Role-based Access Control (RBAC)

A shortcut to a modular and easily pluggable dapp architecture.

Enable the modular plug and play (PnP) architecture for your dapp by incorporating the role-based access control (RBAC) into the smart contracts.

Technical Overview

Role-based Access Control (RBAC), or simply Access Control, is the base parent contract to be inherited by other smart contracts wishing to enable the RBAC feature. It provides an API to check if a specific operation is permitted globally and/or if a particular user has a permission to execute it.

It deals with two main entities: features and roles. Features are designed to be used to enable/disable public functions of the smart contract (used by a wide audience). User roles are designed to control the access to restricted functions of the smart contract (used by a limited set of maintainers).

When designing the RBAC-enabled contract, the best practice is to make all public mutative functions controlled with their corresponding feature flags, which can be enabled/disabled during smart contact deployment, setup process, and, optionally, during contract operation.

Restricted access functions must be controlled by their corresponding user roles/permissions and usually can be executed by the deployer during smart contract deployment and setup process.

After deployment is complete and smart contract setup is verified the deployer should enable the feature flags and revoke own permissions to control these flags, as well as permissions to execute restricted access functions.

It is possible that smart contract functionalities are enabled in phases, but the intention is that eventually it is also possible to set the smart contract to be uncontrolled by anyone and be fully decentralized.

It is also possible that the deployer shares its admin permissions with other addresses during the deployment and setup process, but eventually all these permissions can be revoked from all the addresses involved.

Following diagram summarizes stated below:

Diagram 1. RBAC-enabled smart contract deployment and setup phases. Contract evolves from the fully controlled in the initial phases of the setup process to the fully decentralized and uncontrolled in the end.

It is important to note that it is not necessary, and not recommended to wait until the last “Setup Complete” phase is executed to consider the protocol fully operational in the mainnet. In fact, the best practice is to do the launch after the deployer permissions are revoked, but there are admin multisig accounts with the full permissions to control the protocol. This kind of approach allows reacting to the security issues, which are more likely to happen in the beginning of the protocol operation.

Special Permissions Mapping

Special permissions mapping, userRoles, stores special permissions of the smart contract administrators and helpers. The mapping is a part of AccessControl and is inherited by the smart contracts using it.

The value stored in the mapping is a 256 bits unsigned integer, each bit of that integer represents a particular permission. We call a set of permissions a role. Usually, roles are defined as 32 bits unsigned integer constants, but extension to 255 bits is possible.

Permission with the bit 255 set is a special one. It corresponds to the access manager role ROLE_ACCESS_MANAGER defined on the Access Control smart contract and allows accounts having that bit set to grant/revoke their permissions to other addresses and to enable/disable corresponding features of the smart contract (to update self address “this” role – see below).

Self address “this” mapping is a special one. It represents the deployed smart contract itself and defines features enabled on it. Features control what public functions are enabled and how they behave. Usually, features are defined as 32 bits unsigned integer constants, but extension to 255 bits is possible.

Access Control is a shared parent for other smart contracts which are free to use any strategy to introduce their features and roles. Usually, smart contracts use different values for all the features and roles (see the table in the next section).

Access manager may revoke its own permissions, including the bit 255. Eventually that allows an access manager to let the smart contract “float freely” and be controlled only by the community (via DAO) or by no one at all.

Comparing with OpenZeppelin

Both our and OpenZeppelin Access Control implementations feature a similar API to check/know "who is allowed to do this thing".

Zeppelin implementation is more flexible:

• it allows setting unlimited number of roles, while current is limited to 256 different roles
• it allows setting an admin for each role, while current allows having only one global admin

Our implementation is more lightweight:

• it uses only 1 bit per role, while Zeppelin uses 256 bits
• it allows setting up to 256 roles at once, in a single transaction, while Zeppelin allows setting only one role in a single transaction

Installation

npm i -D @lazy-sol/access-control

Usage

Creating a Restricted Function

Restricted function is a function with a public Solidity modifier access to which is restricted so that only a pre-configured set of accounts can execute it.

1. Enable role-based access control (RBAC) in a new smart contract by inheriting the RBAC contract from the AccessControl contract:

   import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
   import "@lazy-sol/access-control/contracts/AccessControl.sol";
   
   /**
    * @title Simple ERC20 Implementation
    *
    * @notice Zeppelin based ERC20 implementation with the RBAC support
    *
    * @author Lazy So[u]l
    */
   contract MyERC20Token is ERC20, AccessControl {
       
       ...
       
