mainsail-crew · KwadFan · Nov 21, 2022 · Oct 22, 2022 · Oct 22, 2022 · Oct 22, 2022
diff --git a/config/raspberry/default b/config/raspberry/default
@@ -4,7 +4,7 @@
 # Declare Variables before exporting.
 # See https://www.shellcheck.net/wiki/SC2155
 
-BASE_IMAGE_ENLARGEROOT=2500
+BASE_IMAGE_ENLARGEROOT=3000
 BASE_IMAGE_RESIZEROOT=600
 # Compress not needed due compression done in workflow
 BASE_RELEASE_COMPRESS=no

diff --git a/src/modules/crowsnest/config b/src/modules/crowsnest/config
@@ -2,27 +2,33 @@
 #### crowsnest - A webcam Service for multiple Cams and Stream Services.
 ####
 #### Written by Stephan Wendel aka KwadFan <[email protected]>
-#### Copyright 2021
+#### Copyright 2021 - 2022
 #### https://github.com/mainsail-crew/crowsnest
 ####
 #### This File is distributed under GPLv3
 ####
 # shellcheck disable=all
 
-# crowsnest
-[ -n "$CROWSNEST_CROWSNEST_REPO_SHIP" ] || CROWSNEST_CROWSNEST_REPO_SHIP=https://github.com/mainsail-crew/crowsnest.git
-[ -n "$CROWSNEST_CROWSNEST_REPO_BRANCH" ] || CROWSNEST_CROWSNEST_REPO_BRANCH=master
-[ -n "$CROWSNEST_CROWSNEST_DEPS" ] || CROWSNEST_CROWSNEST_DEPS="git crudini bsdutils findutils v4l-utils ffmpeg"
-[ -n "$CROWSNEST_DEFAULT_CONF" ] || CROWSNEST_DEFAULT_CONF="mainsail_default.conf"
-[ -n "$CROWSNEST_DEFAULT_CONF_DIR" ] || CROWSNEST_DEFAULT_CONF_DIR="/home/${BASE_USER}/klipper_config"
-# Force Raspicam fix bool (1:yes / 0:no)
-[ -n "$CROWSNEST_FORCE_RASPICAMFIX" ] || CROWSNEST_FORCE_RASPICAMFIX=1
-# Add Crowsnest to moonraker.conf (update manager) bool (1:yes / 0:no)
-[ -n "$CROWSNEST_ADD_CROWSNEST_MOONRAKER" ] || CROWSNEST_ADD_CROWSNEST_MOONRAKER=1
+# crowsnest repo
+[[ -n "$CROWSNEST_REPO_SHIP" ]] || CROWSNEST_REPO_SHIP="https://github.com/mainsail-crew/crowsnest.git"
+[[ -n "$CROWSNEST_REPO_BRANCH" ]] || CROWSNEST_REPO_BRANCH="master"
+
+# crowsnest setup
+[[ -n "$CROWSNEST_DEFAULT_CONF" ]] || CROWSNEST_DEFAULT_CONF="resources/crowsnest.conf"
+[[ -n "$CROWSNEST_CONFIG_PATH" ]] || CROWSNEST_CONFIG_PATH="/home/pi/printer_data/config"
+[[ -n "$CROWSNEST_LOG_PATH" ]] || CROWSNEST_LOG_PATH="/home/pi/printer_data/logs"
+[[ -n "$CROWSNEST_ENV_PATH" ]] || CROWSNEST_ENV_PATH="/home/pi/printer_data/systemd"
+[[ -n "$CROWSNEST_RASPICAMFIX" ]] || CROWSNEST_RASPICAMFIX="1"
+[[ -n "$CROWSNEST_ADD_CROWSNEST_MOONRAKER" ]] || CROWSNEST_ADD_CROWSNEST_MOONRAKER="1"
+[[ -n "$CROWSNEST_MOONRAKER_CONF_PATH" ]] || CROWSNEST_MOONRAKER_CONF_PATH="/home/pi/printer_data/config/moonraker.conf"
 
