Skip to content

Firmware for nordic MCUs used in the Redox wireless keyboard

License

Notifications You must be signed in to change notification settings

mattdibi/redox-w-firmware

Repository files navigation

Redox Wireless Keyboard Firmware

Firmware for Nordic MCUs used in the Redox wireless Keyboard, contains precompiled .hex files, as well as sources buildable with the Nordic SDK. This firmware was derived from Reversebias' Mitosis and Durburz's Interphase firmware.

Redox's documentation page

For additional information about the Redox keyboard visit:

Docker-based development environment installation

Requirements:

Build the two container images

From inside the redox-w-firmware folder run:

$ docker-compose build

After the process completes you should see three new images:

$ docker images
REPOSITORY           TAG       IMAGE ID       CREATED          SIZE
redox-fw-toolchain   latest    810de995238e   16 minutes ago   896MB
redox-fw-openocd     latest    173d86d1409c   18 minutes ago   168MB
ubuntu               16.04     8185511cd5ad   4 weeks ago      132MB

Run the two images using docker compose

After connecting the STLinkV2 debugger, from inside the redox-w-firmware folder run:

$ docker-compose up -d
Creating redox-w-firmware_openocd_1 ... done
Creating redox-w-firmware_toolchain_1 ... done

You should see the two containers running:

$ docker ps
CONTAINER ID   IMAGE                       COMMAND                  CREATED         STATUS         PORTS     NAMES
84f606ad7e25   redox-fw-toolchain:latest   "tail -f /dev/null"      4 seconds ago   Up 3 seconds             redox-w-firmware_toolchain_1
8d0d6b5da95a   redox-fw-openocd:latest     "/bin/sh -c 'openocd…"   4 seconds ago   Up 3 seconds             redox-w-firmware_openocd_1

You can now start making changes in the code.

Build and upload the firmware

After you're satisfied with your changes you can build and upload the firmware by issuing the following:

$ docker exec -it redox-w-firmware_toolchain_1 ./redox-w-firmware/redox-w-receiver-basic/program.sh
$ docker exec -it redox-w-firmware_toolchain_1 ./redox-w-firmware/redox-w-keyboard-basic/program_right.sh
$ docker exec -it redox-w-firmware_toolchain_1 ./redox-w-firmware/redox-w-keyboard-basic/program_left.sh

Stop the containers

To stop the two running containers, from inside the redox-w-firmware folder run:

$ docker-compose down
Stopping redox-w-firmware_toolchain_1 ... done
Stopping redox-w-firmware_openocd_1   ... done
Removing redox-w-firmware_toolchain_1 ... done
Removing redox-w-firmware_openocd_1   ... done

Native development environment installation

Tested on Ubuntu 16.04.2, but should be able to find alternatives on all distros.

$ sudo apt install openocd gcc-arm-none-eabi

Download Nordic SDK

Nordic does not allow redistribution of their SDK or components, so download and extract from their site:

https://developer.nordicsemi.com/nRF5_SDK/nRF5_SDK_v11.x.x/nRF5_SDK_11.0.0_89a8197.zip

Firmware written and tested with version 11

$ unzip nRF5_SDK_11.0.0_89a8197.zip -d nRF5_SDK_11
$ cd nRF5_SDK_11

Toolchain set-up

A cofiguration file that came with the SDK needs to be changed. Assuming you installed gcc-arm with apt, the compiler root path needs to be changed in /components/toolchain/gcc/Makefile.posix, the line:

$ GNU_INSTALL_ROOT := /usr/local/gcc-arm-none-eabi-4_9-2015q1

Replaced with:

$ GNU_INSTALL_ROOT := /usr/

Clone repository

Inside nRF5_SDK_11/

$ git clone https://github.com/mattdibi/redox-w-firmware

Install udev rules

$ sudo cp redox-w-firmware/49-stlinkv2.rules /etc/udev/rules.d/

Plug in, or replug in the programmer after this.

OpenOCD server

The programming header on the side of the keyboard:

Redox-programming-headers

It's best to remove the battery during long sessions of debugging, as charging non-rechargeable lithium batteries isn't recommended.

Launch a debugging session with:

$ openocd -s /usr/local/Cellar/open-ocd/0.8.0/share/openocd/scripts/ -f interface/stlink-v2.cfg -f target/nrf51_stlink.tcl

Should give you an output ending in:

Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints

Otherwise you likely have a loose or wrong wire.

Manual programming

From the factory, these chips need to be erased:

$ echo reset halt | telnet localhost 4444
$ echo nrf51 mass_erase | telnet localhost 4444

From there, the precompiled binaries can be loaded:

$ echo reset halt | telnet localhost 4444
$ echo flash write_image `readlink -f precompiled-basic-left.hex` | telnet localhost 4444
$ echo reset | telnet localhost 4444

Automatic make and programming scripts

To use the automatic build scripts:

  • keyboard-left: ./redox-w-keyboard-basic/program_left.sh
  • keyboard-right: ./redox-w-keyboard-basic/program_right.sh
  • receiver: ./redox-w-receiver-basic/program.sh

An openocd session should be running in another terminal, as this script sends commands to it.

About

Firmware for nordic MCUs used in the Redox wireless keyboard

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published