v1.0.4

Version: 1.0.4
Previous Version: 1.0.3
Description: Maintenance release

Changes:

• PTP end-to-end transparent clock is enabled as system default.

Fixes:

• APPL4092 : Payload of UDP (but not PTP) fragment packets will be updated when end-to-end TC is enabled.

• SF00792738 : SGMII Auto-Negotiation mode (Clause 37 of the IEEE Specification 802.3z) doesn't work

Known Issues:

• Spirent TestCenter fiber port will always advertise the 'Flow Control' capability under the Auto-Negotiation mode, therefore we cannot test the flow control disabled feature with it. (It is fine with Spirent Smartbits SMB-6000C)

v1.0.3

Version: 1.0.3
Previous Version: 1.0.1
Description: Maintenance release

Changes:

• Change:
  1.Use switch chip default watermark setting of the queue system by not calling _ferret_buf_conf_set().
  2.Enhanced port reset procedure, _ferret_port_reset().
  3.End-to-End transparent clock (PTP function) is disabled as system default.
  4.Updated License.
• Add:
  1.“CONFIG MAC” command to change "System MAC address" and “CONFIG SAVE” to write the change to flash (2M Bytes density is required)
• Fix:
  1.Port statistics clear command “H” cannot clear the last user port.

Known Issues:

1. the TestCenter fiber port will always advertise the 'Flow Control' capability
   under the ANEG mode. Therefore we cannot test the flow control disabled feature
   when connected with the TestCenter. (It works with SmartBits 6000C)