Fmp Capsule Dependency Introduction

Introduction

There are situations where a platform may have separately updatable firmware components (e.g. motherboard, BMC, EC, etc.) and in some cases, there may be dependencies among them. For instance, FWx requires FWy to be at least version 2.0 to install. Today, we don’t have a way to express that in our infrastructure. Fmp capsule dependency attempts to add that capability through minor changes in the FMP capsule as well as a minor enhancement to FmpDxe driver and FmpDeviceLib. Capsule Dependency is an incremental change of FMP capsule (Signed Capsule) to evaluate the capsule’s version dependency requirement is satisfied or not before applying the update. Full feature is defined in UEFI Spec 2.8.

Implementation Details

Updated Capsule Update Work Flow

Last Attempt Status Extension

Extend ESRT status information to express if a capsule could not applied because its dependency could not be satisfied.

#define LAST_ATTEMPT_STATUS_ERROR_UNSATISFIED_DEPENDENCIES 0x00000008

Dependency Evaluation

Dependency evaluation process is a cross check between the capsule data and all existing FMP protocal instances in system.

Check 1 : Validate platform exsiting Fmp Images' version to satisfy the dependency expression in capsule image.
Check 2 : Validate the capsule image version to satify all the platform existing Fmp images' dependency expression.

FmpDeviceLib Extension

To support the Dependency Evaluation Check 2, Fmp device must have the capability to save its own dependency expression and provide the dependency expression to Fmp DXE driver. The parameter Image of FmpDeviceSetImage and FmpDeviceGetImage function is extended to contain the dependency expression op-codes.

FmpDeviceSetImage is responsible for retrieving the dependency from the parameter Image and saving it to a protected storage.
FmpDeviceGetImage is responsible for retrieving the dependency from the storage where FmpDeviceSetImage saves dependency and combining it with the Fmp Payload Image into one buffer which is returned to the caller. This dependency will be populated into EFI_FIRMWARE_IMAGE_DESCRIPTOR and used for Dependency Evaluation Check 2.
FmpDeviceGetAttributes must set the bit IMAGE_ATTRIBUTE_DEPENDENCY to indicate the Fmp device has dependency expression associcated with the Fmp image and supports Fmp Capsule Dependency feature.

Enable Fmp Capsule Dependency

How to enable capsule dependency feature for an Fmp Device:

Please refer to the following sample code which uses EFI variable as the storage of Fmp dependency op-codes. Notice: The EFI variable must be locked before EndOfDxe. If no such implementation, only Dependency Evaluation Check 1 is supported.

1. FmpDeviceSetImage

EFI_STATUS
SaveFmpDependencyToStorage (
  IN  EFI_FIRMWARE_IMAGE_DEP  *Depex,
  IN  UINTN                   DepexSize
  )
{
  EFI_STATUS Status;

  if (DepexSize > 0 && Depex == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Save dependency op-codes to "FmpDepex" variable.
  //
  Status = gRT->SetVariable (
                  L"FmpDepex",
                  &gEfiCallerIdGuid,
                  EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS,
                  DepexSize,
                  (VOID *)Depex
                  );

  return Status;
}

EFI_STATUS
EFIAPI
FmpDeviceSetImage (
  IN  CONST VOID                                     *Image,
  IN  UINTN                                          ImageSize,
  IN  CONST VOID                                     *VendorCode,
  IN  EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS  Progress,
  IN  UINT32                                         CapsuleFwVersion,
  OUT CHAR16                                         **AbortReason
  )
{
  EFI_STATUS Status;
  UINTN      FmpDepexSize;
  UINTN      FmpPayloadImageSize;

  Status = FmpDeviceGetSize (&FmpPayloadImageSize);
  if (!EFI_ERROR (FmpPayloadImageSize) && ImageSize >= FmpPayloadImageSize) {
    //
    // Save dependency op-codes.
    //
    FmpDepexSize = ImageSize - FmpPayloadImageSize;
    Status = SaveFmpDependencyToStorage ((EFI_FIRMWARE_IMAGE_DEP *)Image, FmpDepexSize);
  } 

