Dev

Scenarios/AzSHCI Deployment 22H2 Edition/LabConfig.ps1

@@ -1,6 +1,6 @@
 $LabConfig=@{AllowedVLANs="1-10,711-719" ; DomainAdminName='LabAdmin'; AdminPassword='LS1setup!' ; DCEdition='4'; Internet=$true ; TelemetryLevel='Full' ; TelemetryNickname='' ; AdditionalNetworksConfig=@(); VMs=@()}
 
-#Azure Stack HCI 21H2
+#Azure Stack HCI 22H2
 1..4 | ForEach-Object {$LABConfig.VMs += @{ VMName = "AzSHCI$_" ; Configuration = 'S2D' ; ParentVHD = 'AzSHCI22H2_G2.vhdx' ; HDDNumber = 4 ; HDDSize= 2TB ; MemoryStartupBytes= 1GB; VMProcessorCount=4 ; vTPM=$true}}
 #Or with nested virtualization enabled
 #1..4 | ForEach-Object {$LABConfig.VMs += @{ VMName = "AzSHCI$_" ; Configuration = 'S2D' ; ParentVHD = 'AzSHCI22H2_G2.vhdx' ; HDDNumber = 4 ; HDDSize= 2TB ; MemoryStartupBytes= 4GB; VMProcessorCount=4 ; vTPM=$true ; NestedVirt=$true}}

Scenarios/AzSHCI Deployment 22H2 Edition/Scenario.ps1

@@ -171,9 +171,9 @@
         }
     }
     #define and install other features
-    $features="Failover-Clustering","RSAT-Clustering-PowerShell","Hyper-V-PowerShell","NetworkATC","NetworkHUD","Data-Center-Bridging","RSAT-DataCenterBridging-LLDP-Tools","FS-SMBBW"
-    #optional - affects perf even if not enabled on volumes as filter driver is attached (Bitlocker,SR,Dedup)
-    #$features+="RSAT-Feature-Tools-BitLocker","Storage-Replica","RSAT-Storage-Replica","FS-Data-Deduplication","System-Insights","RSAT-System-Insights"
+    $features="Failover-Clustering","RSAT-Clustering-PowerShell","Hyper-V-PowerShell","NetworkATC","NetworkHUD","Data-Center-Bridging","RSAT-DataCenterBridging-LLDP-Tools","FS-SMBBW","System-Insights","RSAT-System-Insights"
+    #optional - affects perf even if not enabled on volumes as filter driver is attached (SR,Dedup) and also Bitlocker, that affects a little bit
+    #$features+="Storage-Replica","RSAT-Storage-Replica","FS-Data-Deduplication","BitLocker","RSAT-Feature-Tools-BitLocker"
     Invoke-Command -ComputerName $servers -ScriptBlock {Install-WindowsFeature -Name $using:features}
 #endregion
 
@@ -823,6 +823,10 @@ if ($NetATC){
 
             #check number of live migrations
             get-vmhost -CimSession $Servers | Select-Object Name,MaximumVirtualMachineMigrations
+
+            #check it in cluster (is only 1 - expected)
+            get-cluster -Name $ClusterName | Select-Object Name,MaximumParallelMigrations
+
         #endregion
 
         #remove net intent global overrides if necessary

Scenarios/AzSHCI and AVD/Scenario.ps1

@@ -392,7 +392,7 @@
     #Copy agent and bootloader to VMs
         #create sessions
         $sessions=New-PSSession -ComputerName $VMs.VMName
-        #copy ARC agent
+        #copy AVD agent
         foreach ($session in $sessions){
             Copy-Item -Path "$env:USERPROFILE\Downloads\AVDAgent.msi" -Destination "$env:USERPROFILE\Downloads\" -tosession $session -force
             Copy-Item -Path "$env:USERPROFILE\Downloads\AVDAgentBootloader.msi" -Destination "$env:USERPROFILE\Downloads\" -tosession $session -force

Scenarios/AzSHCI and Dell Servers Update/Scenario.ps1

@@ -279,9 +279,17 @@ if ($offline){
 
 #region apply updates on nodes
     foreach ($Node in $Nodes){
-        #make sure there is no maintenance mode
-        Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Disabling maintenance mode - if there is any"
-        Get-StorageFaultDomain -Type StorageScaleUnit -CimSession $ClusterName | Disable-StorageMaintenanceMode -CimSession $ClusterName
+        #make sure all nodes are up
+        Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') Make sure all nodes are up"
+        $NodesNotUp=Get-ClusterNode -Cluster $ClusterName | Where-Object state -ne up
+        if ($NodesNotUp){
+            Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') Some nodes were not up, resuming : $($NodesNotUp.Name)"
+            $NodesNotUp | Resume-ClusterNode -Failback Immediate | Out-Null
+            if (Get-ClusterNode -Cluster $ClusterName | Where-Object state -ne up){
+                Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') Resuming nodes failed. Interrupting"
+                break
+            }
+        }
 
         #check for repair jobs, if found, wait until finished
         Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Waiting for Storage jobs to finish"
@@ -368,21 +376,23 @@ if ($offline){
                     $MSUpdateInstallResult=$Null
                 }
             }
+        }else{
+            Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Skipping Microsoft Updates as requested"
         }
 
         #Suspend node
         Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Suspending Cluster Node"
-        Suspend-ClusterNode -Name "$Node" -Cluster $ClusterName -Drain -Wait | Out-Null
+        Suspend-ClusterNode -Name "$Node" -Cluster $ClusterName -Drain -Wait -ErrorAction Ignore | Out-Null
 
         if (Get-ClusterResource -Cluster $ClusterName | Where-Object OwnerNode -eq $Node | Where-Object State -eq "Online"){
             Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Suspending Cluster Node Failed. Resuming and terminating patch run"
             Resume-ClusterNode -Name "$Node" -Cluster $ClusterName -Failback Immediate | Out-Null
             break
         }
 
