Improve podtato head tutorial

website/docs/tutorials/overview.md

@@ -6,8 +6,8 @@ sidebar_label: Overview
 
 ---
 
-The Tutorials section offers hands-on guides for Litmus users to experiment with various tools and environments. This section does not cover the detailed installation steps, which can be found in the [Getting-started](../getting-started/installation.md) section.
+This section offers hands-on guides for Litmus users to experiment with various tools and environments. It does not cover any detailed installation guides, however, you can find them in the [Getting Started](../getting-started/installation.md) section.
 
 ### [Let's Start with Podtato-head](podtato-head.md)
 
-This tutorial guides users on how to inject a pod-delete fault into one of the pods in the [podtato-head](https://github.com/cncf/podtato-head) microservice and verify its availability during the chaos.
+A guide on injecting a pod-delete fault into a pod in the [podtato-head](https://github.com/cncf/podtato-head) microservice and test its availability during the chaos.

website/docs/tutorials/podtato-head.md

@@ -1,14 +1,12 @@
 ---
 id: podtato-head
-title: Let's Start with Podtato-head
-sidebar_label: Let's Start with Podtato-head
----
-
+title: Injecting a pod-delete fault into a Pod
+sidebar_label: Injecting a pod-delete fault into a Pod
 ---
 
 ![podtato-head](../assets/tutorials/podtato-head/podtato-head.png)
 
-In this tutorial, you will inject a pod-delete fault into the `podtato-head-hat` pod of the sample microservices application, [podtato-head](https://github.com/cncf/podtato-head), and check if the pod remains available during the chaos.
+A pod-delete fault is a fault injection experiment that intentionally deletes Kubernetes pods to test the resilience and self-healing capabilities of the system. In this tutorial, you will inject a pod-delete fault into the `podtato-head-hat` pod of the sample microservices application, [podtato-head](https://github.com/cncf/podtato-head), and check if the pod remains available during the chaos.
 
 ## What is Podtato-head?
 
@@ -18,61 +16,61 @@ In this tutorial, you will inject a pod-delete fault into the `podtato-head-hat`
 
 - Kubernetes 1.18 or later (minimum 2 vCPUs, 8GB RAM, 10GB disk space)
 - A Persistent volume of 20GB
-- [Kubectl](https://kubernetes.io/docs/tasks/tools/#kubectl)
+- [Kubectl](https://kubernetes.io/docs/tasks/tools/#kubectl) installed on your system
+- ChaosCenter installed on your system. You can follow the [Getting Started](../getting-started/installation.md) guide to install it.
 
-## Install Podtato-head
+## Step 1: Install Podtato-head
 
-1. Install `podtato-head` in the `podtato-kubectl` namespace using the manifest file, which also creates the namespace
+1. Run the command below to create a `podtato-kubectl` namespace and install `podtato-head` in it using the manifest file:
 
 ```bash
-kubectl apply -f https://github.com/podtato-head/podtato-head-app/releases/download/v0.3.3/manifest.yaml 
+kubectl apply -f https://github.com/podtato-head/podtato-head-app/releases/download/v0.3.3/manifest.yaml
 ```
 
-2. Add a label to the `podtato-head-hat` deployment
+2. Run the command below to label the `podtato-head-hat` deployment in the `podtato-kubectl` namespace:
 
 ```bash
 kubectl label deployment podtato-head-hat app=podtato-head-hat -n podtato-kubectl
 ```
 
-## Install ChaosCenter
-
-1. Follow the [Getting-started](../getting-started/installation.md) guide to install ChaosCenter
+Adding a label allows you to specifically target the pod during a Chaos experiment.
 
-2. Access the ChaosCenter Dashboard
+## Step 2: Set up Environment
 
-![chaoscenter-dashboard](../assets/tutorials/podtato-head/chaoscenter-dashboard.png)
+1. On your ChaosCenter dashboard, navigate to "**Environments**" and create a new environment with the following details:
 
-## Set up Environment
-
-1. Add a new environment
 - Environment Name: `local`
 - Environment Type: `Production`
 
-![local-environment](../assets/tutorials/podtato-head/local-environment.png)
+![chaos center create new environment page](../assets/tutorials/podtato-head/litmus-chaos-create-new-environment-page.png)
+
+## Step 3: Enable Chaos Infrastructure in your Environment
 
-## Enable Chaos Infrastructure
+1. Configure a new chaos infrastructure with the following details:
 
-1. Configure a new chaos infrastructure
 - Name: `local`
 - Chaos Components Installation: `Cluster-wide access`
 - Installation Location (Namespace): `litmus`
 - Service Account Name: `litmus`
 
-2. Deploy the new chaos infrastructure
+2. Deploy the new chaos infrastructure by running:
 
 ```bash
 kubectl apply -f local-litmus-chaos-enable.yml
 ```
 
-3. Wait until the status changes to `CONNECTED`.
+3. Wait until the status changes to `CONNECTED`
 
-![connected](../assets/tutorials/podtato-head/connected.png)
+![local environment showing connected status](../assets/tutorials/podtato-head/connected.png)
 
-## Set up Resilience Probe
+## Step 4: Set up Resilience Probe
+
+You need to set up a resilience probe to automatically verify whether the pod remains operational after a fault is injected. For this tutorial, you will use a command-based probe because it allows you to run a specific shell command that checks the status of the target resource (in this case, ensuring the podtato-head-hat pod is running).
 
 1. Select **CMD Probe** as the probe type
 
-2. Configure the probe properties and details
+2. Configure the probe properties and details with the following:
+
 - Name: `check-podtato-head-hat-pod`
 - Timeout: `10s`
 - Interval: `1s`
@@ -84,9 +82,10 @@ kubectl apply -f local-litmus-chaos-enable.yml
 
 ![setup-probe](../assets/tutorials/podtato-head/setup-probe.png)
 
-## Run Chaos Experiment
+## Step 5: Run Chaos Experiment
 
 1. Start a new chaos experiment
+
 - Name: `podtato-head`
 - Chaos Infrastructure: `local`
 - Builder Type: `Blank Canvas`
@@ -98,13 +97,15 @@ kubectl apply -f local-litmus-chaos-enable.yml
 ![add-pod-delete](../assets/tutorials/podtato-head/add-pod-delete.png)
 
 3. Select the target application for the `pod-delete` chaos fault
+
 - App Kind: `deployment`
 - App Namespace: `podtato-kubectl`
 - App Label: `app=podtato-head-hat`
 
 ![select-target-application](../assets/tutorials/podtato-head/select-target-application.png)
 
 4. Add the probe to the `pod-delete` chaos fault
+
 - Probe Name: `check-podtato-head-hat-pod`
 - Mode: `EOT`
 
@@ -123,4 +124,4 @@ kubectl apply -f local-litmus-chaos-enable.yml
 ---
 
 Congratulations! 🎉 You've successfully completed the tutorial.  
-Continue exploring more tutorials to enjoy your journey with LitmusChaos! 🚀  
+Continue exploring more tutorials to enjoy your journey with LitmusChaos! 🚀