  //
  // Continue to set image...
  //
}

2. FmpDeviceGetImage

EFI_FIRMWARE_IMAGE_DEP *
GetFmpDependencyFromStorage (
  OUT UINTN  *DepexSize
  )
{
  EFI_STATUS             Status;
  EFI_FIRMWARE_IMAGE_DEP *Depex;

  Depex = NULL;

  //
  // Get dependency from variable.
  //
  Status = GetVariable2 (
             L"FmpDepex",
             &gEfiCallerIdGuid,
             (VOID **) &Depex,
             DepexSize
             );

  return Depex;
}

EFI_STATUS
EFIAPI
FmpDeviceGetImage (
  IN OUT VOID   *Image,
  IN OUT UINTN  *ImageSize
  )
{
  EFI_FIRMWARE_IMAGE_DEP  *FmpDepex;
  UINTN                   FmpDepexSize;
  UINTN                   FmpPayloadImageSize;

  FmpDepex = GetFmpDependencyFromStorage (&FmpDepexSize);
  Status = FmpDeviceGetSize (&FmpPayloadImageSize);
  if (EFI_ERROR(Status)) {
    return EFI_ABORTED;
  }

  //
  // Make sure the buffer is big enough to hold the device image
  //
  if (*ImageSize < FmpPayloadImageSize + FmpDepexSize) {
    *ImageSize = FmpPayloadImageSize + FmpDepexSize;
    return EFI_BUFFER_TOO_SMALL;
  }

  *ImageSize = FmpPayloadImageSize + FmpDepexSize;
  //
  // Copy the FmpDepex to the buffer
  //
  CopyMem (Image, FmpDepex, FmpDepexSize);
  //
  // Continue to Copy the Fmp Payload image to the buffer...
  //

}

3. FmpDeviceGetAttributes

EFI_STATUS
EFIAPI
FmpDeviceGetAttributes (
  IN OUT UINT64  *Supported,
  IN OUT UINT64  *Setting
  )
{
  if (Supported == NULL || Setting == NULL) {
    return EFI_INVALID_PARAMETER;
  }
  //
  // Set IMAGE_ATTRIBUTE_DEPENDENCY to support capsule dependency.
  //
  *Supported = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE         |
                IMAGE_ATTRIBUTE_RESET_REQUIRED          |
                IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED |
                IMAGE_ATTRIBUTE_DEPENDENCY              |
                IMAGE_ATTRIBUTE_IN_USE
                );
  *Setting   = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE         |
                IMAGE_ATTRIBUTE_RESET_REQUIRED          |
                IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED |
                IMAGE_ATTRIBUTE_DEPENDENCY
                );

  return EFI_SUCCESS;
}

How to generate capsule with dependency feature:

1. Encode

Capsule generate tool supports to encode capsule dependencies through '-j' command with a JSON file, for example, to type following command in command prompt: GenerateCapsule.py -e -j Example.json -o Example.cap To add dependency feature, a "Dependencies" field in JSON file is required. For example:

{
    "Payloads": [
        {
            "Guid": "d9ca4062-985c-4084-8445-e104691dd66b",
            "FwVersion": "1",
            "LowestSupportedVersion": "1",
            "MonotonicCount": "3",
            "HardwareInstance": "0",
            "UpdateImageIndex": "3",
            "Payload": "Payload1.bin",
            "OpenSslSignerPrivateCertFile": "TestCert.pem",
            "OpenSslOtherPublicCertFile": "TestSub.pub.pem",
            "OpenSslTrustedPublicCertFile": "TestRoot.pub.pem",
            "SigningToolPath": "C:\\OpenSSL",
            "Dependencies": "aa2fd162-59d1-4d73-bd2c-c6f9f353cdda >= 0x00000001 && 58e21611-44c0-44b7-bc43-488f45cd1e97 >= 0x00000002"
        },
        {
            "Guid": "1559cc9e-ee39-4ae7-aa1f-1b84570da3cf",
            "FwVersion": "1",
            "LowestSupportedVersion": "1",
            "MonotonicCount": "2",
            "HardwareInstance": "0",
            "UpdateImageIndex": "1",
            "Payload": "Payload2.bin",
            "SignToolPfxFile": "TestCert.pfx",
            "SigningToolPath": "C:\\SigningTools",
            "Dependencies": "TRUE"
        }
    ]
}