-        #enable storage maintenance mode
-        Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Enabling Storage Maintenance mode"
-        Get-StorageFaultDomain -CimSession $ClusterName -FriendlyName $Node | Enable-StorageMaintenanceMode -CimSession $ClusterName
+        #enable storage maintenance mode (not needed as node goes to maintenance mode when suspended)
+        #Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Enabling Storage Maintenance mode"
+        #Get-StorageFaultDomain -CimSession $ClusterName -FriendlyName $Node | Enable-StorageMaintenanceMode -CimSession $ClusterName
 
         #Install Dell updates https://dl.dell.com/content/manual36290092-dell-emc-system-update-version-1-9-3-0-user-s-guide.pdf?language=en-us&ps=true
         #assuming dell updates might interrupt server, therefore it's done during maintenance mode
@@ -401,11 +411,13 @@ if ($offline){
                     }
                 }
             }
+        }else{
+            Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Skipping Dell Updates as requested"
         }
 
         #Check if reboot is required and reboot
         if (($Compliance | Where-Object {$_.NodeName -eq $Node -and $_.rebootrequired -eq $True}) -or ($Scanresult | Where-Object ($_.ComputerName -eq $node -and $_.MicrosoftUpdateRequired -eq $True)) -or ($ForceReboot -eq $True)){
-            Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Reboot is required"
+            Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Reboot is requested"
             #restart node and wait for PowerShell to come up (with powershell 7 you need to wait for WINRM :)
             Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Restarting Cluster Node"
             Restart-Computer -ComputerName $Node -Protocol WSMan -Wait -For PowerShell -Force | Out-Null
@@ -417,9 +429,9 @@ if ($offline){
             Start-Sleep 5
         }while($state -ne "Paused")
 
-        #disable storage maintenance mode
-        Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Disabling Storage Maintenance mode"
-        Get-StorageFaultDomain -Type StorageScaleUnit -CimSession $Node | Where-Object FriendlyName -eq $Node | Disable-StorageMaintenanceMode -CimSession $Node
+        #disable storage maintenance mode (not needed as node resumes from maintenance mode when resumed)
+        #Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Disabling Storage Maintenance mode"
+        #Get-StorageFaultDomain -Type StorageScaleUnit -CimSession $Node | Where-Object FriendlyName -eq $Node | Disable-StorageMaintenanceMode -CimSession $Node
 
         #resume cluster node
         Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Resuming Cluster Node"
@@ -430,6 +442,12 @@ if ($offline){
         do {Start-Sleep 5}while(
             Get-CimInstance -CimSession $Nodes -Namespace root\virtualization\v2 -ClassName Msvm_MigrationJob | Where-Object StatusDescriptions -eq "Job is running"
         )
+
+        #wait for node to resume from maintenance mode
+        Write-Output "$(get-date -Format 'yyyy/MM/dd hh:mm:ss tt') $($Node): Waiting for node to resume from Maintenance mode"
+        do {Start-Sleep 5}while(
+            Get-StorageFaultDomain -CimSession $Node | Where-Object OperationalStatus -eq "In Maintenance Mode"
+        )
     }
 
     #cleanup updates folder on nodes

Scenarios/AzSHCI and Deployment tool/LabConfig.ps1

@@ -2,9 +2,9 @@ $LabConfig=@{AllowedVLANs="1-10,711-719" ; DomainAdminName='LabAdmin'; AdminPass
 
 #Azure Stack HCI 22H2
 #labconfig will not domain join VMs, will add "Tools disk" and will also execute powershell command to make this tools disk online.
-1..4 | ForEach-Object {$LABConfig.VMs += @{ VMName = "ASNode$_" ; Configuration = 'S2D' ; ParentVHD = 'AzSHCI22H2_G2.vhdx' ; HDDNumber = 4 ; HDDSize= 2TB ; MemoryStartupBytes= 1GB; VMProcessorCount=4 ; vTPM=$true ; AddToolsVHD=$True ; Unattend="NoDjoin" }}
+1..4 | ForEach-Object {$LABConfig.VMs += @{ VMName = "ASNode$_" ; Configuration = 'S2D' ; ParentVHD = 'AzSHCI23H2_G2.vhdx' ; HDDNumber = 4 ; HDDSize= 2TB ; MemoryStartupBytes= 1GB; VMProcessorCount=4 ; vTPM=$true ; Unattend="NoDjoin" }}
 #labconfig for nested virtualization
-#1..4 | ForEach-Object {$LABConfig.VMs += @{ VMName = "ASNode$_" ; Configuration = 'S2D' ; ParentVHD = 'AzSHCI22H2_G2.vhdx' ; HDDNumber = 4 ; HDDSize= 2TB ; MemoryStartupBytes= 6GB; VMProcessorCount=4 ; vTPM=$true ; AddToolsVHD=$True ; Unattend="NoDjoin" ; NestedVirt=$true }}
+#1..4 | ForEach-Object {$LABConfig.VMs += @{ VMName = "ASNode$_" ; Configuration = 'S2D' ; ParentVHD = 'AzSHCI23H2_G2.vhdx' ; HDDNumber = 4 ; HDDSize= 2TB ; MemoryStartupBytes= 6GB; VMProcessorCount=4 ; vTPM=$true ; Unattend="NoDjoin" ; NestedVirt=$true }}
 
 #Windows Admin Center in GW mode
 $LabConfig.VMs += @{ VMName = 'WACGW' ; ParentVHD = 'Win2022Core_G2.vhdx'; MGMTNICs=1}