Merge pull request #2425 from AnthonyTsu1984/v2.3.7

update docs

site/en/getstarted/standalone/install_standalone-aptyum.md

@@ -2,7 +2,7 @@
 id: install_standalone-aptyum.md
 label: Dpkg
 related_key: Install
-order: 1
+order: 3
 group: install_standalone-docker.md
 summary: Learn how to install Milvus stanalone with dpkg.
 ---

site/en/getstarted/standalone/install_standalone-docker-compose.md

@@ -0,0 +1,135 @@
+---
+id: install_standalone-docker-compose.md
+label: Docker
+related_key: Docker
+order: 4
+group: install_standalone-docker.md
+summary: Learn how to install Milvus standalone with Docker Compose.
+---
+
+{{tab}}
+
+# Install Milvus Standalone with Docker Compose
+
+This topic describes how to install Milvus standalone with Docker Compose.
+
+## Prerequisites
+
+- Check whether [Docker and Docker Compose](https://docs.docker.com/compose/install/) are installed on your machine.
+- Check [the requirements](prerequisite-docker.md) for hardware and software requirements before installing Milvus.
+
+  - For the users using MacOS 10.14 or later, set the Docker virtual machine (VM) to use a minimum of 2 virtual CPUs (vCPUs) and 8 GB of initial memory. Otherwise, the installation might fail.
+
+## Procedure
+
+To install Milvus standalone with Docker Compose, follow these steps:
+
+1. Start Milvus.
+
+```
+sudo docker run -d \
+--name milvus-standalone \
+--security-opt seccomp:unconfined \
+-e ETCD_USE_EMBED=true \
+-e ETCD_DATA_DIR=/var/lib/milvus/etcd \
+-e ETCD_CONFIG_PATH=/milvus/configs/embedEtcd.yaml \
+-e COMMON_STORAGETYPE=local \
+-v ${DOCKER_VOLUME_DIRECTORY:-.}/volumes/milvus:/var/lib/milvus \
+-v ${DOCKER_VOLUME_DIRECTORY:-.}/embedEtcd.yaml:/milvus/configs/embedEtcd.yaml \
+-p 19530:19530 \
+-p 9091:9091 \
+-p 2379:2379 \
+--health-cmd="curl -f http://localhost:9091/healthz" \
+--health-interval=30s \
+--health-start-period=90s \
+--health-timeout=20s \
+--health-retries=3 \
+milvusdb/milvus:v2.3.5 \
+milvus run standalone
+```
+
+### Download the `YAML` file
+
+[Download](https://github.com/milvus-io/milvus/releases/download/v{{var.milvus_release_tag}}/milvus-standalone-docker-compose.yml) `milvus-standalone-docker-compose.yml` and save it as `docker-compose.yml` manually, or with the following command.
+
+```shell
+$ wget https://github.com/milvus-io/milvus/releases/download/v{{var.milvus_release_tag}}/milvus-standalone-docker-compose.yml -O docker-compose.yml
+```
+
+
+### Start Milvus
+
+In the directory that holds `docker-compose.yml`, start Milvus by running:
+
+```shell
+$ sudo docker compose up -d
+```
+
+<div class="alert note">
+
+If you failed to run the above command, please check whether your system has Docker Compose V1 installed. If this is the case, you are advised to migrate to Docker Compose V2 due to the notes on [this page](https://docs.docker.com/compose/).
+
+</div>
+
+```text
+Creating milvus-etcd  ... done
+Creating milvus-minio ... done
+Creating milvus-standalone ... done
+```
+
+## Verify the Installation
+
+Now check if the containers are up and running.
+
+```shell
+$ sudo docker compose ps
+```
+
+After Milvus standalone starts, there will be three docker containers running, including the Milvus standalone service and its two dependencies.
+
+```
+      Name                     Command                  State                            Ports
+--------------------------------------------------------------------------------------------------------------------
+milvus-etcd         etcd -advertise-client-url ...   Up             2379/tcp, 2380/tcp
+milvus-minio        /usr/bin/docker-entrypoint ...   Up (healthy)   9000/tcp
+milvus-standalone   /tini -- milvus run standalone   Up             0.0.0.0:19530->19530/tcp, 0.0.0.0:9091->9091/tcp
+```
+
+### Connect to Milvus
+
+Verify which local port the Milvus server is listening on. Replace the container name with your own.
+
+```bash
+$ docker port milvus-standalone 19530/tcp
+```
+
+Please refer to [Hello Milvus](https://milvus.io/docs/example_code.md), then run the example code.
+
+## Stop Milvus
+
+To stop Milvus standalone, run:
+```
+sudo docker compose down
+```
+
+To delete data after stopping Milvus, run:
+```
+sudo rm -rf  volumes
+```
+
+## What's next
+
+Having installed Milvus, you can:
+- Check [Hello Milvus](example_code.md) to run an example code with different SDKs to see what Milvus can do.
+- Check [In-memory Index](index.md) for more about CPU-compatible index types.
+- Learn the basic operations of Milvus:
+  - [Connect to Milvus server](manage_connection.md)
+  - [Manage Databases](manage_databases.md)
+  - [Create a collection](create_collection.md)
+  - [Create a partition](create_partition.md)
+  - [Insert data](insert_data.md)
+  - [Conduct a vector search](search.md)
+- Explore [Milvus Backup](milvus_backup_overview.md), an open-source tool for Milvus data backups.
+- Explore [Birdwatcher](birdwatcher_overview.md), an open-source tool for debugging Milvus and dynamic configuration updates.
+- Explore [Attu](https://milvus.io/docs/attu.md), an open-source GUI tool for intuitive Milvus management.
+- [Monitor Milvus with Prometheus](monitor.md)

