coreboot configs: remove coreboot serial console output logging (slow…

…s down boot outside of debugging use case)

Signed-off-by: Thierry Laurion <[email protected]>

config/coreboot-optiplex-7019_9010-maximized.config

@@ -116,14 +116,13 @@ CONFIG_FMDFILE=""
 # CONFIG_NO_POST is not set
 CONFIG_MAINBOARD_VENDOR="Dell Inc."
 CONFIG_CBFS_SIZE=0xBE4FFF
-CONFIG_CONSOLE_SERIAL=y
+# CONFIG_CONSOLE_SERIAL is not set
 CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=1600
 CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=2560
 CONFIG_MAX_CPUS=8
 CONFIG_ONBOARD_VGA_IS_PRIMARY=y
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
-CONFIG_UART_FOR_CONSOLE=0
 CONFIG_DEVICETREE="variants/baseboard/devicetree.cb"
 # CONFIG_VBOOT is not set
 CONFIG_VARIANT_DIR="optiplex_9010_sff"
@@ -174,7 +173,6 @@ CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
-CONFIG_TTYS0_BAUD=115200
 CONFIG_D3COLD_SUPPORT=y
 CONFIG_PCIEXP_ASPM=y
 CONFIG_PCIEXP_L1_SUB_STATE=y
@@ -544,27 +542,10 @@ CONFIG_RTC=y
 CONFIG_BOOTBLOCK_CONSOLE=y
 CONFIG_POSTCAR_CONSOLE=y
 CONFIG_SQUELCH_EARLY_SMP=y
-
-#
-# I/O mapped, 8250-compatible
-#
-CONFIG_TTYS0_BASE=0x3f8
-
-#
-# Serial port base address = 0x3f8
-#
-# CONFIG_CONSOLE_SERIAL_921600 is not set
-# CONFIG_CONSOLE_SERIAL_460800 is not set
-# CONFIG_CONSOLE_SERIAL_230400 is not set
-CONFIG_CONSOLE_SERIAL_115200=y
-# CONFIG_CONSOLE_SERIAL_57600 is not set
-# CONFIG_CONSOLE_SERIAL_38400 is not set
-# CONFIG_CONSOLE_SERIAL_19200 is not set
-# CONFIG_CONSOLE_SERIAL_9600 is not set
-CONFIG_TTYS0_LCS=3
 # CONFIG_SPKMODEM is not set
 # CONFIG_CONSOLE_NE2K is not set
 CONFIG_CONSOLE_CBMEM=y
+# CONFIG_CONSOLE_CBMEM_DUMP_TO_UART is not set
 # CONFIG_CONSOLE_SPI_FLASH is not set
 # CONFIG_CONSOLE_I2C_SMBUS is not set
 # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set

config/coreboot-optiplex-7019_9010_TXT-maximized.config

@@ -116,14 +116,13 @@ CONFIG_FMDFILE=""
 # CONFIG_NO_POST is not set
 CONFIG_MAINBOARD_VENDOR="Dell Inc."
 CONFIG_CBFS_SIZE=0xBE4FFF
-CONFIG_CONSOLE_SERIAL=y
+# CONFIG_CONSOLE_SERIAL is not set
 CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=1600
 CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=2560
 CONFIG_MAX_CPUS=8
 CONFIG_ONBOARD_VGA_IS_PRIMARY=y
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
-CONFIG_UART_FOR_CONSOLE=0
 CONFIG_DEVICETREE="variants/baseboard/devicetree.cb"
 # CONFIG_VBOOT is not set
 CONFIG_VARIANT_DIR="optiplex_9010_sff"
@@ -174,7 +173,6 @@ CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
-CONFIG_TTYS0_BAUD=115200
 CONFIG_D3COLD_SUPPORT=y
 CONFIG_PCIEXP_ASPM=y
 CONFIG_PCIEXP_L1_SUB_STATE=y
@@ -558,27 +556,10 @@ CONFIG_RTC=y
 CONFIG_BOOTBLOCK_CONSOLE=y
 CONFIG_POSTCAR_CONSOLE=y
 CONFIG_SQUELCH_EARLY_SMP=y
-
-#
-# I/O mapped, 8250-compatible
-#
-CONFIG_TTYS0_BASE=0x3f8
-
-#
-# Serial port base address = 0x3f8
-#
-# CONFIG_CONSOLE_SERIAL_921600 is not set
-# CONFIG_CONSOLE_SERIAL_460800 is not set
-# CONFIG_CONSOLE_SERIAL_230400 is not set
-CONFIG_CONSOLE_SERIAL_115200=y
-# CONFIG_CONSOLE_SERIAL_57600 is not set
-# CONFIG_CONSOLE_SERIAL_38400 is not set
-# CONFIG_CONSOLE_SERIAL_19200 is not set
-# CONFIG_CONSOLE_SERIAL_9600 is not set
-CONFIG_TTYS0_LCS=3
 # CONFIG_SPKMODEM is not set
 # CONFIG_CONSOLE_NE2K is not set
 CONFIG_CONSOLE_CBMEM=y
+# CONFIG_CONSOLE_CBMEM_DUMP_TO_UART is not set
 # CONFIG_CONSOLE_SPI_FLASH is not set
 # CONFIG_CONSOLE_I2C_SMBUS is not set
 # CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set