 
 # ustreamer
-[ -n "$CROWSNEST_USTREAMER_DEPS" ] || CROWSNEST_USTREAMER_DEPS="git build-essential libevent-dev libjpeg-dev \
-libbsd-dev libraspberrypi-dev libgpiod-dev"
-[ -n "$CROWSNEST_USTREAMER_WITH_OMX" ] || CROWSNEST_USTREAMER_WITH_OMX="y"
-[ -n "$CROWSNEST_USTREAMER_WITH_GPIO" ] || CROWSNEST_USTREAMER_WITH_GPIO="n"
+[[ -n "$CROWSNEST_USTREAMER_REPO_SHIP" ]] || CROWSNEST_USTREAMER_REPO_SHIP="https://github.com/pikvm/ustreamer.git"
+[[ -n "$CROWSNEST_USTREAMER_REPO_BRANCH" ]] || CROWSNEST_USTREAMER_REPO_BRANCH="master"
+
+###########################################################################
+### DO NOT EDIT BELOW THIS LINE, UNLESS YOU KNOW EXACTLY WHAT HAPPENDS! ###
+###########################################################################
+
+CROWSNEST_UNATTENDED="1"
diff --git a/src/modules/crowsnest/start_chroot_script b/src/modules/crowsnest/start_chroot_script
@@ -9,41 +9,72 @@
 #### This File is distributed under GPLv3
 ####
 
-# shellcheck disable=all
+# shellcheck enable=requires-variable-braces
 
 # Error handling
 set -Ee
 
+# shellcheck disable=SC1091
 source /common.sh
 install_cleanup_trap
 
-echo_green "Installing crowsnest and enable webcam Service ..."
-# install dependencies
-# force apt update
-apt update
-# It could use inbuilt dependencie check, but should speed up if preinstalled.
-# shellcheck disable=SC2086
-check_install_pkgs ${CROWSNEST_CROWSNEST_DEPS} ${CROWSNEST_USTREAMER_DEPS}
-# Move to $HOME dir
+# Module only Variables
+CN_BUILD_PACKAGE_FILE="/tmp/cn_packages.lst"
+CN_BUILD_INSTALL_SH="/home/${BASE_USER}/crowsnest/tools/install.sh"
+
+echo_green "Installing crowsnest ..."
+
+## Force apt update
+apt-get update
+## Make sure 'git' is installed!
+check_install_pkgs git
+
+## Step 1: Move to Home Dir as WorkingDirectoy
 pushd "/home/${BASE_USER}" &> /dev/null || exit 1
-    # make sure config folder exist
-    if [ ! -d "${CROWSNEST_DEFAULT_CONF_DIR}" ]; then
-        sudo -u "${BASE_USER}" mkdir -p "${CROWSNEST_DEFAULT_CONF_DIR}"
-    fi
-    # clone Repo
-    echo_green "Clone crowsnest repository ..."
-    gitclone CROWSNEST_CROWSNEST_REPO crowsnest
-    # install crowsnest - use crowsnest's make unattended
-    pushd "/home/${BASE_USER}/crowsnest" &> /dev/null || exit 1
-    echo_green "Launch crowsnest install routine ..."
-    pushd "/home/${BASE_USER}/crowsnest" &> /dev/null || exit 1
-    sudo -u "${BASE_USER}" make unattended
-    # Apply Raspicam fix if enabled.
-    if [ "${CROWSNEST_FORCE_RASPICAMFIX}" == "1" ]; then
-        echo -en "Applying Raspicam Fix ... \r"
-        sudo sh -c 'echo "bcm2835-v4l2" >> /etc/modules'
-        sudo cp file_templates/bcm2835-v4l2.conf /etc/modprobe.d/
-        echo -e "Applying Raspicam Fix ... [OK]"
-    fi
-    popd &> /dev/null || exit 1
+
+## Step 2: clone crowsnest repo
+echo_green "Clone crowsnest repository ..."
+gitclone CROWSNEST_REPO crowsnest
+
+## Step 3: grep PKGLIST from install.sh for dependencies
+echo_green "Generating packages file ..."
+grep "PKGLIST=" "${CN_BUILD_INSTALL_SH}" >> "${CN_BUILD_PACKAGE_FILE}"
+
+## Step 4: Rename PKGLIST to Module usable Var
+echo_green "Rename variable PKGLIST to CROWSNEST_DEPS ..."
+sed -i 's/PKGLIST/CROWSNEST_DEPS/g' "${CN_BUILD_PACKAGE_FILE}"
+
+## Step 5: Source cn_package.lst file
+# shellcheck disable=SC1090
+# Shellcheck has to be disabled here,
+# because it is an dynamic generated file and not checkable
+. "${CN_BUILD_PACKAGE_FILE}"
+
+## Step 6: Install packages
+echo_green "Install crowsnest dependencies ..."
+# shellcheck disable=SC2086
+# disabled because we need 'wordsplitting'
+check_install_pkgs ${CROWSNEST_DEPS}
+
+## Step 7: Move to crowsnest as working directory
+pushd "/home/${BASE_USER}/crowsnest" &> /dev/null || exit 1
+
+## Step 8: Run crowsnest install routine
+echo_green "Launch crowsnest install routine ..."
+make install
+
+## Step 9: Leave crowsnest
 popd &> /dev/null || exit 1
+
+## Step 10: clean packages.lst file
+rm -f "${CN_BUILD_PACKAGE_FILE}"
+
+## Step 11: leave home dir
+popd &> /dev/null || exit 1
+
+## Step 12:
+echo_green "Enable crowsnest.service ..."
+systemctl_if_exists enable crowsnest.service
+
+## Finish
+echo_green "Installing crowsnest ... DONE!"
diff --git a/src/modules/is_req_preinstall/config b/src/modules/is_req_preinstall/config
@@ -2,6 +2,6 @@
 # shellcheck disable=all
 [ -n "$IS_REQ_PREINSTALL_VENV_DIR" ] || IS_REQ_PREINSTALL_VENV_DIR=/home/${BASE_USER}/klippy-env
 [ -n "$IS_REQ_PREINSTALL_DEPS" ] || IS_REQ_PREINSTALL_DEPS="python3-numpy python3-matplotlib \
-libatlas3-base libatlas-base-dev"
-[ -n "$IS_REQ_PREINSTALL_PIP" ] || IS_REQ_PREINSTALL_PIP="numpy<=1.21.4"
+libatlas3-base libatlas-base-dev libgfortran5"
+[ -n "$IS_REQ_PREINSTALL_PIP" ] || IS_REQ_PREINSTALL_PIP="numpy<=1.23.4"
 [ -n "$IS_REQ_PREINSTALL_CFG_FILE" ] || IS_REQ_PREINSTALL_CFG_FILE="/boot/config.txt"
diff --git a/src/modules/is_req_preinstall/start_chroot_script b/src/modules/is_req_preinstall/start_chroot_script
@@ -19,7 +19,7 @@ set -Eex
 export LC_ALL=C
 