   }

2. Define an access control role with the unique integer value:

       ...
       
       /**
        * @notice Token creator is responsible for creating (minting)
        tokens to an arbitrary address
        * @dev Role ROLE_TOKEN_CREATOR allows minting tokens
        (calling `mint` function)
        */
       uint32 public constant ROLE_TOKEN_CREATOR = 0x0001_0000;
       
       ...

3. Add the require(isSenderInRole(ROLE_TOKEN_CREATOR), "access denied")" check into the function body:

       ...
       
       /**
        * @inheritdoc ERC20
        */
       function _mint(address _to, uint256 _value) internal virtual override {
           // check if caller has sufficient permissions to mint tokens
           require(isSenderInRole(ROLE_TOKEN_CREATOR), "access denied");
   
           // delegate to super implementation
           super._mint(_to, _value);
       }
       
       ...

   Note: you could also use the restrictedTo modifier in the function declaration instead of the require in the function body if you don't need a custom error message:

       ...
       
       /**
        * @inheritdoc ERC20
        */
       function _mint(address _to, uint256 _value) internal virtual override restrictedTo(ROLE_TOKEN_CREATOR) {
           // delegate to super implementation
           super._mint(_to, _value);
       }
       
       ...

Examples: ERC20Impl, ERC721Impl.

Adopting an Already Deployed OZ Ownable Contract to the RBAC Model

OpenZeppelin Ownable is one of the most popular access control models since it is very easy to understand and to use. Many deployed contracts are using this model, and when the time comes to switch to a more flexible model, OwnableToAccessControlAdapter comes into play.

Installation Flow

Prerequisite: deployed OZ Ownable contract (target contract) address (target_address)

1. Deploy the AccessControl Adapter bound to the already deployed OZ Ownable contract (specify the target OZ Ownable contract address in the constructor upon the deployment)

   const adapter = await (artifacts.require("OwnableToAccessControlAdapter")).new(target_address);

2. Define what Ownable-restricted public functions on the target contract you'd like to be able to provide access to through the adapter contract

3. Map every such function with the role required to execute it using updateAccessRole() function
   For example, to be able to provide an access to the transferOwnership(address) function, you could do

   const ROLE_TRANSFER_OWNERSHIP_MANAGER = 0x00010000;
   await adapter.updateAccessRole("transferOwnership(address)", ROLE_TRANSFER_OWNERSHIP_MANAGER);

4. Provide the roles to the corresponding operators as you would usually do with AccessControl
   For example, if you wish an address 0x00000000000000000000000000000000000Ff1CE to grant an access to the transferOwnership(address) function on the target, you could do

   const operator = "0x00000000000000000000000000000000000Ff1CE";
   await adapter.updateRole(operator, ROLE_TRANSFER_OWNERSHIP_MANAGER);

5. Transfer the ownership of the target contract to the deployed AccessControl Adapter contract
   Note that you can also do steps 2-4 after the step 5

Usage Flow

Prerequisite: installed AccessControl Adapter with the access to at least one restricted target contract function configured

To execute the restricted access function on the target contract via the AccessControl Adapter

1. Use target contract ABI to construct a low-level function call calldata
   For example, to construct the transferOwnership() function calldata to transfer the ownership to the 0x00000000000000000000000000000000DEAdc0De address, you could do

   const to = "0x00000000000000000000000000000000DEAdc0De";
   const calldata = target.contract.methods.transferOwnership(to).encodeABI();

2. Execute a low-level function call on the AccessControl Adapter contract using the constructed calldata
   For example, to execute the transferOwnership() function (prepared in step 1), you could do

     await web3.eth.sendTransaction({
         from: operator,
         to: adapter.address,
         data: calldata,
     }

3. It is also ok to add an ether to the transaction by adding a value field to the sendTransaction call, as well as sending plain ether transfer transaction, as long as target contract has payable functions, and/or has a default payable receiver

Contributing

Please see the Contribution Guide document to get understanding on how to report issues, contribute to the source code, fix bugs, introduce new features, etc.

(c) 2017–2024 Basil Gorin