site/en/getstarted/standalone/install_standalone-docker.md

@@ -63,4 +63,4 @@ Having installed Milvus, you can:
 - Explore [Milvus Backup](milvus_backup_overview.md), an open-source tool for Milvus data backups.
 - Explore [Birdwatcher](birdwatcher_overview.md), an open-source tool for debugging Milvus and dynamic configuration updates.
 - Explore [Attu](https://milvus.io/docs/attu.md), an open-source GUI tool for intuitive Milvus management.
-- [Monitor Milvus with Prometheus](monitor.md)
+- [Monitor Milvus with Prometheus](monitor.md)

site/en/getstarted/standalone/install_standalone-helm.md

@@ -2,7 +2,7 @@
 id: install_standalone-helm.md
 label: Helm
 related_key: Helm
-order: 3
+order: 2
 group: install_standalone-docker.md
 summary: Learn how to install Milvus standalone on Kubernetes.
 ---

site/en/getstarted/standalone/install_standalone-operator.md

@@ -1,7 +1,7 @@
 ---
 id: install_standalone-operator.md
 label: Milvus Operator
-order: 2
+order: 1
 group: install_standalone-docker.md
 summary: Learn how to install Milvus stanalone with Milvus Operator.
 ---

site/en/getstarted/with_gpu/install_cluster-helm-gpu.md

@@ -1,8 +1,8 @@
 ---
 id: install_cluster-helm-gpu.md
-label: Cluster
+label: Cluster (Helm)
 related_key: Kubernetes
-order: 1
+order: 2
 group: install_standalone-helm-gpu.md
 summary: Learn how to install Milvus cluster on Kubernetes.
 ---