 # Set DEBIAN_FRONTEND to noninteractive
-if [ "${DEBIAN_FRONTEND}" != "noninteractive" ]; then
+if [[ "${DEBIAN_FRONTEND}" != "noninteractive" ]]; then
     export DEBIAN_FRONTEND=noninteractive
 fi
 
@@ -41,7 +41,7 @@ check_install_pkgs ${IS_REQ_PREINSTALL_DEPS}
 
 ### Check for Klipper Venv installed.
 pushd "/home/${BASE_USER}" &> /dev/null || exit 1
-if [ -d "${IS_REQ_PREINSTALL_VENV_DIR}" ] && [ -x "${IS_REQ_PREINSTALL_VENV_DIR}/bin/pip" ]; then
+if [[ -d "${IS_REQ_PREINSTALL_VENV_DIR}" ]] && [[ -x "${IS_REQ_PREINSTALL_VENV_DIR}/bin/pip" ]]; then
     echo_green "Installing numpy..."
     sudo -u "${BASE_USER}" "${IS_REQ_PREINSTALL_VENV_DIR}"/bin/pip install -v "${IS_REQ_PREINSTALL_PIP}"
 else

diff --git a/src/modules/klipper/config b/src/modules/klipper/config
@@ -1,17 +1,31 @@
-#!/bin/bash
+#!/usr/bin/env bash
 # shellcheck disable=all
-[ -n "$KLIPPER_SRC_DIR" ] || KLIPPER_SRC_DIR=/home/${BASE_USER}/klipper
-[ -n "$KLIPPER_PYTHON_DIR" ] || KLIPPER_PYTHON_DIR=/home/${BASE_USER}/klippy-env
+#### klipper module
+####
+#### Based on work of:
+#### Raymond Himle and meteyou (Stefan Dej)
+####
+#### Written by Stephan Wendel aka KwadFan <[email protected]>
+#### Copyright 2021 - 2022
+#### https://github.com/mainsail-crew/MainsailOS
+####
+#### This File is distributed under GPLv3
+####
+#### Credits: Thanks to KevinOConnor for this great Firmware :)
 