The value of “Dependencies” field should be C style infix notation expression, the relations between firmware opcodes and expression operators/operands are listed below:

Fimware Opcode	Infix notation expression	Dependency Binary
0x00 (PUSH_GUID)	03e6ed9c-afd6-4762-9de7-d78da3c7179e	{0x00, {0x03e6ed9c, 0xafd6, 0x4762, {0x9d, 0xe7, 0xd7, 0x8d, 0xa3, 0xc7, 0x17, 0x9e}}
0x01 (PUSH_VERSION)	0x00000001	{0x01, 0x00000001}
0x02 (DECLARE_VERSION_NAME)	DECLARE “Fmp Device 1”	{0x02, “Fmp Device 1”}
0x03 (AND)	&&	{0x03}
0x04 (OR)	\|\|	{0x04}
0x05 (NOT)	~	{0x05}
0x06 (TRUE)	TRUE	{0x06}
0x07 (FALSE)	FALSE	{0x07}
0x08 (EQ)	==	{0x08}
0x09 (GT)	>	{0x09}
0x0A (GTE)	>=	{0x0A}
0x0B (LT)	<	{0x0B}
0x0C (LTE)	<=	{0x0C}
0x0D (END)		{0x0D}

Noted that Opcode 0x0D (END) will automatically added after dependency encoding.

The precedence of infix notation expression operators is listed below from high to low, and it’s followed the C language operator precedence.

() (brackets)
~ (NOT)
>=, >, <=, < (GTE, GT, LTE, LT)
== (EQ)
&& (OR)
|| (AND)

DECLARE "xxxx" is acting like comments, wherever it inserted in the infix notation expression, it will be converted as {DECLARE_VERSION_STRING, xxxx}.

All operators/operands in infix notation expression should split with spaces, except brackets.

Here are some example of dependency entry for all kinds of operators:

"Dependencies": "TRUE"

"Dependencies": "aa2fd162-59d1-4d73-bd2c-c6f9f353cdda >= 0x00000001 && 58e21611-44c0-44b7-bc43-488f45cd1e97 < 0x00000002"

"Dependencies": "aa2fd162-59d1-4d73-bd2c-c6f9f353cdda >= 0x00000001 || (58e21611-44c0-44b7-bc43-488f45cd1e97 < 0x00000002 && 567e834b-8310-4b33-ac76-967fbe51132c >= 0x00000003)"

"Dependencies": "aa2fd162-59d1-4d73-bd2c-c6f9f353cdda >= 0x00000001 DECLARE \"Fmp Device 1\""

2. Decode

Capsule dependency tool supports the dependencies decoding, for example, to type following command in command prompt: GenerateCapsule.py -d Example.cap -o Test All Decoded dependency expressions are written to Test.json for each payload.

3. Dump information

Dump info leverages Decode, for example, to type following command in command prompt: GenerateCapsule.py --dump-info Example.cap Here is an example for output dump information.

