Replaced deprecated set-output

v2 switches to openvpn CLI for stability

Example.ovpn

The following settings must be passed as environment variables as shown in the example.

The following settings must be passed as environment variables as shown in the example.

Boolean Can get status after connect true or false.

  connect-open-vpn:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v1
      - name: Install Open VPN
        run: sudo apt-get install openvpn
      - name: Connect VPN
        uses: golfzaptw/action-connect-ovpn@master
        id: connect_vpn
        with:
          PING_URL: '127.0.0.1'
          FILE_OVPN: '.github/vpn/config.ovpn'
          SECRET: ${{ secrets.SECRET_USERNAME_PASSWORD }}
          TLS_KEY: ${{ secrets.TLS_KEY }}
        env:
          CA_CRT: ${{ secrets.CA_CRT}}
          USER_CRT: ${{ secrets.USER_CRT }}
          USER_KEY: ${{ secrets.USER_KEY }}
      - name: Check Connect VPN
        run: echo ${{ steps.connect_vpn.outputs.STATUS }}
      - name: kill vpn
        if: always()
        run: sudo killall openvpn

1. Copy the data inside the tags <ca></ca> <cert></cert> <key></key> and encode those values to base64. Then save those values (without a new line!) to the secrets in github actions

2. In the .ovpn file in your repo, remove the tags <ca></ca> <cert></cert> <key></key> and replace the values with

ca ca.crt
cert user.crt
key user.key

This will allow the values to be filled in from Github secrets.

3. If your open vpn configuration has a username and password please encode those in base64. After that, save the values in the github actions secrets. format username password username-vpn password-vpn

4. If open vpn have tag <tls></tls> please repeat step 1 and 2 for the TLS records.