site/en/getstarted/with_gpu/install_standalone-docker-compose-gpu.md

@@ -0,0 +1,170 @@
+---
+id: install_standalone-docker-compose-gpu.md
+label: Standalone (Docker)
+related_key: Kubernetes
+order: 1
+group: install_standalone-helm-gpu.md
+summary: Learn how to install Milvus cluster on Kubernetes.
+---
+
+# Install Milvus Cluster with Docker Compose
+
+This topic describes how to install a Milvus cluster with GPU support using Docker Compose.
+
+## Prerequisites
+
+Before installing Milvus with GPU support, make sure you have the following prerequisites:
+
+- The compute capability of your GPU device is 6.1, 7.0, 7.5, or 8.0. To check whether your GPU device suffices the requirement, check [Your GPU Compute Capability](https://developer.nvidia.com/cuda-gpus) on the NVIDIA developer website.
+
+- You have installed the NVIDIA driver for your GPU device on one of [the supported Linux distributions](https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/latest/install-guide.html#linux-distributions) and then the NVIDIA Container Toolkit following [this guide](https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/latest/install-guide.html).
+
+- You have installed a Kubernetes cluster, and the `kubectl` command-line tool has been configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts.
+
+- You have installed Docker and Docker Compose on your local machine.
+- Check [the requirements](prerequisite-docker.md) for hardware and software requirements before installing Milvus.
+
+  - For the users using MacOS 10.14 or later, set the Docker virtual machine (VM) to use a minimum of 2 virtual CPUs (vCPUs) and 8 GB of initial memory. Otherwise, the installation might fail.
+
+## Install Milvus Standalone with Docker Compose
+
+[Download](https://github.com/milvus-io/milvus/releases/download/v{{var.milvus_release_tag}}/milvus-standalone-docker-compose-gpu.yml) `milvus-standalone-docker-compose-gpu.yml` and save it as `docker-compose.yml` manually, or with the following command.
+
+  ```
+  $ wget https://github.com/milvus-io/milvus/releases/download/v{{var.milvus_release_tag}}/milvus-standalone-docker-compose-gpu.yml -O docker-compose.yml
+  ```
+
+  You need to make some changes to the environment variables of the standalone service in the YAML file as follows:
+
+  - To assign a specific GPU device to Milvus, locate the `deploy.resources.reservations.devices[0].devices_ids` field in the definition of the `standalone` service and replace its value with the ID of the desired GPU. You can use the `nvidia-smi` tool, included with NVIDIA GPU display drivers, to determine the ID of a GPU device. Milvus supports multiple GPU devices.
+
+  - Add `KNOWHERE_GPU_MEM_POOL_SIZE` in the `environment` section of the `standalone` service and set its value to reflect the size of a shared display memory pool. The format for the size is `initialSize;maximumSize`, where `initialSize` represents the initial size of the memory pool and `maximumSize` represents its maximum size. Both values should be integers set in MB joined by a semicolon(`;`). Milvus uses this field to allocate display memory to each process.
+
+  Assign a single GPU device to Milvus:
+
+  ```yaml
+  ...
+  standalone:
+    environment:
+      ...
+      KNOWHERE_GPU_MEM_POOL_SIZE: 2048;4096
+    ...
+    deploy:
+      resources:
+        reservations:
+          devices:
+            - driver: nvidia
+              capabilities: ["gpu"]
+              device_ids: ["0"]
+  ...
+  ```
+
+  Assign multiple GPU devices to Milvus:
+
+  ```yaml
+  ...
+  standalone:
+    environment:
+      ...
+      KNOWHERE_GPU_MEM_POOL_SIZE: 2048;4096
+    ...
+    deploy:
+      resources:
+        reservations:
+          devices:
+            - driver: nvidia
+              capabilities: ["gpu"]
+              device_ids: ['0', '1']
+  ...
+  ```
+
+### Start Milvus
+
+In the directory that holds `docker-compose.yml`, start Milvus by running:
+
+```shell
+$ sudo docker compose up -d
+```
+
+<div class="alert note">
+
+If you failed to run the above command, please check whether your system has Docker Compose V1 installed. If this is the case, you are advised to migrate to Docker Compose V2 due to the notes on [this page](https://docs.docker.com/compose/).
+
+</div>
+
+```text
+Creating milvus-etcd  ... done
+Creating milvus-minio ... done
+Creating milvus-standalone ... done
+```
+
+Now check if the containers are up and running.
+
+```
+$ sudo docker compose ps
+```
+
+## Verify the Installation
+
+After Milvus standalone starts, there will be three docker containers running, including the Milvus standalone service and its two dependencies.
+
+```
+      Name                     Command                  State                            Ports
+--------------------------------------------------------------------------------------------------------------------
+milvus-etcd         etcd -advertise-client-url ...   Up             2379/tcp, 2380/tcp
+milvus-minio        /usr/bin/docker-entrypoint ...   Up (healthy)   9000/tcp
+milvus-standalone   /tini -- milvus run standalone   Up             0.0.0.0:19530->19530/tcp, 0.0.0.0:9091->9091/tcp
+```
+
+If you have assigned multiple GPU devices to Milvus in `docker-compose.yml`, you can specify which GPU device is visible or available for use.
+
+Make GPU device `0` visible to Milvus:
+
+```shell
+CUDA_VISIBLE_DEVICES=0 ./milvus run standalone
+```
+
+Make GPU devices `0` and `1` visible to Milvus:
+
+```shell
+CUDA_VISIBLE_DEVICES=0,1 ./milvus run standalone
+```
+
+### Connect to Milvus
+
+Verify which local port the Milvus server is listening on. Replace the container name with your own.
+
+```bash
+$ docker port milvus-standalone 19530/tcp
+```
+
+Please refer to [Hello Milvus](https://milvus.io/docs/example_code.md), then run the example code.
+
+## Stop Milvus
+
+To stop Milvus standalone, run:
+```
+sudo docker compose down
+```
+
+To delete data after stopping Milvus, run:
+```
+sudo rm -rf  volumes
+```
+
+## What's next
+
+Having installed Milvus, you can:
+- Check [Hello Milvus](example_code.md) to run an example code with different SDKs to see what Milvus can do.
+- Check [In-memory Index](index.md) for more about CPU-compatible index types.
+- Learn the basic operations of Milvus:
+  - [Connect to Milvus server](manage_connection.md)
+  - [Manage Databases](manage_databases.md)
+  - [Create a collection](create_collection.md)
+  - [Create a partition](create_partition.md)
+  - [Insert data](insert_data.md)
+  - [Conduct a vector search](search.md)
+- Explore [Milvus Backup](milvus_backup_overview.md), an open-source tool for Milvus data backups.
+- Explore [Birdwatcher](birdwatcher_overview.md), an open-source tool for debugging Milvus and dynamic configuration updates.
+- Explore [Attu](https://milvus.io/docs/attu.md), an open-source GUI tool for intuitive Milvus management.
+- [Monitor Milvus with Prometheus](monitor.md)

site/en/getstarted/with_gpu/install_standalone-helm-gpu.md

@@ -1,6 +1,6 @@
 ---
 id: install_standalone-helm-gpu.md
-label: Standalone
+label: Standalone (Helm)
 order: 0
 group: install_standalone-helm-gpu.md
 related_key: Docker