--------
EFI_FIRMWARE_IMAGE_AUTHENTICATION.MonotonicCount                = 0000000000000000
EFI_FIRMWARE_IMAGE_AUTHENTICATION.AuthInfo.Hdr.dwLength         = 00000B03
EFI_FIRMWARE_IMAGE_AUTHENTICATION.AuthInfo.Hdr.wRevision        = 0200
EFI_FIRMWARE_IMAGE_AUTHENTICATION.AuthInfo.Hdr.wCertificateType = 0EF1
EFI_FIRMWARE_IMAGE_AUTHENTICATION.AuthInfo.CertType             = 4AAFD29D-68DF-49EE-8AA9-347D375665A7
sizeof (EFI_FIRMWARE_IMAGE_AUTHENTICATION.AuthInfo.CertData)    = 00000AEB
sizeof (Payload)                                                = 00000053
--------
EFI_FIRMWARE_IMAGE_DEP.Dependencies = {
    00, 582DF9AB-E626-42A8-A11C-3FEA098FF3FA,
    01, 0x00000001,
    02, Fmp Device 1,
    0B,
    0D,
}
sizeof (EFI_FIRMWARE_IMAGE_DEP.Dependencies)    = 0000002E
sizeof (Payload)                                = 00000025
--------
FMP_PAYLOAD_HEADER.Signature              = 3153534D (MSS1)
FMP_PAYLOAD_HEADER.HeaderSize             = 00000010

How to test capsule dependency feature:

For example, there are two Fmp devices in the system:

Device	Version	GUID
Sample Device A	0x01	79179BFD-704D-4C90-9E02-0AB8D968C18A
Sample Device B	0x01	149DA854-7D19-4FAA-A91E-862EA1324BE6

Now Device A has an update to version 0x02 that requires the version of Device B to be at least 0x02. However B's version is 0x01 in the system, so this update must fail.

Create Device A's capsule with the dependency on Device B:

# GenerateCapsule.py -e -j A_v2.json -o A_v2.cap

Example of A_v2.json:

{
    "Payloads": [
        {
            "Guid": "79179BFD-704D-4C90-9E02-0AB8D968C18A",
            "FwVersion": "2",
            "LowestSupportedVersion": "1",
            "MonotonicCount": "3",
            "HardwareInstance": "0",
            "UpdateImageIndex": "3",
            "Payload": "A_v2.bin",
            "OpenSslSignerPrivateCertFile": "TestCert.pem",
            "OpenSslOtherPublicCertFile": "TestSub.pub.pem",
            "OpenSslTrustedPublicCertFile": "TestRoot.pub.pem",
            "SigningToolPath": "C:\\OpenSSL",
            "Dependencies": "149DA854-7D19-4FAA-A91E-862EA1324BE6 >= 0x00000002"
        }
    ]
}

Enter UEFI shell and update Device A by CapsuleApp.efi:

Shell> CapsuleApp.efi A_v2.cap

After the update finishes, enter UEFI shell and check the update status. The expectation is that update fails with UNSATISFIED_DEPENDENCIE error status.

Shell> CapsuleApp -E
##############
# ESRT TABLE #
##############
EFI_SYSTEM_RESOURCE_TABLE:
FwResourceCount    - 0x2
FwResourceCountMax - 0x6
FwResourceVersion  - 0x1
EFI_SYSTEM_RESOURCE_ENTRY (0):
  FwClass                  - 79179BFD-704D-4C90-9E02-0AB8D968C18A
  FwType                   - 0x2 (DeviceFirmware)
  FwVersion                - 0x1
  LowestSupportedFwVersion - 0x1
  CapsuleFlags             - 0x0
  LastAttemptVersion       - 0x2
  LastAttemptStatus        - 0x8 (Error: Unsatisfied Dependencies)

If Device B's version is changed to 0x02, the update should success and the status would be:

  FwClass                  - 79179BFD-704D-4C90-9E02-0AB8D968C18A
  FwType                   - 0x2 (DeviceFirmware)
  FwVersion                - 0x2
  LowestSupportedFwVersion - 0x1
  CapsuleFlags             - 0x0
  LastAttemptVersion       - 0x2
  LastAttemptStatus        - 0x0 (Success)

Wiki Navigation:

Home
Getting Started with EDK II
EDK II Platforms
EDK II Documents
EDK II Release Planning
Reporting Issues
Reporting Security Issues
Community Information
Additional Projects & Tasks
Training
Community Support
Community Virtual Meetings

Provide feedback

Saved searches

Use saved searches to filter your results more quickly