Initial version from Gist

Signed-off-by: Michael Pratt <[email protected]>

chip.py

@@ -0,0 +1,51 @@
+import board as FTDI
+import busio as Serial
+import digitalio as GPIO
+import time
+
+
+# Variables
+
+CS_pin = FTDI.D7
+
+baudrate = 10000000
+
+
+# Constants
+
+command = 0x9f
+
+length = 8
+
+
+# instantiation, unlock and configure pin and frequency
+
+response = [0] * length
+
+FT232H = Serial.SPI(FTDI.SCLK, FTDI.MOSI, FTDI.MISO)
+
+CS = GPIO.DigitalInOut(CS_pin)
+CS.direction = GPIO.Direction.OUTPUT
+
+while not FT232H.try_lock(): pass
+
+FT232H.configure(baudrate)
+
+
+# main
+
+CS.value = False
+
+FT232H.write_readinto([command], response)
+
+CS.value = True
+
+
+time.sleep(0.1)
+FT232H.unlock()
+
+
+for i in range(length):
+    response[i] = hex(response[i])
+
+print(response)

erasechip.py

@@ -0,0 +1,256 @@
+import board as FTDI
+import busio as Serial
+import digitalio as GPIO
+import time
+
+
+
+# Variables
+
+erase_type = 'chip'
+
+block_start = 50
+
+numblocks = 5
+
+sector_start = 50
+
+numsectors = 50
+
+
+
+# Configuration
+
+CS_pin = FTDI.D7
+
+baudrate = 40000000
+
+
+
+# Constants
+
+chip = 0xc7
+
+block = 0xd8
+
+sector = 0x20
+
+disable = 0x04
+
+status = 0x05
+
+enable = 0x06
+
+page_start = 0x00
+
+page_offset = 0x00
+
+lenpages = numpages = 0x100
+
+block_sectors = 0x10
+
+s_write = 0.005
+
+s_latch = 0.015
+
+
+
+# instantiation, lock board for use, configure frequency, set CS pin
+
+FT232H = Serial.SPI(FTDI.SCLK, FTDI.MOSI, FTDI.MISO)
+
+while not FT232H.try_lock(): pass
+
+FT232H.configure(baudrate)
+
+CS = GPIO.DigitalInOut(CS_pin)
+CS.direction = GPIO.Direction.OUTPUT
+
+response = [0]
+erasenum = 0
+busy = 0
+
+
+
+
+# main
+
+
+
+if erase_type == 'chip':
+    command = chip
+    if input(''.join(['will erase entire chip',
+            '...continue? (y/n):  '])) != 'y':
+        quit()
+    block_start = sector_start = 0
+    block_sectors = last_sectors = numsectors = numblocks = 1
+elif erase_type == 'block':
+    command = block
+    if input(''.join(['will erase ', str(numblocks), ' block(s) ',
+            'starting at block ', str(block_start), ' sector 0',
+            '...continue? (y/n):  '])) != 'y':
+        quit()
+    sector_start = 0
+    block_sectors = last_sectors = numsectors = 1
+elif erase_type == 'sector':
+    command = sector
+    if sector_start >= block_sectors:
+        block_start += sector_start // block_sectors
+        sector_start = sector_start % block_sectors
+    if input(''.join(['will erase ', str(numsectors), ' sector(s) ',
+            'starting at block ', str(block_start), ' sector ',
+            str(sector_start), '...continue? (y/n):  '])) != 'y':
+        quit()
+    if ((sector_start + numsectors) > block_sectors):
+        numblocks = ((sector_start + numsectors) // block_sectors) + 1
+        last_sectors = ((numsectors % block_sectors) + (block_sectors - (block_sectors - sector_start))) % block_sectors
+    else:
+        numblocks = 1
+        last_sectors = numsectors
+    numsectors = block_sectors - sector_start
+else:
+    print('check variables and try again')
+    quit()
+
+
+
+
+
+
+# erase cycle
+
+for blocknum in range(numblocks):
+
+
+    if blocknum > 0:
+        numsectors = block_sectors
+
+    if (numblocks - blocknum == 1):
+        numsectors = last_sectors
+
+    for sectornum in range(numsectors):
+
+
+        block = block_start + blocknum
+
+        if blocknum == 0:
+            sector = (sector_start + sectornum) * block_sectors
+        else:
+            sector = sectornum * block_sectors
+
+        instruction = [command, block, sector, page_offset]
+
+
+        # write enable
+
+        CS.value = False
+
+        FT232H.write([enable])
+
+        CS.value = True
+
+        time.sleep(s_latch)
+
+
+        # erase
+
+        if erase_type != 'chip':
+            print('erasing:', hex(block), format(sector, 'x'), format(page_offset, 'x'))
+        else:
+            instruction = [chip]
+            print('erasing whole chip...')
+
+        print(instruction)
+
+        CS.value = False
+
+        FT232H.write(instruction)
+
+        CS.value = True
+
+        time.sleep(s_write)
+
+        erasenum += 1
+
+
+
+        # check status
+
+        CS.value = False
+
+        FT232H.write([status])
+        FT232H.readinto(response)
+
+        CS.value = True
+
+        time.sleep(s_latch)
+
+        busy = sum(response)
+
+        while busy % 2 != 0:
+
+            print('erasing...')
+
+            response = [0]
+
+            CS.value = False
+
+            FT232H.write([status])
+            FT232H.readinto(response)
+
+            CS.value = True
+
+            time.sleep(1)
+
+            busy = sum(response)
+
+            response[0] = hex(response[0])
+
+            print('status register 1 : ', response)
+            print('status register 1 sum : ', busy)
+
+
+
+
+# write disable
+
+time.sleep(s_latch)
+
+CS.value = False
+
+FT232H.write([disable])
+
+CS.value = True
+
+
+
+# read status register
+
+time.sleep(s_latch)
+
+CS.value = False
+
+FT232H.write([status])
+FT232H.readinto(response)
+
+CS.value = True
+
+time.sleep(s_latch)
+
+
+busy = sum(response)
+
+response[0] = hex(response[0])
+
+print('\n\nfinal status:\n')
+
+print('status register 1 : ', response)
+print('status register 1 sum : ', busy)
+
+print('\nerased', erasenum, erase_type, '(s)')
+
+
+# Close
+
+FT232H.unlock()
+print('DONE')