-[ -n "$KLIPPER_REPO_SHIP" ] || KLIPPER_REPO_SHIP=https://github.com/Klipper3d/klipper.git
-[ -n "$KLIPPER_REPO_BRANCH" ] || KLIPPER_REPO_BRANCH=master
-[ -n "$KLIPPER_DEPS" ] || KLIPPER_DEPS="wget git gpiod \
-virtualenv python3-dev python3-matplotlib \
-libffi-dev build-essential \
-libncurses-dev libusb-dev \
-avrdude gcc-avr binutils-avr avr-libc \
-stm32flash dfu-util libnewlib-arm-none-eabi \
-gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0-0"
-[ -n "$KLIPPER_USER_GROUPS" ] || KLIPPER_USER_GROUPS=tty,dialout
-[ -n "$KLIPPER_USER_DIRS" ] || KLIPPER_USER_DIRS="klipper_config klipper_logs gcode_files"
-[ -n "$KLIPPER_PYENV_REQ" ] || KLIPPER_PYENV_REQ=scripts/klippy-requirements.txt
+[ -n "$KLIPPER_SRC_DIR" ] || KLIPPER_SRC_DIR="/home/${BASE_USER}/klipper"
+[ -n "$KLIPPER_PYTHON_DIR" ] || KLIPPER_PYTHON_DIR="/home/${BASE_USER}/klippy-env"
+
+[ -n "$KLIPPER_REPO_SHIP" ] || KLIPPER_REPO_SHIP="https://github.com/Klipper3d/klipper.git"
+[ -n "$KLIPPER_REPO_BRANCH" ] || KLIPPER_REPO_BRANCH="master"
+[ -n "$KLIPPER_DEPS" ] || KLIPPER_DEPS="git virtualenv python3-dev \
+python3-matplotlib libffi-dev build-essential libncurses-dev libusb-dev \
+avrdude gcc-avr binutils-avr avr-libc stm32flash dfu-util libnewlib-arm-none-eabi \
+gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0-0 libusb-1.0-0-dev"
+
+[ -n "$KLIPPER_USER_GROUPS" ] || KLIPPER_USER_GROUPS="tty,dialout"
+
+[ -n "$KLIPPER_USER_DIRS" ] || KLIPPER_USER_DIRS="printer_data printer_data/config \
+printer_data/comms printer_data/logs"
+
+[ -n "$KLIPPER_PYENV_REQ" ] || KLIPPER_PYENV_REQ="scripts/klippy-requirements.txt"
diff --git a/src/modules/klipper/filesystem/home/pi/printer_data/systemd/klipper.env b/src/modules/klipper/filesystem/home/pi/printer_data/systemd/klipper.env
@@ -0,0 +1 @@
+KLIPPER_ARGS="/home/pi/klipper/klippy/klippy.py /home/pi/printer_data/config/printer.cfg -l /home/pi/printer_data/logs/klippy.log -I /home/pi/printer_data/comms/klippy.serial -a /home/pi/printer_data/comms/klippy.sock"
diff --git a/src/modules/klipper/filesystem/root/etc/systemd/system/klipper.service b/src/modules/klipper/filesystem/root/etc/systemd/system/klipper.service
@@ -1,7 +1,5 @@
-#Systemd Klipper Service
-
 [Unit]
-Description=Starts Klipper and provides klippy Unix Domain Socket API
+Description=Klipper 3D Printer Firmware SV1
 Documentation=https://www.klipper3d.org/
 After=network-online.target
 Before=moonraker.service
@@ -11,14 +9,12 @@ Wants=udev.target
 Alias=klippy
 WantedBy=multi-user.target
 
