Skip to content

ATAC-seq peak-calling, QC and differential analysis pipeline

License

Notifications You must be signed in to change notification settings

li1311139481/atacseq

 
 

Repository files navigation

nf-core/atacseq nf-core/atacseq

AWS CICite with Zenodo

Nextflow run with conda run with docker run with singularity Launch on Nextflow Tower

Get help on SlackFollow on TwitterWatch on YouTube

Introduction

nfcore/atacseq is a bioinformatics analysis pipeline used for ATAC-seq data.

The pipeline is built using Nextflow, a workflow tool to run tasks across multiple compute infrastructures in a very portable manner. It uses Docker/Singularity containers making installation trivial and results highly reproducible. The Nextflow DSL2 implementation of this pipeline uses one container per process which makes it much easier to maintain and update software dependencies. Where possible, these processes have been submitted to and installed from nf-core/modules in order to make them available to all nf-core pipelines, and to everyone within the Nextflow community!

On release, automated continuous integration tests run the pipeline on a full-sized dataset on the AWS cloud infrastructure. This ensures that the pipeline runs on AWS, has sensible resource allocation defaults set to run on real-world datasets, and permits the persistent storage of results to benchmark between pipeline releases and other analysis sources.The results obtained from the full-sized test can be viewed on the nf-core website.

Pipeline summary

  1. Raw read QC (FastQC)
  2. Adapter trimming (Trim Galore!)
  3. Choice of multiple aligners 1.(BWA) 2.(Chromap). For paired-end reads only working until mapping steps, see here 3.(Bowtie2) 4.(STAR)
  4. Mark duplicates (picard)
  5. Merge alignments from multiple libraries of the same sample (picard)
    1. Re-mark duplicates (picard)
    2. Filtering to remove:
      • reads mapping to mitochondrial DNA (SAMtools)
      • reads mapping to blacklisted regions (SAMtools, BEDTools)
      • reads that are marked as duplicates (SAMtools)
      • reads that are not marked as primary alignments (SAMtools)
      • reads that are unmapped (SAMtools)
      • reads that map to multiple locations (SAMtools)
      • reads containing > 4 mismatches (BAMTools)
      • reads that are soft-clipped (BAMTools)
      • reads that have an insert size > 2kb (BAMTools; paired-end only)
      • reads that map to different chromosomes (Pysam; paired-end only)
      • reads that arent in FR orientation (Pysam; paired-end only)
      • reads where only one read of the pair fails the above criteria (Pysam; paired-end only)
    3. Alignment-level QC and estimation of library complexity (picard, Preseq)
    4. Create normalised bigWig files scaled to 1 million mapped reads (BEDTools, bedGraphToBigWig)
    5. Generate gene-body meta-profile from bigWig files (deepTools)
    6. Calculate genome-wide enrichment (deepTools)
    7. Call broad/narrow peaks (MACS2)
    8. Annotate peaks relative to gene features (HOMER)
    9. Create consensus peakset across all samples and create tabular file to aid in the filtering of the data (BEDTools)
    10. Count reads in consensus peaks (featureCounts)
    11. Differential accessibility analysis, PCA and clustering (R, DESeq2)
    12. Generate ATAC-seq specific QC html report (ataqv)
  6. Merge filtered alignments across replicates (picard)
    1. Re-mark duplicates (picard)
    2. Remove duplicate reads (SAMtools)
    3. Create normalised bigWig files scaled to 1 million mapped reads (BEDTools, bedGraphToBigWig)
    4. Call broad/narrow peaks (MACS2)
    5. Annotate peaks relative to gene features (HOMER)
    6. Create consensus peakset across all samples and create tabular file to aid in the filtering of the data (BEDTools)
    7. Count reads in consensus peaks relative to merged library-level alignments (featureCounts)
    8. Differential accessibility analysis, PCA and clustering (R, DESeq2)
  7. Create IGV session file containing bigWig tracks, peaks and differential sites for data visualisation (IGV).
  8. Present QC for raw read, alignment, peak-calling and differential accessibility results (ataqv, MultiQC, R)

Quick Start

  1. Install Nextflow (>=21.10.3)

  2. Install any of Docker, Singularity (you can follow this tutorial), Podman, Shifter or Charliecloud for full pipeline reproducibility (you can use Conda both to install Nextflow itself and also to manage software within pipelines. Please only use it within pipelines as a last resort; see docs).

  3. Download the pipeline and test it on a minimal dataset with a single command:

    nextflow run nf-core/atacseq -profile test,YOURPROFILE --outdir <OUTDIR>

    Note that some form of configuration will be needed so that Nextflow knows how to fetch the required software. This is usually done in the form of a config profile (YOURPROFILE in the example command above). You can chain multiple config profiles in a comma-separated string.

    • The pipeline comes with config profiles called docker, singularity, podman, shifter, charliecloud and conda which instruct the pipeline to use the named tool for software management. For example, -profile test,docker.
    • Please check nf-core/configs to see if a custom config file to run nf-core pipelines already exists for your Institute. If so, you can simply use -profile <institute> in your command. This will enable either docker or singularity and set the appropriate execution settings for your local compute environment.
    • If you are using singularity, please use the nf-core download command to download images first, before running the pipeline. Setting the NXF_SINGULARITY_CACHEDIR or singularity.cacheDir Nextflow options enables you to store and re-use the images from a central location for future pipeline runs.
    • If you are using conda, it is highly recommended to use the NXF_CONDA_CACHEDIR or conda.cacheDir settings to store the environments in a central location for future pipeline runs.
  4. Start running your own analysis!

    nextflow run nf-core/atacseq --input samplesheet.csv --outdir <OUTDIR> --genome GRCh37 -profile <docker/singularity/podman/shifter/charliecloud/conda/institute>

Documentation

The nf-core/atacseq pipeline comes with documentation about the pipeline usage, parameters and output.

Credits

The pipeline was originally written by Harshil Patel (@drpatelh) from Seqera Labs, Spain and converted to Nextflow DSL2 by Björn Langer (@bjlang) and Jose Espinosa-Carrasco (@JoseEspinosa) from The Comparative Bioinformatics Group at The Centre for Genomic Regulation, Spain under the umbrella of the BovReg project.

Many thanks to others who have helped out and contributed along the way too, including (but not limited to): @ewels, @apeltzer, @crickbabs, drewjbeh, @houghtos, @jinmingda, @ktrns, @MaxUlysse, @mashehu, @micans, @pditommaso and @sven1103.

Contributions and Support

If you would like to contribute to this pipeline, please see the contributing guidelines.

For further information or help, don't hesitate to get in touch on the Slack #atacseq channel (you can join with this invite).

Citations

If you use nf-core/atacseq for your analysis, please cite it using the following doi: 10.5281/zenodo.2634132

An extensive list of references for the tools used by the pipeline can be found in the CITATIONS.md file.

You can cite the nf-core publication as follows:

The nf-core framework for community-curated bioinformatics pipelines.

Philip Ewels, Alexander Peltzer, Sven Fillinger, Harshil Patel, Johannes Alneberg, Andreas Wilm, Maxime Ulysse Garcia, Paolo Di Tommaso & Sven Nahnsen.

Nat Biotechnol. 2020 Feb 13. doi: 10.1038/s41587-020-0439-x.

About

ATAC-seq peak-calling, QC and differential analysis pipeline

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Nextflow 61.7%
  • Groovy 15.8%
  • Python 10.8%
  • R 9.6%
  • Perl 1.3%
  • HTML 0.8%