of AWS SigV4.
• api-change:s3control: [botocore] Updating GetDataAccess response for S3 Access Grants to include the matched Grantee for the requested prefix

---

Configuration

📅 Schedule: Branch creation - "every weekend" in timezone US/Eastern, Automerge - At any time (no schedule defined).

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[renovate]

⚠️ Artifact update problem

Renovate failed to update an artifact related to this branch. You probably do not want to merge this PR as-is.

♻ Renovate will retry this branch, including artifacts, only when one of the following happens:

• any of the package files in this branch needs updating, or
• the branch becomes conflicted, or
• you click the rebase/retry checkbox if found above, or
• you rename this PR's title to start with "rebase!" to trigger it manually

The artifact failure details are included below:

File name: src/transcoding/pyproject.toml

Post-upgrade command 'uv sync' has not been added to the allowed list in allowedCommands