-
 [Service]
-Environment=KLIPPER_CONFIG=/home/pi/klipper_config/printer.cfg
-Environment=KLIPPER_LOG=/home/pi/klipper_logs/klippy.log
-Environment=KLIPPER_SOCKET=/tmp/klippy_uds
 Type=simple
 User=pi
 RemainAfterExit=yes
-ExecStart= /home/pi/klippy-env/bin/python /home/pi/klipper/klippy/klippy.py ${KLIPPER_CONFIG} -l ${KLIPPER_LOG}  -a ${KLIPPER_SOCKET}
+WorkingDirectory=/home/pi/klipper
+EnvironmentFile=/home/pi/printer_data/systemd/klipper.env
+ExecStart=/home/pi/klippy-env/bin/python $KLIPPER_ARGS
 Restart=always
 RestartSec=10
diff --git a/src/modules/klipper/start_chroot_script b/src/modules/klipper/start_chroot_script
@@ -1,6 +1,4 @@
 #!/usr/bin/env bash
-#### MainsailOS Build Chain
-####
 #### Klipper Install Module
 ####
 #### Based on work done by Raymond Himle and Stefan Dej
@@ -23,7 +21,7 @@ set -Eex
 export LC_ALL=C
 
 # Set DEBIAN_FRONTEND to noninteractive
-if [ "${DEBIAN_FRONTEND}" != "noninteractive" ]; then
+if [[ "${DEBIAN_FRONTEND}" != "noninteractive" ]]; then
     export DEBIAN_FRONTEND=noninteractive
 fi
 
@@ -58,7 +56,7 @@ gitclone KLIPPER_REPO klipper
 
 ## Create needed dirs
 for dir in ${KLIPPER_USER_DIRS}; do
-    if [ -d "/home/${BASE_USER}/$dir" ]; then
+    if [[ -d "/home/${BASE_USER}/${dir}" ]]; then
         echo_green "${dir} already exists!"
     else
         echo_green "Creating ${dir}"
@@ -67,6 +65,10 @@ for dir in ${KLIPPER_USER_DIRS}; do
 done
 popd &> /dev/null || exit 1
 
+# Copy printer_data for klipper/klippy
+echo_green "Copy files to 'printer_data' ..."
+unpack /filesystem/home/"${BASE_USER}" /home/"${BASE_USER}" "${BASE_USER}"
+
 ## create python virtualenv and install klipper requirements
 pushd "/home/${BASE_USER}" &> /dev/null || exit 1
 echo_green "Creating Virtualenv for Klipper (klippy-env) ..."
@@ -80,4 +82,4 @@ popd &> /dev/null || exit 1
 systemctl_if_exists enable klipper.service
 
 ## Done message
-echo_green "Installing Klipper and enable klippy Service ... done!"
+echo_green "Installing Klipper and enable klippy Service ..."
diff --git a/src/modules/mainsail/config b/src/modules/mainsail/config
@@ -1,2 +1,23 @@
-[ -n "$MAINSAIL_DEPS" ] || MAINSAIL_DEPS="nginx"
-[ -n "$MAINSAIL_URL" ] || MAINSAIL_URL=https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip
+#!/usr/bin/env bash
+# Shebang for better file detection
+#### mainsail module config
+####
+#### Based on work of:
+#### Raymond Himle and meteyou
+####
+#### Written by Stephan Wendel aka KwadFan <[email protected]>
+#### Copyright 2021 - 2022
+#### https://github.com/mainsail-crew/MainsailOS
+####
+#### This File is distributed under GPLv3
+####
+
+[[ -n "$MAINSAIL_DEPS" ]] || MAINSAIL_DEPS="nginx"
+[[ -n "$MAINSAIL_URL" ]] || MAINSAIL_URL=https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip
+
+# mainsail.cfg repo
+[[ -n "$MAINSAIL_CONFIG_REPO_SHIP" ]] || MAINSAIL_CONFIG_REPO_SHIP="https://github.com/mainsail-crew/mainsail-config.git"
+[[ -n "$MAINSAIL_CONFIG_REPO_BRANCH" ]] || MAINSAIL_CONFIG_REPO_BRANCH="master"
+# mainsail.cfg setup
+[[ -n "$MAINSAIL_CONFIG_SRC_PATH" ]] || MAINSAIL_CONFIG_SRC_PATH="/home/${BASE_USER}/mainsail-config/mainsail.cfg"
+[[ -n "$MAINSAIL_CONFIG_DEST_PATH" ]] || MAINSAIL_CONFIG_DEST_PATH="/home/${BASE_USER}/printer_data/config/mainsail.cfg"